ath79: add support for TP-Link Archer C6 v2

[openwrt/openwrt.git] / target / linux / ath79 / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 7fe19c0604bbdad2cb383e6e4444b74c423a72f5..441893a752789508ba3b51f0bee6e5239d8df818 100644 (file)
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -96,11 +96,15 @@ case "$FIRMWARE" in
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
                ;;
+       elecom,wrc-1750ghbk2-i)
+               ath10kcal_extract "ART" 20480 2116
+               ;;
        glinet,ar750s|\
        tplink,re450-v2)
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
                ;;
+       engenius,ews511ap|\
        glinet,gl-x750)
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
@@ -151,7 +155,8 @@ case "$FIRMWARE" in
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
        tplink,archer-c58-v1|\
-       tplink,archer-c59-v1)
+       tplink,archer-c59-v1|\
+       tplink,archer-c6-v2)
                ath10kcal_extract "art" 20480 12064
                ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 8) -1)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \