target/linux/ramips/dts/rt2880_dlink_dap-1522-a1.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dap-1522-a1", "ralink,rt2880-soc";
  10         model = "D-Link DAP-1522 A1";
  11
  12         aliases {
  13                 led-boot = &led_status;
  14                 led-failsafe = &led_status;
  15                 led-running = &led_status;
  16                 led-upgrade = &led_status;
  17         };
  18
  19         flash@bc400000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0xbc400000 0x800000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "uboot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         factory: partition@30000 {
  37                                 label = "factory";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         partition@40000 {
  43                                 compatible = "wrg";
  44                                 label = "firmware";
  45                                 reg = <0x40000 0x3a0000>;
  46                         };
  47                 };
  48         };
  49
  50         rtl8366s {
  51                 compatible = "realtek,rtl8366s";
  52                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  53                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  54         };
  55
  56         keys {
  57                 compatible = "gpio-keys-polled";
  58                 poll-interval = <100>;
  59
  60                 reset {
  61                         label = "reset";
  62                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  63                         linux,code = <KEY_RESTART>;
  64                 };
  65
  66                 wps {
  67                         label = "wps";
  68                         gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
  69                         linux,code = <KEY_WPS_BUTTON>;
  70                 };
  71
  72                 ap {
  73                         label = "ap";
  74                         gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
  75                         linux,code = <BTN_0>;
  76                         linux,input-type = <EV_SW>;
  77                 };
  78
  79                 bridge {
  80                         label = "bridge";
  81                         gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
  82                         linux,code = <BTN_1>;
  83                         linux,input-type = <EV_SW>;
  84                 };
  85         };
  86
  87         leds {
  88                 compatible = "gpio-leds";
  89
  90                 wps {
  91                         label = "dap-1522-a1:blue:wps";
  92                         gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
  93                 };
  94
  95                 ap {
  96                         label = "dap-1522-a1:blue:ap";
  97                         gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
  98                 };
  99
 100                 sta {
 101                         label = "dap-1522-a1:red:sta";
 102                         gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
 103                 };
 104
 105                 led_status: status {
 106                         label = "dap-1522-a1:blue:status";
 107                         gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
 108                 };
 109         };
 110 };
 111
 112 &gpio0 {
 113         status = "okay";
 114 };
 115
 116 &gpio2 {
 117         status = "okay";
 118 };
 119
 120 &state_default {
 121         gpio {
 122                 groups = "i2c", "uartlite", "pci";
 123                 function = "gpio";
 124         };
 125 };
 126
 127 &ethernet {
 128         status = "okay";
 129         mtd-mac-address = <&factory 0x2004>;
 130
 131         port@0 {
 132                 mediatek,fixed-link = <1000 1 1 1>;
 133         };
 134
 135         mdio-bus {
 136                 status = "okay";
 137
 138                 phy0: ethernet-phy@0 {
 139                         phy-mode = "mii";
 140                         reg = <0>;
 141                 };
 142         };
 143 };
 144
 145 &wmac {
 146         ralink,mtd-eeprom = <&factory 0x2000>;
 147 };