target/linux/ramips/dts/mt7628an_mediatek_mt7628an-eval-board.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7628an-eval-board", "mediatek,mt7628an-soc";
   7         model = "Mediatek MT7628AN evaluation board";
   8 };
   9
  10 &pinctrl {
  11         state_default: pinctrl0 {
  12                 gpio {
  13                         ralink,group = "i2c";
  14                         ralink,function = "gpio";
  15                 };
  16         };
  17 };
  18
  19 &wmac {
  20         status = "okay";
  21 };
  22
  23 &spi0 {
  24         status = "okay";
  25
  26         m25p80@0 {
  27                 compatible = "jedec,spi-nor";
  28                 reg = <0>;
  29                 spi-max-frequency = <10000000>;
  30
  31                 partitions {
  32                         compatible = "fixed-partitions";
  33                         #address-cells = <1>;
  34                         #size-cells = <1>;
  35
  36                         partition@0 {
  37                                 label = "u-boot";
  38                                 reg = <0x0 0x30000>;
  39                                 read-only;
  40                         };
  41
  42                         partition@30000 {
  43                                 label = "u-boot-env";
  44                                 reg = <0x30000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         factory: partition@40000 {
  49                                 label = "factory";
  50                                 reg = <0x40000 0x10000>;
  51                                 read-only;
  52                         };
  53
  54                         partition@50000 {
  55                                 compatible = "denx,uimage";
  56                                 label = "firmware";
  57                                 reg = <0x50000 0x7b0000>;
  58                         };
  59                 };
  60         };
  61 };
  62
  63 &wmac {
  64         status = "okay";
  65 };