target/linux/ramips/dts/rt5350_poray_x8.dts

   1 #include "rt5350.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "poray,x8", "ralink,rt5350-soc";
   8         model = "Poray X8";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_power: power {
  21                         label = "green:power";
  22                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys-polled";
  28                 poll-interval = <20>;
  29
  30                 reset {
  31                         label = "reset";
  32                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_RESTART>;
  34                 };
  35         };
  36 };
  37
  38 &spi0 {
  39         status = "okay";
  40
  41         flash@0 {
  42                 compatible = "jedec,spi-nor";
  43                 reg = <0>;
  44                 spi-max-frequency = <10000000>;
  45
  46                 partitions {
  47                         compatible = "fixed-partitions";
  48                         #address-cells = <1>;
  49                         #size-cells = <1>;
  50
  51                         partition@0 {
  52                                 label = "u-boot";
  53                                 reg = <0x0 0x30000>;
  54                                 read-only;
  55                         };
  56
  57                         partition@30000 {
  58                                 label = "u-boot-env";
  59                                 reg = <0x30000 0x10000>;
  60                                 read-only;
  61                         };
  62
  63                         factory: partition@40000 {
  64                                 label = "factory";
  65                                 reg = <0x40000 0x10000>;
  66                                 read-only;
  67                         };
  68
  69                         partition@50000 {
  70                                 compatible = "denx,uimage";
  71                                 label = "firmware";
  72                                 reg = <0x50000 0x7b0000>;
  73                         };
  74                 };
  75         };
  76 };
  77
  78 &state_default {
  79         gpio {
  80                 groups = "i2c", "jtag", "uartf";
  81                 function = "gpio";
  82         };
  83 };
  84
  85 &ethernet {
  86         mtd-mac-address = <&factory 0x4>;
  87 };
  88
  89 &esw {
  90         mediatek,portmap = <0x2f>;
  91         mediatek,led_polarity = <1>;
  92 };
  93
  94 &wmac {
  95         ralink,mtd-eeprom = <&factory 0x0>;
  96         ralink,led-polarity = <1>;
  97 };