target/linux/ramips/dts/rt2880_ralink_v11st-fe.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "ralink,v11st-fe", "ralink,rt2880-soc";
  10         model = "Ralink V11ST-FE";
  11
  12         aliases {
  13                 led-boot = &led_status;
  14                 led-failsafe = &led_status;
  15                 led-running = &led_status;
  16                 led-upgrade = &led_status;
  17         };
  18
  19         flash@1c000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1c000000 0x800000>;
  22                 bank-width = <2>;
  23
  24                 partitions {
  25                         compatible = "fixed-partitions";
  26                         #address-cells = <1>;
  27                         #size-cells = <1>;
  28
  29                         partition@0 {
  30                                 reg = <0x0 0x0030000>;
  31                                 label = "u-boot";
  32                                 read-only;
  33                         };
  34
  35                         partition@30000 {
  36                                 reg = <0x00030000 0x00010000>;
  37                                 label = "u-boot-env";
  38                                 read-only;
  39                         };
  40
  41                         factory: partition@40000 {
  42                                 reg = <0x00040000 0x00010000>;
  43                                 label = "factory";
  44                                 read-only;
  45                         };
  46
  47                         partition@50000 {
  48                                 compatible = "denx,uimage";
  49                                 reg = <0x00050000 0x003b0000>;
  50                                 label = "firmware";
  51                         };
  52                 };
  53         };
  54
  55         keys {
  56                 compatible = "gpio-keys-polled";
  57                 poll-interval = <100>;
  58
  59                 wps {
  60                         label = "wps";
  61                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
  62                         linux,code = <KEY_WPS_BUTTON>;
  63                 };
  64         };
  65
  66         leds {
  67                 compatible = "gpio-leds";
  68
  69                 led_status: status {
  70                         label = "v11st-fe:green:status";
  71                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  72                 };
  73         };
  74 };
  75
  76 &gpio0 {
  77         status = "okay";
  78 };
  79
  80 &ethernet {
  81         status = "okay";
  82 };
  83
  84 &pci {
  85         status = "okay";
  86 };
  87
  88 &wmac {
  89         ralink,mtd-eeprom = <&factory 0x0>;
  90 };