target/linux/sunxi/patches-3.14/302-2-dt-sun7i-add-bananapi-dts.patch

   1 diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapi.dts new/arch/arm/boot/dts/sun7i-a20-bananapi.dts
   2 --- old/arch/arm/boot/dts/sun7i-a20-bananapi.dts        1970-01-01 01:00:00.000000000 +0100
   3 +++ new/arch/arm/boot/dts/sun7i-a20-bananapi.dts        2014-10-23 15:44:48.000000000 +0200
   4 @@ -0,0 +1,160 @@
   5 +/*
   6 + * Copyright 2014 Zoltan HERPAI
   7 + * Zoltan HERPAI <wigyori@uid0.hu>
   8 + *
   9 + * The code contained herein is licensed under the GNU General Public
  10 + * License. You may obtain a copy of the GNU General Public License
  11 + * Version 2 or later at the following locations:
  12 + *
  13 + * http://www.opensource.org/licenses/gpl-license.html
  14 + * http://www.gnu.org/copyleft/gpl.html
  15 + */
  16 +
  17 +/dts-v1/;
  18 +/include/ "sun7i-a20.dtsi"
  19 +/include/ "sunxi-ahci-reg.dtsi"
  20 +/include/ "sun4i-a10-usb-vbus-reg.dtsi"
  21 +#include <dt-bindings/input/input.h>
  22 +
  23 +/ {
  24 +       model = "Lemaker bananaPi";
  25 +       compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
  26 +
  27 +       aliases {
  28 +               spi0 = &spi1;
  29 +               spi1 = &spi2;
  30 +       };
  31 +
  32 +       soc@01c00000 {
  33 +               spi1: spi@01c06000 {
  34 +                       pinctrl-names = "default";
  35 +                       pinctrl-0 = <&spi1_pins_a>;
  36 +                       status = "okay";
  37 +               };
  38 +
  39 +               spi2: spi@01c17000 {
  40 +                       pinctrl-names = "default";
  41 +                       pinctrl-0 = <&spi2_pins_a>;
  42 +                       status = "okay";
  43 +               };
  44 +
  45 +               mmc0: mmc@01c0f000 {
  46 +                       pinctrl-names = "default", "default";
  47 +                       pinctrl-0 = <&mmc0_pins_a>;
  48 +                       pinctrl-1 = <&mmc0_cd_pin_bananapi>;
  49 +                       cd-gpios = <&pio 7 10 0>; /* PH10 */
  50 +                       status = "okay";
  51 +               };
  52 +
  53 +               usbphy: phy@01c13400 {
  54 +                       usb1_vbus-supply = <&reg_usb1_vbus>;
  55 +                       usb2_vbus-supply = <&reg_usb2_vbus>;
  56 +                       status = "okay";
  57 +               };
  58 +
  59 +               ehci0: usb@01c14000 {
  60 +                       status = "okay";
  61 +               };
  62 +
  63 +               ohci0: usb@01c14400 {
  64 +                       status = "okay";
  65 +               };
  66 +
  67 +               ahci: sata@01c18000 {
  68 +                       target-supply = <&reg_ahci_5v>;
  69 +                       status = "okay";
  70 +               };
  71 +
  72 +               ehci1: usb@01c1c000 {
  73 +                       status = "okay";
  74 +               };
  75 +
  76 +               ohci1: usb@01c1c400 {
  77 +                       status = "okay";
  78 +               };
  79 +
  80 +               pinctrl@01c20800 {
  81 +                       led_pins_bananapi: led_pins@0 {
  82 +                               allwinner,pins = "PH2";
  83 +                               allwinner,function = "gpio_out";
  84 +                               allwinner,drive = <1>;
  85 +                               allwinner,pull = <0>;
  86 +                       };
  87 +
  88 +                       mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
  89 +                               allwinner,pins = "PH10";
  90 +                               allwinner,function = "gpio_in";
  91 +                               allwinner,drive = <0>;
  92 +                               allwinner,pull = <1>;
  93 +                       };
  94 +               };
  95 +
  96 +               lradc: lradc@01c22800 {
  97 +                       allwinner,chan0-step = <200>;
  98 +                       linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
  99 +                                               KEY_MENU KEY_SEARCH KEY_HOME
 100 +                                               KEY_ESC KEY_ENTER>;
 101 +                       status = "okay";
 102 +               };
 103 +
 104 +               uart0: serial@01c28000 {
 105 +                       pinctrl-names = "default";
 106 +                       pinctrl-0 = <&uart0_pins_a>;
 107 +                       status = "okay";
 108 +               };
 109 +
 110 +               uart6: serial@01c29800 {
 111 +                       pinctrl-names = "default";
 112 +                       pinctrl-0 = <&uart6_pins_a>;
 113 +                       status = "okay";
 114 +               };
 115 +
 116 +               uart7: serial@01c29c00 {
 117 +                       pinctrl-names = "default";
 118 +                       pinctrl-0 = <&uart7_pins_a>;
 119 +                       status = "okay";
 120 +               };
 121 +
 122 +               i2c0: i2c@01c2ac00 {
 123 +                       pinctrl-names = "default";
 124 +                       pinctrl-0 = <&i2c0_pins_a>;
 125 +                       status = "okay";
 126 +               };
 127 +
 128 +               i2c1: i2c@01c2b000 {
 129 +                       pinctrl-names = "default";
 130 +                       pinctrl-0 = <&i2c1_pins_a>;
 131 +                       status = "okay";
 132 +               };
 133 +
 134 +               i2c2: i2c@01c2b400 {
 135 +                       pinctrl-names = "default";
 136 +                       pinctrl-0 = <&i2c2_pins_a>;
 137 +                       status = "okay";
 138 +               };
 139 +
 140 +               gmac: ethernet@01c50000 {
 141 +                       pinctrl-names = "default";
 142 +                       pinctrl-0 = <&gmac_pins_mii_a>;
 143 +                       phy = <&phy1>;
 144 +                       phy-mode = "mii";
 145 +                       status = "okay";
 146 +
 147 +                       phy1: ethernet-phy@1 {
 148 +                               reg = <1>;
 149 +                       };
 150 +               };
 151 +       };
 152 +
 153 +       leds {
 154 +               compatible = "gpio-leds";
 155 +               pinctrl-names = "default";
 156 +               pinctrl-0 = <&led_pins_bananapi>;
 157 +
 158 +               green {
 159 +                       label = "bananapi:green:usr";
 160 +                       gpios = <&pio 7 2 0>;
 161 +                       default-state = "on";
 162 +               };
 163 +       };
 164 +};
 165 diff -ruN old/arch/arm/boot/dts/sun7i-a20-cubietruck.dts new/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
 166 diff -ruN old/arch/arm/boot/dts/sun7i-a20-pcduino3.dts new/arch/arm/boot/dts/sun7i-a20-pcduino3.dts