target/linux/ramips/dts/mt7628an_mediatek_mt7628an-eval-board.dts

   1 #include "mt7628an.dtsi"
   2
   3 / {
   4         compatible = "mediatek,mt7628an-eval-board", "mediatek,mt7628an-soc";
   5         model = "Mediatek MT7628AN evaluation board";
   6 };
   7
   8 &state_default {
   9         gpio {
  10                 groups = "i2c";
  11                 function = "gpio";
  12         };
  13 };
  14
  15 &spi0 {
  16         status = "okay";
  17
  18         flash@0 {
  19                 compatible = "jedec,spi-nor";
  20                 reg = <0>;
  21                 spi-max-frequency = <10000000>;
  22
  23                 partitions {
  24                         compatible = "fixed-partitions";
  25                         #address-cells = <1>;
  26                         #size-cells = <1>;
  27
  28                         partition@0 {
  29                                 label = "u-boot";
  30                                 reg = <0x0 0x30000>;
  31                                 read-only;
  32                         };
  33
  34                         partition@30000 {
  35                                 label = "u-boot-env";
  36                                 reg = <0x30000 0x10000>;
  37                                 read-only;
  38                         };
  39
  40                         factory: partition@40000 {
  41                                 compatible = "nvmem-cells";
  42                                 label = "factory";
  43                                 reg = <0x40000 0x10000>;
  44                                 #address-cells = <1>;
  45                                 #size-cells = <1>;
  46                                 read-only;
  47
  48                                 eeprom_factory_0: eeprom@0 {
  49                                         reg = <0x0 0x400>;
  50                                 };
  51                         };
  52
  53                         partition@50000 {
  54                                 compatible = "denx,uimage";
  55                                 label = "firmware";
  56                                 reg = <0x50000 0x7b0000>;
  57                         };
  58                 };
  59         };
  60 };
  61
  62 &wmac {
  63         status = "okay";
  64
  65         nvmem-cells = <&eeprom_factory_0>;
  66         nvmem-cell-names = "eeprom";
  67 };