target/linux/ramips/dts/rt3050_dlink_dcs-930.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "dlink,dcs-930", "ralink,rt3050-soc";
   8         model = "D-Link DCS-930";
   9
  10         aliases {
  11                 led-boot = &led_status;
  12                 led-failsafe = &led_status;
  13                 led-running = &led_status;
  14                 led-upgrade = &led_status;
  15         };
  16
  17         flash@1f000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1f000000 0x400000>;
  20                 bank-width = <2>;
  21                 device-width = <2>;
  22
  23                 partitions {
  24                         compatible = "fixed-partitions";
  25                         #address-cells = <1>;
  26                         #size-cells = <1>;
  27
  28                         partition@0 {
  29                                 label = "u-boot";
  30                                 reg = <0x0 0x30000>;
  31                                 read-only;
  32                         };
  33
  34                         partition@30000 {
  35                                 label = "u-boot-env";
  36                                 reg = <0x30000 0x10000>;
  37                                 read-only;
  38                         };
  39
  40                         factory: partition@40000 {
  41                                 label = "factory";
  42                                 reg = <0x40000 0x10000>;
  43                                 read-only;
  44                         };
  45
  46                         partition@50000 {
  47                                 compatible = "denx,uimage";
  48                                 label = "firmware";
  49                                 reg = <0x50000 0x3b0000>;
  50                         };
  51                 };
  52         };
  53
  54         leds {
  55                 compatible = "gpio-leds";
  56
  57                 wifi {
  58                         label = "red:alert";
  59                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 led_status: status {
  63                         label = "green:status";
  64                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 wps {
  68                         label = "blue:wps";
  69                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  70                 };
  71         };
  72
  73         keys {
  74                 compatible = "gpio-keys-polled";
  75                 poll-interval = <20>;
  76
  77                 wps {
  78                         label = "wps";
  79                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  80                         linux,code = <BTN_1>;
  81                 };
  82
  83                 reset {
  84                         label = "reset";
  85                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_RESTART>;
  87                 };
  88         };
  89 };
  90
  91 &state_default {
  92         gpio {
  93                 groups = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  94                 function = "gpio";
  95         };
  96 };
  97
  98 &ethernet {
  99         nvmem-cells = <&macaddr_factory_4>;
 100         nvmem-cell-names = "mac-address";
 101 };
 102
 103 &esw {
 104         mediatek,portmap = <0x2f>;
 105 };
 106
 107 &wmac {
 108         ralink,mtd-eeprom = <&factory 0x0>;
 109 };
 110
 111 &otg {
 112         status = "okay";
 113 };
 114
 115 &factory {
 116         compatible = "nvmem-cells";
 117         #address-cells = <1>;
 118         #size-cells = <1>;
 119
 120         macaddr_factory_4: macaddr@4 {
 121                 reg = <0x4 0x6>;
 122         };
 123 };