target/linux/ramips/dts/rt5350_unbranded_a5-v11.dts

   1 #include "rt5350.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "unbranded,a5-v11", "ralink,rt5350-soc";
   8         model = "A5-V11";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15                 label-mac-device = &ethernet;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 system {
  22                         label = "blue:system";
  23                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  24                 };
  25
  26                 led_power: power {
  27                         label = "red:power";
  28                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  29                 };
  30         };
  31
  32         keys {
  33                 compatible = "gpio-keys-polled";
  34                 poll-interval = <20>;
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_RESTART>;
  40                 };
  41         };
  42
  43         gpio_export {
  44                 compatible = "gpio-export";
  45                 #size-cells = <0>;
  46
  47                 usb {
  48                         gpio-export,name = "usb";
  49                         gpio-export,output = <1>;
  50                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  51                 };
  52
  53                 root_hub {
  54                         gpio-export,name = "root_hub";
  55                         gpio-export,output = <1>;
  56                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  57                 };
  58         };
  59 };
  60
  61 &spi0 {
  62         status = "okay";
  63
  64         flash@0 {
  65                 compatible = "jedec,spi-nor";
  66                 reg = <0>;
  67                 spi-max-frequency = <10000000>;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         partition@0 {
  75                                 label = "u-boot";
  76                                 reg = <0x0 0x30000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@30000 {
  81                                 label = "u-boot-env";
  82                                 reg = <0x30000 0x10000>;
  83                                 read-only;
  84                         };
  85
  86                         factory: partition@40000 {
  87                                 label = "factory";
  88                                 reg = <0x40000 0x10000>;
  89                                 read-only;
  90                         };
  91
  92                         partition@50000 {
  93                                 compatible = "denx,uimage";
  94                                 label = "firmware";
  95                                 reg = <0x50000 0x3b0000>;
  96                         };
  97                 };
  98         };
  99 };
 100
 101 &gpio1 {
 102         status = "okay";
 103 };
 104
 105 &state_default {
 106         gpio {
 107                 groups = "i2c", "jtag", "uartf", "led";
 108                 function = "gpio";
 109         };
 110 };
 111
 112 &ethernet {
 113         mtd-mac-address = <&factory 0x4>;
 114 };
 115
 116 &esw {
 117         mediatek,portmap = <0x1>;
 118         mediatek,portdisable = <0x3e>;
 119 };
 120
 121 &wmac {
 122         ralink,mtd-eeprom = <&factory 0x0>;
 123 };