target/linux/ramips/dts/mt7621_xiaoyu_xy-c5.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "xiaoyu,xy-c5", "mediatek,mt7621-soc";
  10         model = "XiaoYu XY-C5";
  11
  12         aliases {
  13                 led-boot = &led_sys;
  14                 led-failsafe = &led_sys;
  15                 led-running = &led_sys;
  16                 led-upgrade = &led_sys;
  17                 label-mac-device = &ethernet;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,57600";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 work {
  28                         label = "xy-c5:green:work";
  29                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 led_sys: sys {
  33                         label = "xy-c5:green:sys";
  34                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  35                 };
  36         };
  37
  38         keys {
  39                 compatible = "gpio-keys";
  40
  41                 reset {
  42                         label = "reset";
  43                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_RESTART>;
  45                 };
  46         };
  47 };
  48
  49 &spi0 {
  50         status = "okay";
  51
  52         flash@0 {
  53                 compatible = "jedec,spi-nor";
  54                 reg = <0>;
  55                 spi-max-frequency = <25000000>;
  56
  57                 partitions {
  58                         compatible = "fixed-partitions";
  59                         #address-cells = <1>;
  60                         #size-cells = <1>;
  61
  62                         partition@0 {
  63                                 label = "u-boot";
  64                                 reg = <0x0 0x30000>;
  65                                 read-only;
  66                         };
  67
  68                         partition@30000 {
  69                                 label = "u-boot-env";
  70                                 reg = <0x30000 0x10000>;
  71                                 read-only;
  72                         };
  73
  74                         factory: partition@40000 {
  75                                 label = "factory";
  76                                 reg = <0x40000 0x10000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@50000 {
  81                                 compatible = "denx,uimage";
  82                                 label = "firmware";
  83                                 reg = <0x50000 0x1fb0000>;
  84                         };
  85                 };
  86         };
  87 };
  88
  89 &pcie {
  90         status = "okay";
  91 };
  92
  93 &ethernet {
  94         mtd-mac-address = <&factory 0x4>;
  95 };
  96
  97 &state_default {
  98         gpio {
  99                 ralink,group = "uart3", "wdt";
 100                 ralink,function = "gpio";
 101         };
 102 };