target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts

   1 //SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc";
  11         model = "WIZnet WizFi630S";
  12
  13         chosen {
  14                 bootargs = "console=ttyS1,115200";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_run;
  19                 led-failsafe = &led_run;
  20                 led-running = &led_run;
  21                 led-upgrade = &led_run;
  22                 serial0 = &uart1;
  23                 serial1 = &uartlite;
  24         };
  25
  26         leds {
  27                 compatible = "gpio-leds";
  28
  29                 led_run: run {
  30                         label = "wizfi630s:green:run";
  31                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 ledwps {
  35                         label = "wizfi630s:green:wps";
  36                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 leduart1 {
  40                         label = "wizfi630s:green:uart1";
  41                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 leduart2 {
  45                         label = "wizfi630s:green:uart2";
  46                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  47                 };
  48         };
  49
  50         keys {
  51                 compatible = "gpio-keys";
  52
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  59                         linux,code = <KEY_RESTART>;
  60                 };
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  65                         linux,code = <KEY_WPS_BUTTON>;
  66                 };
  67
  68                 scm1 {
  69                         label = "SCM1";
  70                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  71                         linux,code = <BTN_1>;
  72                         linux,input-type = <EV_SW>;
  73                 };
  74
  75                 scm2 {
  76                         label = "SCM2";
  77                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  78                         linux,code = <BTN_2>;
  79                         linux,input-type = <EV_SW>;
  80                 };
  81         };
  82 };
  83
  84 &state_default {
  85         gpio {
  86                 groups = "gpio", "i2s", "i2c", "wdt", "refclk", "p1led_an", "p2led_an";
  87                 function = "gpio";
  88         };
  89 };
  90
  91 &spi0 {
  92         status = "okay";
  93
  94         pinctrl-names = "default";
  95         pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
  96
  97         flash@0 {
  98                 compatible = "jedec,spi-nor";
  99                 reg = <0>;
 100                 spi-max-frequency = <40000000>;
 101
 102                 partitions {
 103                         compatible = "fixed-partitions";
 104                         #address-cells = <1>;
 105                         #size-cells = <1>;
 106
 107                         partition@0 {
 108                                 label = "u-boot";
 109                                 reg = <0x0 0x30000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@30000 {
 114                                 label = "u-boot-env";
 115                                 reg = <0x30000 0x10000>;
 116                                 read-only;
 117                         };
 118
 119                         factory: partition@40000 {
 120                                 label = "factory";
 121                                 reg = <0x40000 0x10000>;
 122                                 read-only;
 123                         };
 124
 125                         partition@50000 {
 126                                 compatible = "denx,uimage";
 127                                 label = "firmware";
 128                                 reg = <0x50000 0x1fb0000>;
 129                         };
 130                 };
 131         };
 132 };
 133
 134 &uart1 {
 135         status = "okay";
 136 };
 137
 138 &uart2 {
 139         status = "okay";
 140 };
 141
 142 &pwm {
 143         status = "okay";
 144 };
 145
 146 &ethernet {
 147         mtd-mac-address = <&factory 0x2e>;
 148 };
 149
 150 &esw {
 151         mediatek,portmap = <0x3e>;
 152         mediatek,portdisable = <0x26>;
 153 };
 154
 155 &sdhci {
 156         status = "okay";
 157         mediatek,cd-high;
 158 };
 159
 160 &wmac {
 161         status = "okay";
 162 };