target/linux/ramips/dts/mt7628an_hilink_hlk-7628n.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "hilink,hlk-7628n", "mediatek,mt7628an-soc";
  11         model = "HILINK HLK-7628N";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600";
  15         };
  16
  17         keys {
  18                 compatible = "gpio-keys";
  19
  20                 reset {
  21                         label = "reset";
  22                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  23                         linux,code = <KEY_RESTART>;
  24                 };
  25         };
  26
  27         leds {
  28                 compatible = "gpio-leds";
  29
  30                 wlan {
  31                         label = "hlk-7628n:green:wlan";
  32                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35 };
  36
  37 &state_default {
  38         gpio {
  39                 groups = "i2c";
  40                 function = "gpio";
  41         };
  42 };
  43
  44 &uart1 {
  45         status = "okay";
  46 };
  47
  48 &spi0 {
  49         status = "okay";
  50
  51         flash@0 {
  52                 compatible = "jedec,spi-nor";
  53                 reg = <0>;
  54                 spi-max-frequency = <10000000>;
  55
  56                 partitions {
  57                         compatible = "fixed-partitions";
  58                         #address-cells = <1>;
  59                         #size-cells = <1>;
  60
  61                         partition@0 {
  62                                 label = "u-boot";
  63                                 reg = <0x0 0x30000>;
  64                                 read-only;
  65                         };
  66
  67                         partition@30000 {
  68                                 label = "u-boot-env";
  69                                 reg = <0x30000 0x10000>;
  70                                 read-only;
  71                         };
  72
  73                         factory: partition@40000 {
  74                                 label = "factory";
  75                                 reg = <0x40000 0x10000>;
  76                                 read-only;
  77                         };
  78
  79                         partition@50000 {
  80                                 compatible = "denx,uimage";
  81                                 label = "firmware";
  82                                 reg = <0x50000 0x1fb0000>;
  83                         };
  84                 };
  85         };
  86 };
  87
  88 &wmac {
  89         status = "okay";
  90 };