target/linux/ramips/dts/mt7628an_skylab_skw92a.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 /{
  10         compatible = "skylab,skw92a", "mediatek,mt7628an-soc";
  11         model = "SKYLAB SKW92A";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,57600";
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 led_power: wps {
  26                         label = "skw92a:green:wps";
  27                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 wlan {
  31                         label = "skw92a:green:wlan";
  32                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35
  36         keys {
  37                 compatible = "gpio-keys";
  38
  39                 reset {
  40                         label = "reset";
  41                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_RESTART>;
  43                 };
  44         };
  45 };
  46
  47 &state_default {
  48         gpio {
  49                 groups = "wdt", "refclk", "wled_an";
  50                 function = "gpio";
  51         };
  52 };
  53
  54 &ethernet {
  55         mtd-mac-address = <&factory 0x28>;
  56 };
  57
  58 &wmac {
  59         status = "okay";
  60 };
  61
  62 &spi0 {
  63         status = "okay";
  64
  65         flash@0 {
  66                 compatible = "jedec,spi-nor";
  67                 reg = <0>;
  68                 spi-max-frequency = <10000000>;
  69
  70                 partitions {
  71                         compatible = "fixed-partitions";
  72                         #address-cells = <1>;
  73                         #size-cells = <1>;
  74
  75                         partition@0 {
  76                                 label = "u-boot";
  77                                 reg = <0x0 0x30000>;
  78                                 read-only;
  79                         };
  80
  81                         partition@30000 {
  82                                 label = "u-boot-env";
  83                                 reg = <0x30000 0x10000>;
  84                                 read-only;
  85                         };
  86
  87                         factory: partition@40000 {
  88                                 label = "factory";
  89                                 reg = <0x40000 0x10000>;
  90                                 read-only;
  91                         };
  92
  93                         partition@50000 {
  94                                 label = "firmware";
  95                                 reg = <0x50000 0xfb0000>;
  96                                 compatible = "denx,uimage";
  97                         };
  98                 };
  99         };
 100 };
 101
 102 &uart1 {
 103         status = "okay";
 104 };
 105
 106 &ehci {
 107         status = "okay";
 108 };
 109
 110 &ohci {
 111         status = "okay";
 112 };