/*
* MikroTik SPI-NOR RouterBOARDs support
*
+ * - MikroTik RouterBOARD mAP 2nD
* - MikroTik RouterBOARD mAP L-2nD
+ * - MikroTik RouterBOARD 911-2Hn (911 Lite2)
+ * - MikroTik RouterBOARD 911-5Hn (911 Lite5)
+ * - MikroTik RouterBOARD 931-2nD (hAP mini)
* - MikroTik RouterBOARD 941L-2nD
* - MikroTik RouterBOARD 951Ui-2nD
+ * - MikroTik RouterBOARD 952Ui-5ac2nD
+ * - MikroTik RouterBOARD 962UiGS-5HacT2HnT
* - MikroTik RouterBOARD 750UP r2
+ * - MikroTik RouterBOARD 750P-PBr2
* - MikroTik RouterBOARD 750 r2
* - MikroTik RouterBOARD LHG 5nD
+ * - MikroTik RouterBOARD wAP2nD
+ * - MikroTik RouterBOARD wAP G-5HacT2HnDwAP (wAP AC)
+ * - MikroTik RouterBOARD wAP R-2nD
*
* Preliminary support for the following hardware
- * - MikroTik RouterBOARD wAP2nD
* - MikroTik RouterBOARD cAP2nD
- * - MikroTik RouterBOARD mAP2nD
* Furthermore, the cAP lite (cAPL2nD) appears to feature the exact same
* hardware as the mAP L-2nD. It is unknown if they share the same board
* identifier.
*
- * Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org>
+ * Copyright (C) 2017-2018 Thibaut VARENE <varenet@parisc-linux.org>
+ * Copyright (C) 2016 David Hutchison <dhutchison@bluemesh.net>
+ * Copyright (C) 2017 Ryan Mounce <ryan@mounce.com.au>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
+#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/routerboot.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/ar8216_platform.h>
+#include <linux/platform_data/phy-at803x.h>
+#include <linux/platform_data/mdio-gpio.h>
+
#include <asm/prom.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
+#include "pci.h"
#include "routerboot.h"
#define RBSPI_KEYS_POLL_INTERVAL 20 /* msecs */
#define RBSPI_HAS_SSR BIT(4) /* has an SSR on SPI bus 0 */
#define RBSPI_HAS_POE BIT(5)
#define RBSPI_HAS_MDIO1 BIT(6)
+#define RBSPI_HAS_PCI BIT(7)
#define RB_ROUTERBOOT_OFFSET 0x0000
#define RB_BIOS_SIZE 0x1000
.nr_parts = ARRAY_SIZE(rbspi_spi_partitions),
};
-/* Several boards only have a single reset button wired to GPIO 16 */
-#define RBSPI_GPIO_BTN_RESET16 16
-
-static struct gpio_keys_button rbspi_gpio_keys_reset16[] __initdata = {
+/*
+ * Several boards only have a single reset button, use a common
+ * structure for that.
+ */
+static struct gpio_keys_button rbspi_gpio_keys_reset[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RBSPI_GPIO_BTN_RESET16,
+ .gpio = -ENOENT, /* filled dynamically */
.active_low = 1,
},
};
#define RBMAPL_GPIO_LED_USER 14
#define RBMAPL_GPIO_LED_ETH 4
#define RBMAPL_GPIO_LED_WLAN 11
+#define RBMAPL_GPIO_BTN_RESET 16
static struct gpio_led rbmapl_leds[] __initdata = {
{
/* RB 941L-2nD gpios */
#define RBHAPL_GPIO_LED_USER 14
+#define RBHAPL_GPIO_BTN_RESET 16
+
static struct gpio_led rbhapl_leds[] __initdata = {
{
.name = "rb:green:user",
#define RB952_GPIO_LED_USER 4
#define RB952_GPIO_POE_POWER 14
#define RB952_GPIO_POE_STATUS 12
-#define RB952_GPIO_USB_POWER RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER)
+#define RB952_GPIO_BTN_RESET 16
+#define RB952_GPIO_USB_PWROFF RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER)
#define RB952_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN1)
#define RB952_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN2)
#define RB952_GPIO_LED_LAN3 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN3)
},
};
+
+/* RB 962UiGS-5HacT2HnT gpios */
+#define RB962_WIFI_LED_1 1
+#define RB962_WIFI_LED_2 2
+#define RB962_GPIO_POE_STATUS 2
+#define RB962_GPIO_POE_POWER 3
+#define RB962_GPIO_LED_USER 12
+#define RB962_GPIO_USB_PWROFF 13
+#define RB962_GPIO_BTN_RESET 20
+
+static struct gpio_led rb962_leds_gpio[] __initdata = {
+ {
+ .name = "rb:green:user",
+ .gpio = RB962_GPIO_LED_USER,
+ .active_low = 1,
+ },
+};
+
+static const struct ar8327_led_info rb962_leds_ar8327[] = {
+ AR8327_LED_INFO(PHY0_0, HW, "rb:green:port1"),
+ AR8327_LED_INFO(PHY1_0, HW, "rb:green:port2"),
+ AR8327_LED_INFO(PHY2_0, HW, "rb:green:port3"),
+ AR8327_LED_INFO(PHY3_0, HW, "rb:green:port4"),
+ AR8327_LED_INFO(PHY4_0, HW, "rb:green:port5"),
+};
+
+static struct ar8327_pad_cfg rb962_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ .mac06_exchange_dis = true,
+};
+
+static struct ar8327_pad_cfg rb962_ar8327_pad6_cfg = {
+ /* Use SGMII interface for GMAC6 of the AR8337 switch */
+ .mode = AR8327_PAD_MAC_SGMII,
+ .rxclk_delay_en = true,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+};
+
+static struct ar8327_led_cfg rb962_ar8327_led_cfg = {
+ .led_ctrl0 = 0xc737c737,
+ .led_ctrl1 = 0x00000000,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x0030c300,
+ .open_drain = false,
+};
+
+static struct ar8327_platform_data rb962_ar8327_data = {
+ .pad0_cfg = &rb962_ar8327_pad0_cfg,
+ .pad6_cfg = &rb962_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &rb962_ar8327_led_cfg,
+ .num_leds = ARRAY_SIZE(rb962_leds_ar8327),
+ .leds = rb962_leds_ar8327,
+};
+
+static struct mdio_board_info rb962_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .mdio_addr = 0,
+ .platform_data = &rb962_ar8327_data,
+ },
+};
+
/* RB wAP-2nD gpios */
#define RBWAP_GPIO_LED_USER 14
#define RBWAP_GPIO_LED_WLAN 11
+#define RBWAP_GPIO_BTN_RESET 16
static struct gpio_led rbwap_leds[] __initdata = {
{
#define RBMAP_SSR_BIT_LED_WLAN 4
#define RBMAP_SSR_BIT_USB_POWER 5
#define RBMAP_SSR_BIT_LED_APCAP 6
+#define RBMAP_GPIO_BTN_RESET 16
#define RBMAP_GPIO_SSR_CS 11
#define RBMAP_GPIO_LED_POWER 4
#define RBMAP_GPIO_POE_POWER 14
#define RBMAP_GPIO_POE_STATUS 12
-#define RBMAP_GPIO_USB_POWER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_USB_POWER)
+#define RBMAP_GPIO_USB_PWROFF RBSPI_SSR_GPIO(RBMAP_SSR_BIT_USB_POWER)
#define RBMAP_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN1)
#define RBMAP_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN2)
#define RBMAP_GPIO_LED_POEO RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_POEO)
.active_low = 1,
}, {
.name = "rb:green:eth2",
- .gpio = RBMAP_GPIO_LED_WLAN,
+ .gpio = RBMAP_GPIO_LED_LAN2,
.active_low = 1,
}, {
.name = "rb:red:poe_out",
},
};
-static struct gpio_keys_button rblhg_gpio_keys[] __initdata = {
+/* RB w APG-5HacT2HnD (wAP AC) gpios*/
+#define RBWAPGSC_WIFI_LED_1 1
+#define RBWAPGSC_WIFI_LED_2 8
+#define RBWAPGSC_WIFI_LED_3 9
+#define RBWAPGSC_GPIO_LED_POWER 16
+#define RBWAPGSC_GPIO_BTN_RESET 1
+#define RBWAPGSC_GPIO_MDIO_MDC 12
+#define RBWAPGSC_GPIO_MDIO_DATA 11
+#define RBWAPGSC_MDIO_PHYADDR 0
+
+static struct gpio_led rbwapgsc_leds[] __initdata = {
+ {
+ .name = "rb:green:power",
+ .gpio = RBWAPGSC_GPIO_LED_POWER,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+};
+
+static struct mdio_gpio_platform_data rbwapgsc_mdio_data = {
+ .mdc = RBWAPGSC_GPIO_MDIO_MDC,
+ .mdio = RBWAPGSC_GPIO_MDIO_DATA,
+ .phy_mask = ~BIT(RBWAPGSC_MDIO_PHYADDR),
+};
+
+static struct platform_device rbwapgsc_phy_device = {
+ .name = "mdio-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &rbwapgsc_mdio_data
+ },
+};
+
+static struct at803x_platform_data rbwapgsc_at803x_data = {
+ .override_sgmii_aneg = 1,
+};
+
+static struct mdio_board_info rbwapgsc_mdio_info[] = {
+ {
+ .bus_id = "gpio-1",
+ .mdio_addr = RBWAPGSC_MDIO_PHYADDR,
+ .platform_data = &rbwapgsc_at803x_data,
+ },
+};
+
+/* RB911L GPIOs */
+#define RB911L_GPIO_BTN_RESET 15
+#define RB911L_GPIO_LED_1 13
+#define RB911L_GPIO_LED_2 12
+#define RB911L_GPIO_LED_3 4
+#define RB911L_GPIO_LED_4 21
+#define RB911L_GPIO_LED_5 18
+#define RB911L_GPIO_LED_ETH 20
+#define RB911L_GPIO_LED_POWER 11
+#define RB911L_GPIO_LED_USER 3
+#define RB911L_GPIO_PIN_HOLE 14 /* for reference, active low */
+
+static struct gpio_led rb911l_leds[] __initdata = {
+ {
+ .name = "rb:green:eth",
+ .gpio = RB911L_GPIO_LED_ETH,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:led1",
+ .gpio = RB911L_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:led2",
+ .gpio = RB911L_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:led3",
+ .gpio = RB911L_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:led4",
+ .gpio = RB911L_GPIO_LED_4,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:led5",
+ .gpio = RB911L_GPIO_LED_5,
+ .active_low = 1,
+ }, {
+ .name = "rb:green:power",
+ .gpio = RB911L_GPIO_LED_POWER,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ .active_low = 1,
+ .open_drain = 1,
+ }, {
+ .name = "rb:green:user",
+ .gpio = RB911L_GPIO_LED_USER,
+ .active_low = 1,
+ .open_drain = 1,
+ },
+};
+
+/* RB 931-2nD gpios */
+#define RB931_GPIO_BTN_RESET 0
+#define RB931_GPIO_BTN_MODE 9
+#define RB931_GPIO_LED_USER 1
+
+static struct gpio_keys_button rb931_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RBLHG_GPIO_BTN_RESET,
+ .gpio = RB931_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "Mode button",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RB931_GPIO_BTN_MODE,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led rb931_leds[] __initdata = {
+ {
+ .name = "rb:green:user",
+ .gpio = RB931_GPIO_LED_USER,
.active_low = 1,
},
};
+/* RB wAP R-2nD (wAP R) gpios*/
+#define RBWAPR_GPIO_LED_USER 14
+#define RBWAPR_GPIO_LED1 12
+#define RBWAPR_GPIO_LED2 13
+#define RBWAPR_GPIO_LED3 3
+#define RBWAPR_GPIO_PCIE_PWROFF 15
+#define RBWAPR_GPIO_CONTROL 10
+#define RBWAPR_GPIO_BTN_RESET 16
+
+static struct gpio_led rbwapr_leds[] __initdata = {
+ {
+ .name = "rb:green:user",
+ .gpio = RBWAPR_GPIO_LED_USER,
+ .active_low = 0,
+ },{
+ .name = "rb:green:led1",
+ .gpio = RBWAPR_GPIO_LED1,
+ .active_low = 1,
+ },{
+ .name = "rb:green:led2",
+ .gpio = RBWAPR_GPIO_LED2,
+ .active_low = 1,
+ },{
+ .name = "rb:green:led3",
+ .gpio = RBWAPR_GPIO_LED3,
+ .active_low = 0,
+ },
+};
+
static struct gen_74x164_chip_platform_data rbspi_ssr_data = {
.base = RBSPI_SSR_GPIO_BASE,
+ .num_registers = 1,
};
/* the spi-ath79 driver can only natively handle CS0. Other CS are bit-banged */
}
};
-void __init rbspi_wlan_init(u16 id, int wmac_offset)
+void __init rbspi_wlan_init(int wmac_offset)
{
char *art_buf;
u8 wlan_mac[ETH_ALEN];
- art_buf = rb_get_ext_wlan_data(id);
+ art_buf = rb_get_wlan_data();
if (!art_buf)
return;
kfree(art_buf);
}
-/*
+#define RBSPI_MACH_BUFLEN 64
+/*
* Common platform init routine for all SPI NOR devices.
*/
-static int __init rbspi_platform_setup(void)
+static __init const struct rb_info *rbspi_platform_setup(void)
{
const struct rb_info *info;
- char buf[64];
+ char buf[RBSPI_MACH_BUFLEN] = "MikroTik ";
+ char *str;
+ int len = RBSPI_MACH_BUFLEN - strlen(buf) - 1;
info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x20000);
if (!info)
- return -ENODEV;
+ return NULL;
+
+ if (info->board_name) {
+ str = "RouterBOARD ";
+ if (strncmp(info->board_name, str, strlen(str))) {
+ strncat(buf, str, len);
+ len -= strlen(str);
+ }
+ strncat(buf, info->board_name, len);
+ }
+ else
+ strncat(buf, "UNKNOWN", len);
- scnprintf(buf, sizeof(buf), "MikroTik %s",
- (info->board_name) ? info->board_name : "");
mips_set_machine_name(buf);
/* fix partitions based on flash parsing */
rbspi_init_partitions(info);
- return 0;
+ return info;
}
/*
if (flags & RBSPI_HAS_USB)
ath79_register_usb();
+
+ if (flags & RBSPI_HAS_PCI)
+ ath79_register_pci();
}
/*
ath79_register_eth(1);
if (flags & RBSPI_HAS_WLAN0)
- rbspi_wlan_init(0, wmac0_offset);
+ rbspi_wlan_init(wmac0_offset);
if (flags & RBSPI_HAS_WLAN1)
- rbspi_wlan_init(1, wmac1_offset);
+ rbspi_wlan_init(wmac1_offset);
+}
+
+static __init void rbspi_register_reset_button(int gpio)
+{
+ rbspi_gpio_keys_reset[0].gpio = gpio;
+ ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rbspi_gpio_keys_reset),
+ rbspi_gpio_keys_reset);
}
-/*
+/*
* Init the mAP lite hardware (QCA953x).
* The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0.
* Trying to use GMAC0 in direct mode was unsucessful, so we're
{
u32 flags = RBSPI_HAS_WLAN0;
- if (rbspi_platform_setup())
+ if (!rbspi_platform_setup())
return;
rbspi_peripherals_setup(flags);
ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmapl_leds), rbmapl_leds);
/* mAP lite has a single reset button as gpio 16 */
- ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rbspi_gpio_keys_reset16),
- rbspi_gpio_keys_reset16);
+ rbspi_register_reset_button(RBMAPL_GPIO_BTN_RESET);
/* clear internal multiplexing */
ath79_gpio_output_select(RBMAPL_GPIO_LED_ETH, AR934X_GPIO_OUT_GPIO);
{
u32 flags = RBSPI_HAS_WLAN0;
- if (rbspi_platform_setup())
+ if (!rbspi_platform_setup())
return;
rbspi_peripherals_setup(flags);
ath79_register_leds_gpio(-1, ARRAY_SIZE(rbhapl_leds), rbhapl_leds);
/* hAP lite has a single reset button as gpio 16 */
- ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rbspi_gpio_keys_reset16),
- rbspi_gpio_keys_reset16);
+ rbspi_register_reset_button(RBHAPL_GPIO_BTN_RESET);
}
/*
- * The hAP, hEX lite and hEX PoE lite share the same platform
+ * The hAP, hAP ac lite, hEX lite and hEX PoE lite share the same platform
*/
static void __init rbspi_952_750r2_setup(u32 flags)
{
rbspi_peripherals_setup(flags);
- /* GMAC1 is HW MAC + 1, WLAN0 MAC IS HW MAC + 5 */
- rbspi_network_setup(flags, 1, 5, 0);
+ /*
+ * GMAC1 is HW MAC + 1, WLAN0 MAC IS HW MAC + 5 (hAP),
+ * WLAN1 MAC IS HW MAC + 6 (hAP ac lite)
+ */
+ rbspi_network_setup(flags, 1, 5, 6);
if (flags & RBSPI_HAS_USB)
- gpio_request_one(RB952_GPIO_USB_POWER,
+ gpio_request_one(RB952_GPIO_USB_PWROFF, GPIOF_ACTIVE_LOW |
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
+ "USB power off");
if (flags & RBSPI_HAS_POE)
gpio_request_one(RB952_GPIO_POE_POWER,
ath79_register_leds_gpio(-1, ARRAY_SIZE(rb952_leds), rb952_leds);
/* These devices have a single reset button as gpio 16 */
- ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rbspi_gpio_keys_reset16),
- rbspi_gpio_keys_reset16);
+ rbspi_register_reset_button(RB952_GPIO_BTN_RESET);
}
/*
- * Init the hAP hardware (QCA953x).
+ * Init the hAP (ac lite) hardware (QCA953x).
* The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned
* to LAN on the casing, and port 1 being assigned to "internet" (WAN).
* Port 1 is connected to PHY4 (the ports are labelled in reverse physical
* number), so the SoC can be set to connect GMAC0 to PHY4 and GMAC1 to the
* internal switch for the LAN ports.
* The device also has USB, PoE output and an SSR used for LED multiplexing.
+ * The 952Ui-5ac2nD (hAP ac lite) is nearly identical to the hAP, it adds a
+ * QCA9887 5GHz radio via PCI and moves 2.4GHz from WLAN0 to WLAN1.
*/
static void __init rb952_setup(void)
{
- u32 flags = RBSPI_HAS_WLAN0 | RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
+ u32 flags = RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
RBSPI_HAS_SSR | RBSPI_HAS_POE;
- if (rbspi_platform_setup())
+ if (!rbspi_platform_setup())
return;
+ /* differentiate the hAP from the hAP ac lite */
+ if (strstr(mips_get_machine_name(), "952Ui-5ac2nD"))
+ flags |= RBSPI_HAS_WLAN1 | RBSPI_HAS_PCI;
+ else
+ flags |= RBSPI_HAS_WLAN0;
+
rbspi_952_750r2_setup(flags);
}
* Init the hEX (PoE) lite hardware (QCA953x).
* The 750UP r2 (hEX PoE lite) is nearly identical to the hAP, only without
* WLAN. The 750 r2 (hEX lite) is nearly identical to the 750UP r2, only
- * without USB and POE. It shares the same bootloader board identifier.
+ * without USB and POE. The 750P Pbr2 (Powerbox) is nearly identical to hEX PoE
+ * lite, only without USB. It shares the same bootloader board identifier.
*/
static void __init rb750upr2_setup(void)
{
u32 flags = RBSPI_HAS_WAN4 | RBSPI_HAS_SSR;
- if (rbspi_platform_setup())
+ if (!rbspi_platform_setup())
return;
/* differentiate the hEX lite from the hEX PoE lite */
if (strstr(mips_get_machine_name(), "750UP r2"))
flags |= RBSPI_HAS_USB | RBSPI_HAS_POE;
+ /* differentiate the Powerbox from the hEX lite */
+ else if (strstr(mips_get_machine_name(), "750P r2"))
+ flags |= RBSPI_HAS_POE;
+
rbspi_952_750r2_setup(flags);
}
+/*
+ * Init the hAP ac / 962UiGS-5HacT2HnT hardware (QCA9558).
+ * The hAP ac has 5 ethernet ports provided by an AR8337 switch. Port 1 is
+ * assigned to WAN, ports 2-5 are assigned to LAN. Port 0 is connected to the
+ * SoC, ports 1-5 of the switch are connected to physical ports 1-5 in order.
+ * The SFP cage is not assigned by default on RouterOS. Extra work is required
+ * to support this interface as it is directly connected to the SoC (eth1).
+ * Wireless is provided by a 2.4GHz radio on the SoC (WLAN1) and a 5GHz radio
+ * attached via PCI (QCA9880). Red and green WLAN LEDs are populated however
+ * they are not attached to GPIOs, extra work is required to support these.
+ * PoE and USB output power control is supported.
+ */
+static void __init rb962_setup(void)
+{
+ u32 flags = RBSPI_HAS_USB | RBSPI_HAS_POE | RBSPI_HAS_PCI;
+
+ if (!rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ /* Do not call rbspi_network_setup as we have a discrete switch chip */
+ ath79_eth0_pll_data.pll_1000 = 0xae000000;
+ ath79_eth0_pll_data.pll_100 = 0xa0000101;
+ ath79_eth0_pll_data.pll_10 = 0xa0001313;
+
+ ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(rb962_mdio0_info,
+ ARRAY_SIZE(rb962_mdio0_info));
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_register_eth(0);
+
+ /* WLAN1 MAC is HW MAC + 7 */
+ rbspi_wlan_init(7);
+
+ if (flags & RBSPI_HAS_USB)
+ gpio_request_one(RB962_GPIO_USB_PWROFF, GPIOF_ACTIVE_LOW |
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power off");
+
+ /* PoE output GPIO is inverted, set GPIOF_ACTIVE_LOW for consistency */
+ if (flags & RBSPI_HAS_POE)
+ gpio_request_one(RB962_GPIO_POE_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_ACTIVE_LOW |
+ GPIOF_EXPORT_DIR_FIXED,
+ "POE power");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb962_leds_gpio),
+ rb962_leds_gpio);
+
+ /* This device has a single reset button as gpio 20 */
+ rbspi_register_reset_button(RB962_GPIO_BTN_RESET);
+}
+
/*
* Init the LHG hardware (AR9344).
* The LHG 5nD has a single ethernet port connected to PHY0.
{
u32 flags = RBSPI_HAS_WLAN1 | RBSPI_HAS_MDIO1;
- if (rbspi_platform_setup())
+ if (!rbspi_platform_setup())
return;
rbspi_peripherals_setup(flags);
ath79_register_leds_gpio(-1, ARRAY_SIZE(rblhg_leds), rblhg_leds);
- ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rblhg_gpio_keys),
- rblhg_gpio_keys);
+ rbspi_register_reset_button(RBLHG_GPIO_BTN_RESET);
}
/*
- * Init the wAP hardware (EXPERIMENTAL).
+ * Init the wAP hardware.
* The wAP 2nD has a single ethernet port.
*/
static void __init rbwap_setup(void)
{
u32 flags = RBSPI_HAS_WLAN0;
- if (rbspi_platform_setup())
+ if (!rbspi_platform_setup())
return;
rbspi_peripherals_setup(flags);
rbspi_network_setup(flags, 0, 1, 0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwap_leds), rbwap_leds);
+
+ /* wAP has a single reset button as GPIO 16 */
+ rbspi_register_reset_button(RBWAP_GPIO_BTN_RESET);
}
/*
{
u32 flags = RBSPI_HAS_WLAN0;
- if (rbspi_platform_setup())
+ if (!rbspi_platform_setup())
return;
rbspi_peripherals_setup(flags);
}
/*
- * Init the mAP hardware (EXPERIMENTAL).
- * The mAP 2nD has two ethernet ports, PoE output and an SSR for LED
- * multiplexing.
+ * Init the mAP hardware.
+ * The mAP 2nD has two ethernet ports, PoE output, SSR for LED
+ * multiplexing and USB port.
*/
static void __init rbmap_setup(void)
{
- u32 flags = RBSPI_HAS_WLAN0 | RBSPI_HAS_SSR | RBSPI_HAS_POE;
+ u32 flags = RBSPI_HAS_USB | RBSPI_HAS_WLAN0 |
+ RBSPI_HAS_SSR | RBSPI_HAS_POE;
- if (rbspi_platform_setup())
+ if (!rbspi_platform_setup())
return;
rbspi_spi_cs_gpios[1] = RBMAP_GPIO_SSR_CS;
if (flags & RBSPI_HAS_POE)
gpio_request_one(RBMAP_GPIO_POE_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
"POE power");
+ if (flags & RBSPI_HAS_USB)
+ gpio_request_one(RBMAP_GPIO_USB_PWROFF,
+ GPIOF_OUT_INIT_HIGH | GPIOF_ACTIVE_LOW |
+ GPIOF_EXPORT_DIR_FIXED,
+ "USB power off");
+
ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmap_leds), rbmap_leds);
+
+ /* mAP 2nD has a single reset button as gpio 16 */
+ rbspi_register_reset_button(RBMAP_GPIO_BTN_RESET);
+}
+
+/*
+ * Init the wAPGSC (RB wAPG-5HacT2HnD // wAP AC) hardware.
+ * The wAPGSC has one Ethernet port via AR8033 with PoE input, dual radio (SoC
+ * 2.4 GHz and external QCA9880) and a ZT2046Q temperature and voltage sensor
+ * (currently not supported).
+ */
+static void __init rbwapgsc_setup(void)
+{
+ u32 flags = RBSPI_HAS_PCI;
+
+ if (!rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ platform_device_register(&rbwapgsc_phy_device);
+
+ mdiobus_register_board_info(rbwapgsc_mdio_info,
+ ARRAY_SIZE(rbwapgsc_mdio_info));
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.mii_bus_dev = &rbwapgsc_phy_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.phy_mask = BIT(RBWAPGSC_MDIO_PHYADDR);
+ ath79_eth1_data.enable_sgmii_fixup = 1;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+ ath79_eth1_pll_data.pll_100 = 0x80000101;
+ ath79_eth1_pll_data.pll_10 = 0x80001313;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_register_eth(1);
+
+ rbspi_wlan_init(2);
+
+ rbspi_register_reset_button(RBWAPGSC_GPIO_BTN_RESET);
+
+ ath79_gpio_function_enable(QCA955X_GPIO_FUNC_JTAG_DISABLE|
+ QCA955X_GPIO_REG_OUT_FUNC4|
+ QCA955X_GPIO_REG_OUT_FUNC3);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwapgsc_leds),
+ rbwapgsc_leds);
+}
+
+/*
+ * Setup the 911L hardware (AR9344).
+ */
+static void __init rb911l_setup(void)
+{
+ const struct rb_info *info;
+
+ info = rbspi_platform_setup();
+ if (!info)
+ return;
+
+ if (!rb_has_hw_option(info, RB_HW_OPT_NO_NAND)) {
+ /*
+ * Old hardware revisions might be equipped with a NAND flash
+ * chip instead of the 16MiB SPI NOR device. Those boards are
+ * not supported at the moment, so throw a warning and skip
+ * the peripheral setup to avoid messing up the data in the
+ * flash chip.
+ */
+ WARN(1, "The NAND flash on this board is not supported.\n");
+ } else {
+ rbspi_peripherals_setup(0);
+ }
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+
+ rbspi_wlan_init(1);
+
+ rbspi_register_reset_button(RB911L_GPIO_BTN_RESET);
+
+ /* Make the eth LED controllable by software. */
+ ath79_gpio_output_select(RB911L_GPIO_LED_ETH, AR934X_GPIO_OUT_GPIO);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb911l_leds), rb911l_leds);
+}
+
+/*
+ * Init the hAP mini hardware (QCA953x).
+ * The 931-2nD (hAP mini) has 3 ethernet ports, with port 2-3
+ * being assigned to LAN on the casing, and port 1 being assigned
+ * to "internet" (WAN) on the casing. Port 1 is connected to PHY2.
+ * Since WAN is neither PHY0 nor PHY4, we cannot use GMAC0 with this device.
+ */
+static void __init rb931_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN0;
+
+ if (!rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 3 */
+ rbspi_network_setup(flags, 0, 3, 0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb931_leds), rb931_leds);
+
+ /* hAP mini has two buttons */
+ ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rb931_gpio_keys),
+ rb931_gpio_keys);
}
+/*
+ * Init the wAP R hardware.
+ * The wAP R-2nD has a single ethernet port and a mini PCIe slot.
+ * The OEM source shows it has usb (used over PCIe for LTE devices),
+ * and the 'control' GPIO is assumed to be an output pin not tied to an LED.
+ */
+static void __init rbwapr_setup(void)
+{
+ u32 flags = RBSPI_HAS_WLAN0 | RBSPI_HAS_USB | RBSPI_HAS_PCI;
+
+ if (!rbspi_platform_setup())
+ return;
+
+ rbspi_peripherals_setup(flags);
+
+ /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */
+ rbspi_network_setup(flags, 0, 1, 0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwapr_leds), rbwapr_leds);
+
+ gpio_request_one(RBWAPR_GPIO_PCIE_PWROFF, GPIOF_OUT_INIT_HIGH |
+ GPIOF_ACTIVE_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "PCIE power off");
+
+ gpio_request_one(RBWAPR_GPIO_CONTROL, GPIOF_OUT_INIT_LOW |
+ GPIOF_ACTIVE_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "control");
+
+ rbspi_register_reset_button(RBWAPR_GPIO_BTN_RESET);
+}
MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_911L, "911L", rb911l_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_962, "962", rb962_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2, "750-hb", rb750upr2_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_LHG5, "lhg", rblhg_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAPR, "wap-lte", rbwapr_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP, "cap-hb", rbcap_setup);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP, "map2-hb", rbmap_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAPAC, "wapg-sc", rbwapgsc_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_931, "931", rb931_setup);
projects / openwrt / openwrt.git / blobdiff