target/linux/ramips/dts/rt5350_wiznet_wizfi630a.dts

   1 #include "rt5350.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
   8         model = "WIZnet WizFi630A";
   9
  10         aliases {
  11                 led-boot = &led_run;
  12                 led-failsafe = &led_run;
  13                 led-running = &led_run;
  14                 led-upgrade = &led_run;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS1,115200";
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 led_run: run {
  25                         label = ":run";
  26                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 wps {
  30                         label = ":wps";
  31                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 uart1 {
  35                         label = ":uart1";
  36                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 uart2 {
  40                         label = ":uart2";
  41                         gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         keys {
  46                 compatible = "gpio-keys-polled";
  47                 poll-interval = <20>;
  48
  49                 reset {
  50                         label = "reset";
  51                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  52                         linux,code = <KEY_RESTART>;
  53                 };
  54
  55                 wps {
  56                         label = "wps";
  57                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  58                         linux,code = <KEY_WPS_BUTTON>;
  59                 };
  60
  61                 scm1 {
  62                         label = "SCM1";
  63                         gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
  64                         linux,code = <BTN_0>;
  65                 };
  66
  67                 scm2 {
  68                         label = "SCM2";
  69                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  70                         linux,code = <BTN_1>;
  71                 };
  72         };
  73 };
  74
  75 &spi0 {
  76         status = "okay";
  77
  78         flash@0 {
  79                 compatible = "jedec,spi-nor";
  80                 reg = <0>;
  81                 spi-max-frequency = <10000000>;
  82
  83                 partitions {
  84                         compatible = "fixed-partitions";
  85                         #address-cells = <1>;
  86                         #size-cells = <1>;
  87
  88                         partition@0 {
  89                                 #size-cells = <1>;
  90                                 label = "uboot";
  91                                 reg = <0x0 0x30000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@30000 {
  96                                 #size-cells = <1>;
  97                                 label = "uboot-env";
  98                                 reg = <0x30000 0x10000>;
  99                                 read-only;
 100                         };
 101
 102                         factory: partition@40000 {
 103                                 #size-cells = <1>;
 104                                 label = "factory";
 105                                 reg = <0x40000 0x10000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@50000 {
 110                                 compatible = "denx,uimage";
 111                                 #size-cells = <1>;
 112                                 label = "firmware";
 113                                 reg = <0x50000 0xfb0000>;
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &uart {
 120         status = "okay";
 121         pinctrl-names = "default";
 122         pinctrl-0 = <&uartf_pins>;
 123 };
 124
 125 &state_default {
 126         gpio {
 127                 groups = "i2c", "jtag" ;
 128                 function = "gpio";
 129         };
 130 };
 131
 132 &ethernet {
 133         nvmem-cells = <&macaddr_factory_4>;
 134         nvmem-cell-names = "mac-address";
 135 };
 136
 137 &esw {
 138         mediatek,portmap = <0x17>;
 139 };
 140
 141 &wmac {
 142         ralink,mtd-eeprom = <&factory 0x0>;
 143 };
 144
 145 &factory {
 146         compatible = "nvmem-cells";
 147         #address-cells = <1>;
 148         #size-cells = <1>;
 149
 150         macaddr_factory_4: macaddr@4 {
 151                 reg = <0x4 0x6>;
 152         };
 153 };