target/linux/ramips/dts/rt5350_intenso_memory2move.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "intenso,memory2move", "ralink,rt5350-soc";
  10         model = "Intenso Memory 2 Move";
  11
  12         aliases {
  13                 led-boot = &led_wifi;
  14                 led-failsafe = &led_wifi;
  15                 led-running = &led_wifi;
  16                 led-upgrade = &led_wifi;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_wifi: wifi {
  27                         label = "memory2move:blue:wifi";
  28                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 wan {
  32                         label = "memory2move:green:wan";
  33                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  34                 };
  35         };
  36
  37         keys {
  38                 compatible = "gpio-keys-polled";
  39                 poll-interval = <20>;
  40
  41                 power {
  42                         label = "power";
  43                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_POWER>;
  45                 };
  46
  47                 reset {
  48                         label = "reset";
  49                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_RESTART>;
  51                 };
  52         };
  53 };
  54
  55 &spi0 {
  56         status = "okay";
  57
  58         flash@0 {
  59                 compatible = "jedec,spi-nor";
  60                 reg = <0>;
  61                 spi-max-frequency = <10000000>;
  62
  63                 partitions {
  64                         compatible = "fixed-partitions";
  65                         #address-cells = <1>;
  66                         #size-cells = <1>;
  67
  68                         partition@0 {
  69                                 label = "Bootloader";
  70                                 reg = <0x0 0x30000>;
  71                                 read-only;
  72                         };
  73
  74                         partition@30000 {
  75                                 label = "Config";
  76                                 reg = <0x30000 0x10000>;
  77                                 read-only;
  78                         };
  79
  80                         factory: partition@40000 {
  81                                 label = "factory";
  82                                 reg = <0x40000 0x10000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@50000 {
  87                                 compatible = "denx,uimage";
  88                                 label = "firmware";
  89                                 reg = <0x50000 0x7b0000>;
  90                         };
  91                 };
  92         };
  93 };
  94
  95 &state_default {
  96         gpio {
  97                 groups = "i2c", "uartf";
  98                 function = "gpio";
  99         };
 100 };
 101
 102 &ethernet {
 103         mtd-mac-address = <&factory 0x28>;
 104 };
 105
 106 &esw {
 107         mediatek,portmap = <0x2f>;
 108 };
 109
 110 &ehci {
 111         status = "okay";
 112 };
 113
 114 &ohci {
 115         status = "okay";
 116 };
 117
 118 &wmac {
 119         ralink,mtd-eeprom = <&factory 0x0>;
 120 };