target/linux/ramips/dts/mt7621_totolink_x5000r.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "totolink,x5000r", "mediatek,mt7621-soc";
  10         model = "TOTOLINK X5000R";
  11
  12         aliases {
  13                 led-boot = &led_sys;
  14                 led-failsafe = &led_sys;
  15                 led-running = &led_sys;
  16                 led-upgrade = &led_sys;
  17                 label-mac-device = &gmac0;
  18                 serial0 = &uartlite;
  19         };
  20
  21         chosen {
  22                 stdout-path = "serial0:115200n8";
  23                 bootargs = "console=ttyS0,115200n8";
  24         };
  25
  26         leds {
  27                 compatible = "gpio-leds";
  28
  29                 led_sys: sys {
  30                         label = "blue:sys";
  31                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  32                 };
  33         };
  34
  35         keys {
  36                 compatible = "gpio-keys";
  37
  38                 reset {
  39                         label = "reset";
  40                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  41                         debounce-interval = <60>;
  42                         linux,code = <KEY_RESTART>;
  43                 };
  44         };
  45 };
  46
  47 &spi0 {
  48         status = "okay";
  49
  50         flash@0 {
  51                 compatible = "jedec,spi-nor";
  52                 reg = <0>;
  53                 spi-max-frequency = <50000000>;
  54                 m25p,fast-read;
  55
  56                 partitions {
  57                         compatible = "fixed-partitions";
  58                         #address-cells = <1>;
  59                         #size-cells = <1>;
  60
  61                         partition@0 {
  62                                 label = "u-boot";
  63                                 reg = <0x0 0x30000>;
  64                                 read-only;
  65                         };
  66
  67                         partition@30000 {
  68                                 label = "u-boot-env";
  69                                 reg = <0x30000 0x10000>;
  70                                 read-only;
  71                         };
  72
  73                         factory: partition@40000 {
  74                                 label = "factory";
  75                                 reg = <0x40000 0x10000>;
  76                                 read-only;
  77                         };
  78
  79                         partition@50000 {
  80                                 compatible = "denx,uimage";
  81                                 label = "firmware";
  82                                 reg = <0x50000 0xfb0000>;
  83                         };
  84                 };
  85         };
  86 };
  87
  88 &pcie {
  89         status = "okay";
  90 };
  91
  92 &pcie1 {
  93         wifi@0,0 {
  94                 compatible = "mediatek,mt76";
  95                 reg = <0x0000 0 0 0 0>;
  96                 mediatek,mtd-eeprom = <&factory 0x0000>;
  97         };
  98 };
  99
 100 &gmac0 {
 101         mtd-mac-address = <&factory 0xe000>;
 102 };
 103
 104 &switch0 {
 105         ports {
 106                 port@0 {
 107                         status = "okay";
 108                         label = "lan1";
 109                 };
 110
 111                 port@1 {
 112                         status = "okay";
 113                         label = "lan2";
 114                 };
 115
 116                 port@2 {
 117                         status = "okay";
 118                         label = "lan3";
 119                 };
 120
 121                 port@3 {
 122                         status = "okay";
 123                         label = "lan4";
 124                 };
 125
 126                 port@4 {
 127                         status = "okay";
 128                         label = "wan";
 129                         mtd-mac-address = <&factory 0xe006>;
 130                 };
 131         };
 132 };
 133
 134 &state_default {
 135         gpio {
 136                 groups = "i2c", "wdt";
 137                 function = "gpio";
 138         };
 139 };