target/linux/ramips/dts/rt3052_jcg_jhr-n825r.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "jcg,jhr-n825r", "ralink,rt3052-soc";
   8         model = "JCG JHR-N825R";
   9
  10         aliases {
  11                 led-boot = &led_system;
  12                 led-failsafe = &led_system;
  13                 led-running = &led_system;
  14                 led-upgrade = &led_system;
  15         };
  16
  17         flash@1f000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1f000000 0x800000>;
  20                 bank-width = <2>;
  21                 device-width = <2>;
  22
  23                 partitions {
  24                         compatible = "fixed-partitions";
  25                         #address-cells = <1>;
  26                         #size-cells = <1>;
  27
  28                         partition@0 {
  29                                 label = "u-boot";
  30                                 reg = <0x0 0x30000>;
  31                                 read-only;
  32                         };
  33
  34                         partition@30000 {
  35                                 label = "u-boot-env";
  36                                 reg = <0x30000 0x10000>;
  37                                 read-only;
  38                         };
  39
  40                         factory: partition@40000 {
  41                                 label = "factory";
  42                                 reg = <0x40000 0x10000>;
  43                                 read-only;
  44                         };
  45
  46                         partition@50000 {
  47                                 compatible = "denx,uimage";
  48                                 label = "firmware";
  49                                 reg = <0x50000 0x3b0000>;
  50                         };
  51                 };
  52         };
  53
  54         leds {
  55                 compatible = "gpio-leds";
  56                 led_system: system {
  57                         label = "red:power";
  58                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  59                 };
  60         };
  61
  62         keys {
  63                 compatible = "gpio-keys-polled";
  64                 poll-interval = <20>;
  65                 reset_wps {
  66                         label = "reset_wps";
  67                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_RESTART>;
  69                 };
  70         };
  71 };
  72
  73 &state_default {
  74         gpio {
  75                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  76                 function = "gpio";
  77         };
  78 };
  79
  80 &ethernet {
  81         mtd-mac-address = <&factory 0x2e>;
  82 };
  83
  84 &esw {
  85         mediatek,portmap = <0x3e>;
  86 };
  87
  88 &wmac {
  89         ralink,mtd-eeprom = <&factory 0x0>;
  90 };