ath79: Add support for OpenMesh OM5P

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts

diff --git a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
index 74cf1315b659b6bcde9389fe139b962cb646f25a..a3f9ec28a4717381e4703980935f84b1d073be45 100644 (file)
--- a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
+++ b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts
@@ -1,25 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "qca955x.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca955x.dtsi"
-
 / {
        compatible = "mikrotik,routerboard-wap-g-5hact2hnd", "qca,qca9556";
        model = "MikroTik RouterBOARD wAP G-5HacT2HnD";
 
        aliases {
-               label-mac-device = &eth1;
                mdio-gpio1 = &mdio2;
                serial0 = &uart;
        };
 
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
        keys {
                compatible = "gpio-keys";
 
@@ -53,8 +47,6 @@
 &eth1 {
        status = "okay";
 
-       mtd-mac-address = <&hard_config 0x10>;
-
        pll-data = <0x03000101 0x80000101 0x80001313>;
        phy-handle = <&phy0>;
 
@@ -68,8 +60,6 @@
 &spi {
        status = "okay";
 
-       num-cs = <1>;
-
        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
@@ -84,37 +74,33 @@
                                label = "RouterBoot";
                                reg = <0x0 0x20000>;
                                read-only;
-                               compatible = "fixed-partitions";
+                               compatible = "mikrotik,routerboot-partitions";
                                #address-cells = <1>;
                                #size-cells = <1>;
 
                                partition@0 {
                                        label = "bootloader1";
-                                       reg = <0x0 0xe000>;
+                                       reg = <0x0 0x0>;
                                        read-only;
                                };
 
-                               hard_config: partition@e000 {
-                                       label = "hard_config";
-                                       reg = <0xe000 0x1000>;
+                               hard_config: hard_config {
                                        read-only;
                                };
 
-                               partition@f000 {
-                                       label = "bios";
-                                       reg = <0xf000 0x1000>;
+                               bios {
+                                       size = <0x1000>;
                                        read-only;
                                };
 
                                partition@10000 {
                                        label = "bootloader2";
-                                       reg = <0x10000 0xf000>;
+                                       reg = <0x10000 0x0>;
                                        read-only;
                                };
 
-                               partition@1f000 {
+                               soft_config {
                                        label = "soft_config";
-                                       reg = <0x1f000 0x1000>;
                                };
                        };