target/linux/sunxi/patches-3.14/300-2-dt-sun7i-add-pcduino3-dts.patch

   1 diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapi.dts new/arch/arm/boot/dts/sun7i-a20-bananapi.dts
   2 diff -ruN old/arch/arm/boot/dts/sun7i-a20-cubietruck.dts new/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
   3 diff -ruN old/arch/arm/boot/dts/sun7i-a20-pcduino3.dts new/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
   4 --- old/arch/arm/boot/dts/sun7i-a20-pcduino3.dts        1970-01-01 01:00:00.000000000 +0100
   5 +++ new/arch/arm/boot/dts/sun7i-a20-pcduino3.dts        2014-10-23 15:44:48.000000000 +0200
   6 @@ -0,0 +1,153 @@
   7 +/*
   8 + * Copyright 2014 Zoltan HERPAI
   9 + * Zoltan HERPAI <wigyori@uid0.hu>
  10 + *
  11 + * The code contained herein is licensed under the GNU General Public
  12 + * License. You may obtain a copy of the GNU General Public License
  13 + * Version 2 or later at the following locations:
  14 + *
  15 + * http://www.opensource.org/licenses/gpl-license.html
  16 + * http://www.gnu.org/copyleft/gpl.html
  17 + */
  18 +
  19 +/dts-v1/;
  20 +/include/ "sun7i-a20.dtsi"
  21 +/include/ "sunxi-ahci-reg.dtsi"
  22 +/include/ "sun4i-a10-usb-vbus-reg.dtsi"
  23 +#include <dt-bindings/input/input.h>
  24 +
  25 +/ {
  26 +       model = "LinkSprite pcDuino V3";
  27 +       compatible = "linksprite,a20-pcduino", "allwinner,sun7i-a20";
  28 +
  29 +       aliases {
  30 +               spi0 = &spi1;
  31 +               spi1 = &spi2;
  32 +       };
  33 +
  34 +       soc@01c00000 {
  35 +               spi1: spi@01c06000 {
  36 +                       pinctrl-names = "default";
  37 +                       pinctrl-0 = <&spi1_pins_a>;
  38 +                       status = "okay";
  39 +               };
  40 +
  41 +               spi2: spi@01c17000 {
  42 +                       pinctrl-names = "default";
  43 +                       pinctrl-0 = <&spi2_pins_a>;
  44 +                       status = "okay";
  45 +               };
  46 +
  47 +               mmc0: mmc@01c0f000 {
  48 +                       pinctrl-names = "default", "default";
  49 +                       pinctrl-0 = <&mmc0_pins_a>;
  50 +                       pinctrl-1 = <&mmc0_cd_pin_reference_design>;
  51 +                       cd-gpios = <&pio 7 1 0>; /* PH1 */
  52 +                       status = "okay";
  53 +               };
  54 +
  55 +               usbphy: phy@01c13400 {
  56 +                       usb1_vbus-supply = <&reg_usb1_vbus>;
  57 +                       usb2_vbus-supply = <&reg_usb2_vbus>;
  58 +                       status = "okay";
  59 +               };
  60 +
  61 +               ehci0: usb@01c14000 {
  62 +                       status = "okay";
  63 +               };
  64 +
  65 +               ohci0: usb@01c14400 {
  66 +                       status = "okay";
  67 +               };
  68 +
  69 +               ahci: sata@01c18000 {
  70 +                       target-supply = <&reg_ahci_5v>;
  71 +                       status = "okay";
  72 +               };
  73 +
  74 +               ehci1: usb@01c1c000 {
  75 +                       status = "okay";
  76 +               };
  77 +
  78 +               ohci1: usb@01c1c400 {
  79 +                       status = "okay";
  80 +               };
  81 +
  82 +               pinctrl@01c20800 {
  83 +                       led_pins_pcduino3: led_pins@0 {
  84 +                               allwinner,pins = "PH2";
  85 +                               allwinner,function = "gpio_out";
  86 +                               allwinner,drive = <1>;
  87 +                               allwinner,pull = <0>;
  88 +                       };
  89 +               };
  90 +
  91 +               lradc: lradc@01c22800 {
  92 +                       allwinner,chan0-step = <200>;
  93 +                       linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
  94 +                                               KEY_MENU KEY_SEARCH KEY_HOME
  95 +                                               KEY_ESC KEY_ENTER>;
  96 +                       status = "okay";
  97 +               };
  98 +
  99 +               uart0: serial@01c28000 {
 100 +                       pinctrl-names = "default";
 101 +                       pinctrl-0 = <&uart0_pins_a>;
 102 +                       status = "okay";
 103 +               };
 104 +
 105 +               uart6: serial@01c29800 {
 106 +                       pinctrl-names = "default";
 107 +                       pinctrl-0 = <&uart6_pins_a>;
 108 +                       status = "okay";
 109 +               };
 110 +
 111 +               uart7: serial@01c29c00 {
 112 +                       pinctrl-names = "default";
 113 +                       pinctrl-0 = <&uart7_pins_a>;
 114 +                       status = "okay";
 115 +               };
 116 +
 117 +               i2c0: i2c@01c2ac00 {
 118 +                       pinctrl-names = "default";
 119 +                       pinctrl-0 = <&i2c0_pins_a>;
 120 +                       status = "okay";
 121 +               };
 122 +
 123 +               i2c1: i2c@01c2b000 {
 124 +                       pinctrl-names = "default";
 125 +                       pinctrl-0 = <&i2c1_pins_a>;
 126 +                       status = "okay";
 127 +               };
 128 +
 129 +               i2c2: i2c@01c2b400 {
 130 +                       pinctrl-names = "default";
 131 +                       pinctrl-0 = <&i2c2_pins_a>;
 132 +                       status = "okay";
 133 +               };
 134 +
 135 +               gmac: ethernet@01c50000 {
 136 +                       pinctrl-names = "default";
 137 +                       pinctrl-0 = <&gmac_pins_mii_a>;
 138 +                       phy = <&phy1>;
 139 +                       phy-mode = "mii";
 140 +                       status = "okay";
 141 +
 142 +                       phy1: ethernet-phy@1 {
 143 +                               reg = <1>;
 144 +                       };
 145 +               };
 146 +       };
 147 +
 148 +       leds {
 149 +               compatible = "gpio-leds";
 150 +               pinctrl-names = "default";
 151 +               pinctrl-0 = <&led_pins_pcduino3>;
 152 +
 153 +               green {
 154 +                       label = "a20-pcduino:green:usr";
 155 +                       gpios = <&pio 7 2 0>;
 156 +                       default-state = "on";
 157 +               };
 158 +       };
 159 +};