target/linux/ramips/dts/mt7628an_glinet_vixmini.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 /{
  10         compatible = "glinet,vixmini", "mediatek,mt7628an-soc";
  11         model = "GL.iNet VIXMINI";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_power: power {
  28                         label = "vixmini:blue:power";
  29                         default-state = "on";
  30                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 wlan {
  34                         label = "vixmini:white:wlan";
  35                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy0tpt";
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys-polled";
  42                 poll-interval = <20>;
  43
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_RESTART>;
  48                 };
  49         };
  50 };
  51
  52 &pinctrl {
  53         state_default: pinctrl0 {
  54                 gpio {
  55                         ralink,group = "wdt", "wled_an", "p1led_an";
  56                         ralink,function = "gpio";
  57                 };
  58         };
  59 };
  60
  61 &ethernet {
  62         mtd-mac-address = <&factory 0x4>;
  63 };
  64
  65 &wmac {
  66         status = "okay";
  67
  68         ralink,mtd-eeprom = <&factory 0x0>;
  69 };
  70
  71 &spi0 {
  72         status = "okay";
  73
  74         flash@0 {
  75                 compatible = "jedec,spi-nor";
  76                 reg = <0>;
  77                 spi-max-frequency = <10000000>;
  78
  79                 partitions {
  80                         compatible = "fixed-partitions";
  81                         #address-cells = <1>;
  82                         #size-cells = <1>;
  83
  84                         partition@0 {
  85                                 label = "u-boot";
  86                                 reg = <0x0 0x30000>;
  87                                 read-only;
  88                         };
  89
  90                         partition@30000 {
  91                                 label = "u-boot-env";
  92                                 reg = <0x30000 0x10000>;
  93                                 read-only;
  94                         };
  95
  96                         factory: partition@40000 {
  97                                 label = "factory";
  98                                 reg = <0x40000 0x10000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@50000 {
 103                                 compatible = "denx,uimage";
 104                                 label = "firmware";
 105                                 reg = <0x50000 0x7b0000>;
 106                         };
 107                 };
 108         };
 109 };