target/linux/ramips/dts/rt5350_poray_x5.dts

   1 #include "rt5350.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "poray,x5", "ralink,rt5350-soc";
   8         model = "Poray X5";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_power: power {
  21                         label = "green:power";
  22                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 20 {
  26                         label = "green:20";
  27                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 50 {
  31                         label = "green:50";
  32                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 80 {
  36                         label = "green:80";
  37                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  38                 };
  39         };
  40
  41         keys {
  42                 compatible = "gpio-keys-polled";
  43                 poll-interval = <20>;
  44
  45                 bat {
  46                         label = "bat";
  47                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_WPS_BUTTON>;
  49                 };
  50
  51                 reset {
  52                         label = "reset";
  53                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  54                         linux,code = <KEY_RESTART>;
  55                 };
  56
  57                 mode {
  58                         label = "mode";
  59                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  60                         linux,code = <BTN_0>;
  61                         linux,input-type = <EV_SW>;
  62                 };
  63         };
  64
  65         gpio_export {
  66                 compatible = "gpio-export";
  67                 #size-cells = <0>;
  68
  69                 usb-mode {
  70                         gpio-export,name = "usb-mode";
  71                         gpio-export,output = <0>;
  72                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  73                 };
  74         };
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         flash@0 {
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 spi-max-frequency = <10000000>;
  84
  85                 partitions {
  86                         compatible = "fixed-partitions";
  87                         #address-cells = <1>;
  88                         #size-cells = <1>;
  89
  90                         partition@0 {
  91                                 label = "u-boot";
  92                                 reg = <0x0 0x30000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@30000 {
  97                                 label = "u-boot-env";
  98                                 reg = <0x30000 0x10000>;
  99                                 read-only;
 100                         };
 101
 102                         factory: partition@40000 {
 103                                 label = "factory";
 104                                 reg = <0x40000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@50000 {
 109                                 compatible = "denx,uimage";
 110                                 label = "firmware";
 111                                 reg = <0x50000 0x7b0000>;
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &state_default {
 118         gpio {
 119                 groups = "i2c", "jtag", "uartf";
 120                 function = "gpio";
 121         };
 122 };
 123
 124 &ethernet {
 125         mtd-mac-address = <&factory 0x4>;
 126 };
 127
 128 &esw {
 129         mediatek,portmap = <0x2f>;
 130         mediatek,led_polarity = <1>;
 131 };
 132
 133 &wmac {
 134         ralink,mtd-eeprom = <&factory 0x0>;
 135         ralink,led-polarity = <1>;
 136 };