target/linux/ramips/dts/rt2880_airlink101_ar670w.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "airlink101,ar670w", "ralink,rt2880-soc";
  10         model = "Airlink101 AR670W";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         flash@bdc00000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0xbc400000 0x800000>;
  22                 bank-width = <2>;
  23
  24                 partitions {
  25                         compatible = "fixed-partitions";
  26                         #address-cells = <1>;
  27                         #size-cells = <1>;
  28
  29                         partition@0 {
  30                                 reg = <0x0 0x30000>;
  31                                 label = "u-boot";
  32                                 read-only;
  33                         };
  34
  35                         factory: partition@30000 {
  36                                 reg = <0x30000 0x10000>;
  37                                 label = "factory";
  38                                 read-only;
  39                         };
  40
  41                         partition@40000 {
  42                                 compatible = "lzma";
  43                                 reg = <0x40000 0x3c0000>;
  44                                 label = "firmware";
  45                         };
  46                 };
  47         };
  48
  49         leds {
  50                 compatible = "gpio-leds";
  51
  52                 led_power: power {
  53                         label = "ar670w:green:power";
  54                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 wpsblue {
  58                         label = "ar670w:blue:wps";
  59                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  60                 };
  61         };
  62
  63         keys {
  64                 compatible = "gpio-keys-polled";
  65                 poll-interval = <100>;
  66
  67                 wps {
  68                         label = "wps";
  69                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  70                         linux,code = <KEY_WPS_BUTTON>;
  71                 };
  72
  73                 reset {
  74                         label = "reset";
  75                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  76                         linux,code = <KEY_RESTART>;
  77                 };
  78         };
  79 };
  80
  81 &gpio0 {
  82         status = "okay";
  83 };
  84
  85 &state_default {
  86         gpio {
  87                 groups = "i2c", "spi", "uartlite";
  88                 function = "gpio";
  89         };
  90 };
  91
  92 &ethernet {
  93         status = "okay";
  94         mtd-mac-address = <&factory 0x2004>;
  95
  96         port@0 {
  97                 phy-handle = <&phy0>;
  98                 phy-mode = "mii";
  99         };
 100
 101         mdio-bus {
 102                 status = "okay";
 103
 104                 phy0: ethernet-phy@0 {
 105                         phy-mode = "mii";
 106                         reg = <0>;
 107                 };
 108         };
 109 };
 110
 111 &wmac {
 112         status = "okay";
 113         ralink,mtd-eeprom = <&factory 0x2000>;
 114 };