target/linux/ramips/dts/rt3052_mofinetwork_mofi3500-3gn.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "mofinetwork,mofi3500-3gn", "ralink,rt3052-soc";
   8         model = "MoFi Network MOFI3500-3GN";
   9
  10         aliases {
  11                 led-boot = &led_status;
  12                 led-failsafe = &led_status;
  13                 led-running = &led_status;
  14                 led-upgrade = &led_status;
  15         };
  16
  17         flash@1f000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1f000000 0x800000>;
  20                 bank-width = <2>;
  21                 device-width = <2>;
  22
  23                 partitions {
  24                         compatible = "fixed-partitions";
  25                         #address-cells = <1>;
  26                         #size-cells = <1>;
  27
  28                         partition@0 {
  29                                 label = "u-boot";
  30                                 reg = <0x0 0x30000>;
  31                                 read-only;
  32                         };
  33
  34                         partition@30000 {
  35                                 label = "u-boot-env";
  36                                 reg = <0x30000 0x10000>;
  37                                 read-only;
  38                         };
  39
  40                         factory: partition@40000 {
  41                                 label = "factory";
  42                                 reg = <0x40000 0x10000>;
  43                                 read-only;
  44                         };
  45
  46                         partition@50000 {
  47                                 compatible = "denx,uimage";
  48                                 label = "firmware";
  49                                 reg = <0x50000 0x7b0000>;
  50                         };
  51                 };
  52         };
  53
  54         leds {
  55                 compatible = "gpio-leds";
  56
  57                 usb {
  58                         label = "green:usb";
  59                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  60                         trigger-sources = <&otg_port1>;
  61                         linux,default-trigger = "usbport";
  62                 };
  63
  64                 3g {
  65                         label = "green:3g";
  66                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 led_status: status {
  70                         label = "green:status";
  71                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 wps {
  75                         label = "green:wps";
  76                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  77                 };
  78         };
  79
  80         keys {
  81                 compatible = "gpio-keys-polled";
  82                 poll-interval = <20>;
  83
  84                 reset {
  85                         label = "reset";
  86                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  87                         linux,code = <KEY_RESTART>;
  88                 };
  89
  90                 connect {
  91                         label = "connect";
  92                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_CONNECT>;
  94                 };
  95
  96                 wps {
  97                         label = "wps";
  98                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  99                         linux,code = <KEY_WPS_BUTTON>;
 100                 };
 101         };
 102 };
 103
 104 &state_default {
 105         gpio {
 106                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 107                 function = "gpio";
 108         };
 109 };
 110
 111 &esw {
 112         mediatek,portmap = <0x2f>;
 113 };
 114
 115 &wmac {
 116         status = "okay";
 117         ralink,mtd-eeprom = <&factory 0x0>;
 118 };
 119
 120 &otg {
 121         status = "okay";
 122 };