target/linux/ramips/dts/mt7628an_glinet_vixmini_microuter.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power_blue;
  11                 led-failsafe = &led_power_blue;
  12                 led-running = &led_power_blue;
  13                 led-upgrade = &led_power_blue;
  14
  15                 label-mac-device = &ethernet;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200";
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 led_power_blue: power {
  26                         /* Name is set device-specific */
  27                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 led_wlan_white: wlan {
  31                         /* Name is set device-specific */
  32                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  33                         linux,default-trigger = "phy0tpt";
  34                 };
  35         };
  36
  37         keys {
  38                 compatible = "gpio-keys";
  39
  40                 reset {
  41                         label = "reset";
  42                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_RESTART>;
  44                 };
  45         };
  46 };
  47
  48 &state_default {
  49         gpio {
  50                 groups = "wdt", "wled_an", "p1led_an";
  51                 function = "gpio";
  52         };
  53 };
  54
  55 &ethernet {
  56         mtd-mac-address = <&factory 0x4>;
  57 };
  58
  59 &wmac {
  60         status = "okay";
  61 };
  62
  63 &spi0 {
  64         status = "okay";
  65
  66         flash@0 {
  67                 compatible = "jedec,spi-nor";
  68                 reg = <0>;
  69                 spi-max-frequency = <10000000>;
  70
  71                 partitions: partitions {
  72                         compatible = "fixed-partitions";
  73                         #address-cells = <1>;
  74                         #size-cells = <1>;
  75
  76                         partition@0 {
  77                                 label = "u-boot";
  78                                 reg = <0x0 0x30000>;
  79                                 read-only;
  80                         };
  81
  82                         partition@30000 {
  83                                 label = "u-boot-env";
  84                                 reg = <0x30000 0x10000>;
  85                                 read-only;
  86                         };
  87
  88                         factory: partition@40000 {
  89                                 label = "factory";
  90                                 reg = <0x40000 0x10000>;
  91                                 read-only;
  92                         };
  93
  94                         /*
  95                          * Firmware-partition size is model-specific
  96                          * due to different flash sizes.
  97                          */
  98                         firmware_part: partition@50000 {
  99                                 compatible = "denx,uimage";
 100                                 label = "firmware";
 101                         };
 102                 };
 103         };
 104 };