target/linux/ramips/dts/mt7628an_netgear_r6120.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netgear,r6120", "mediatek,mt7628an-soc";
  10         model = "Netgear R6120";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &ethernet;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 lan {
  34                         label = "r6120:green:lan";
  35                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 led_power: power {
  39                         label = "r6120:green:power";
  40                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 wlan2g_green {
  44                         label = "r6120:green:wlan2g";
  45                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wlan2g_orange {
  49                         label = "r6120:orange:wlan2g";
  50                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wan_green {
  54                         label = "r6120:green:wan";
  55                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 wan_orange {
  59                         label = "r6120:orange:wan";
  60                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63
  64         usb-regulator {
  65                 compatible = "regulator-fixed";
  66
  67                 regulator-name = "USB-power";
  68                 gpio = <&gpio 45 GPIO_ACTIVE_HIGH>;
  69                 regulator-min-microvolt = <5000000>;
  70                 regulator-max-microvolt = <5000000>;
  71                 enable-active-high;
  72
  73                 regulator-always-on;
  74         };
  75 };
  76
  77 &state_default {
  78         gpio {
  79                 groups = "p0led_an", "p1led_an", "p2led_an",
  80                                "p3led_an", "p4led_an", "wdt",
  81                                "wled_an", "uart1";
  82                 function = "gpio";
  83         };
  84 };
  85
  86 &spi0 {
  87         status = "okay";
  88
  89         flash@0 {
  90                 compatible = "jedec,spi-nor";
  91                 reg = <0>;
  92                 spi-max-frequency = <10000000>;
  93
  94                 partitions {
  95                         compatible = "fixed-partitions";
  96                         #address-cells = <1>;
  97                         #size-cells = <1>;
  98
  99                         partition@0 {
 100                                 label = "u-boot";
 101                                 reg = <0x0 0x40000>;
 102                                 read-only;
 103                         };
 104
 105                         factory: partition@40000 {
 106                                 label = "factory";
 107                                 reg = <0x40000 0x20000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@60000 {
 112                                 label = "nvram";
 113                                 reg = <0x60000 0x30000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@90000 {
 118                                 compatible = "denx,uimage";
 119                                 label = "firmware";
 120                                 reg = <0x90000 0xf60000>;
 121                         };
 122
 123                         partition@ff0000 {
 124                                 label = "reserved";
 125                                 reg = <0xff0000 0x10000>;
 126                                 read-only;
 127                         };
 128                 };
 129         };
 130 };
 131
 132 &wmac {
 133         status = "okay";
 134 };
 135
 136 &ethernet {
 137         mtd-mac-address = <&factory 0x4>;
 138 };
 139
 140 &pcie {
 141         status = "okay";
 142 };
 143
 144 &pcie0 {
 145         wifi@0,0 {
 146                 reg = <0x0000 0 0 0 0>;
 147                 mediatek,mtd-eeprom = <&factory 0x8000>;
 148                 ieee80211-freq-limit = <5000000 6000000>;
 149                 mtd-mac-address = <&factory 0x4>;
 150                 mtd-mac-address-increment = <(2)>;
 151         };
 152 };