target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "wavlink,wl-wn531a6", "mediatek,mt7621-soc";
  10         model = "Wavlink WL-WN531A6";
  11
  12         aliases {
  13                 led-boot = &led_status_red;
  14                 led-failsafe = &led_status_red;
  15                 led-running = &led_status_blue;
  16                 led-upgrade = &led_status_red;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys";
  21
  22                 reset {
  23                         label = "Reset Button";
  24                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  25                         linux,code = <KEY_RESTART>;
  26                 };
  27
  28                 touch { /* RH6015C touch sensor -> GPIO 14 */
  29                         label = "Touch Button";
  30                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  31                         linux,code = <BTN_0>;
  32                 };
  33
  34                 turbo {
  35                         label = "Turbo Button";
  36                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
  37                         linux,code = <BTN_1>;
  38                 };
  39
  40                 wps {
  41                         label = "WPS Button";
  42                         gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_WPS_BUTTON>;
  44                 };
  45         };
  46
  47         leds {
  48                 compatible = "gpio-leds";
  49
  50                 led_status_blue: status_blue {
  51                         label = "blue:power";
  52                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  53                 };
  54
  55                 led_status_red: status_red {
  56                         label = "red:power";
  57                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  58                 };
  59
  60                 wifi2g {
  61                         label = "blue:wifi2g";
  62                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  63                         linux,default-trigger = "phy0tpt";
  64                 };
  65         };
  66 };
  67
  68 &i2c {
  69         status = "okay";
  70 };
  71
  72 &spi0 {
  73         status = "okay";
  74
  75         flash@0 {
  76                 compatible = "jedec,spi-nor";
  77                 reg = <0>;
  78                 spi-max-frequency = <40000000>;
  79
  80                 partitions {
  81                         compatible = "fixed-partitions";
  82                         #address-cells = <1>;
  83                         #size-cells = <1>;
  84
  85                         partition@0 {
  86                                 label = "u-boot";
  87                                 reg = <0x0 0x30000>;
  88                                 read-only;
  89                         };
  90
  91                         partition@30000 {
  92                                 label = "config";
  93                                 reg = <0x30000 0x10000>;
  94                                 read-only;
  95                         };
  96
  97                         factory: partition@40000 {
  98                                 label = "factory";
  99                                 reg = <0x40000 0x10000>;
 100                                 read-only;
 101                         };
 102
 103                         partition@50000 {
 104                                 compatible = "denx,uimage";
 105                                 label = "firmware";
 106                                 reg = <0x50000 0xeb0000>;
 107                         };
 108
 109                         partition@f00000 {
 110                                 label = "vendor";
 111                                 reg = <0xf00000 0x100000>;
 112                                 read-only;
 113                         };
 114                 };
 115         };
 116 };
 117
 118 &pcie {
 119         status = "okay";
 120 };
 121
 122 &pcie0 {
 123         mt76@0,0 {
 124                 compatible = "mediatek,mt76";
 125                 reg = <0x0000 0 0 0 0>;
 126                 mediatek,mtd-eeprom = <&factory 0x0>;
 127                 ieee80211-freq-limit = <2400000 2500000>;
 128         };
 129 };
 130
 131 &pcie1 {
 132         mt76@0,0 {
 133                 compatible = "mediatek,mt76";
 134                 reg = <0x0000 0 0 0 0>;
 135                 mediatek,mtd-eeprom = <&factory 0x8000>;
 136                 ieee80211-freq-limit = <5000000 6000000>;
 137         };
 138 };
 139
 140 &gmac0 {
 141         mtd-mac-address = <&factory 0xe000>;
 142 };
 143
 144 &switch0 {
 145         ports {
 146                 port@0 {
 147                         status = "okay";
 148                         label = "lan1";
 149                 };
 150
 151                 port@1 {
 152                         status = "okay";
 153                         label = "lan2";
 154                 };
 155
 156                 port@2 {
 157                         status = "okay";
 158                         label = "lan3";
 159                 };
 160
 161                 port@3 {
 162                         status = "okay";
 163                         label = "lan4";
 164                 };
 165
 166                 port@4 {
 167                         status = "okay";
 168                         label = "wan";
 169                         mtd-mac-address = <&factory 0xe006>;
 170                 };
 171         };
 172 };
 173
 174 &state_default {
 175         gpio {
 176                 groups = "rgmii2", "jtag", "wdt";
 177                 function = "gpio";
 178         };
 179 };
 180
 181 &uartlite2 {
 182         status = "okay";
 183 };