target/linux/ramips/dts/mt7628an_cudy_wr1000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "cudy,wr1000", "mediatek,mt7628an-soc";
  11         model = "Cudy WR1000";
  12
  13         aliases {
  14                 led-boot = &led_wps;
  15                 led-failsafe = &led_wps;
  16                 led-upgrade = &led_wps;
  17                 label-mac-device = &wmac;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28
  29                 wps {
  30                         label = "rfkill";
  31                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 lan1 {
  40                         label = "wr1000:blue:lan1";
  41                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 lan2 {
  45                         label = "wr1000:blue:lan2";
  46                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wan {
  50                         label = "wr1000:blue:wan";
  51                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 wlan2g {
  55                         label = "wr1000:blue:wlan2g";
  56                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  57                         linux,default-trigger = "phy0tpt";
  58                 };
  59
  60                 led_wps: wps {
  61                         label = "wr1000:blue:wps";
  62                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  63                 };
  64         };
  65 };
  66
  67 &spi0 {
  68         status = "okay";
  69
  70         flash@0 {
  71                 compatible = "jedec,spi-nor";
  72                 reg = <0>;
  73                 spi-max-frequency = <10000000>;
  74
  75                 partitions {
  76                         compatible = "fixed-partitions";
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79
  80                         partition@0 {
  81                                 label = "u-boot";
  82                                 reg = <0x0 0x30000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@30000 {
  87                                 label = "u-boot-env";
  88                                 reg = <0x30000 0x10000>;
  89                                 read-only;
  90                         };
  91
  92                         factory: partition@40000 {
  93                                 label = "factory";
  94                                 reg = <0x40000 0x10000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@50000 {
  99                                 compatible = "denx,uimage";
 100                                 label = "firmware";
 101                                 reg = <0x50000 0x7b0000>;
 102                         };
 103                 };
 104         };
 105 };
 106
 107 &state_default {
 108         gpio {
 109                 groups = "i2s", "refclk", "wdt", "p4led_an",
 110                                 "p3led_an", "p2led_an", "wled_an";
 111                 function = "gpio";
 112         };
 113 };
 114
 115 &pcie {
 116         status = "okay";
 117 };
 118
 119 &pcie0 {
 120         wifi@0,0 {
 121                 compatible = "mediatek,mt76";
 122                 reg = <0x0000 0 0 0 0>;
 123                 mediatek,mtd-eeprom = <&factory 0x8000>;
 124                 ieee80211-freq-limit = <5000000 6000000>;
 125
 126                 led {
 127                         led-sources = <2>;
 128                         led-active-low;
 129                 };
 130         };
 131 };
 132
 133 &wmac {
 134         status = "okay";
 135 };
 136
 137 &ethernet {
 138         mtd-mac-address = <&factory 0x28>;
 139 };
 140
 141 &esw {
 142         mediatek,portmap = <0x2f>;
 143 };