ath79: add support for ELECOM WRC-1750GHBK2-I/C

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9563_elecom_wrc-300ghbk2-i.dts

diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts b/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts
index bb1f350150e68fe94c0531dd0e1704c78c708bd2..c823f4a34281e5c694d1415177596479c09405c3 100644 (file)
--- a/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts
+++ b/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts
@@ -4,156 +4,43 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca956x.dtsi"
+#include "qca9563_elecom_wrc-ghbk2-i.dtsi"
 
 / {
        model = "ELECOM WRC-300GHBK2-I";
        compatible = "elecom,wrc-300ghbk2-i", "qca,qca9563";
+};
 
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-               led-upgrade = &power;
+&leds {
+       power: power {
+               label = "elecom:white:power";
+               gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+               default-state = "on";
        };
 
-       leds {
-               compatible = "gpio-leds";
-
-               power: power {
-                       label = "wrc-300ghbk2-i:white:power";
-                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
-               };
-
-               wlan2g {
-                       label = "wrc-300ghbk2-i:white:wlan2g";
-                       gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               wps {
-                       label = "wrc-300ghbk2-i:red:wps";
-                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               button_wps {
-                       label = "wps";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               ap {
-                       label = "ap";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-                       linux,input-type = <EV_SW>;
-                       debounce-interval = <60>;
-               };
+       wlan2g {
+               label = "elecom:white:wlan2g";
+               gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+               linux,default-trigger = "phy0tpt";
        };
 };
 
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               label = "nvram";
-                               reg = <0x050000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@70000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x070000 0x770000>;
-                       };
-
-                       partition@7e0000 {
-                               label = "hwconfig";
-                               reg = <0x7e0000 0x010000>;
-                               read-only;
-                       };
-
-                       ART: partition@7f0000 {
-                               label = "ART";
-                               reg = <0x7f0000 0x010000>;
-                               read-only;
-                       };
-               };
+&partitions {
+       partition@70000 {
+               compatible = "denx,uimage";
+               label = "firmware";
+               reg = <0x070000 0x770000>;
        };
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-               phy-mode = "sgmii";
 
-               qca,ar8327-initvals = <
-                       0x04 0x00000080 /* PORT0 PAD MODE CTRL */
-                       0x50 0xcf37cf37 /* LED_CTRL0 */
-                       0x54 0x00000000 /* LED_CTRL1 */
-                       0x58 0x00000000 /* LED_CTRL2 */
-                       0x5c 0x03ffff00 /* LED_CTRL3 */
-                       0x7c 0x0000007e /* PORT0_STATUS */
-               >;
+       partition@7e0000 {
+               label = "hwconfig";
+               reg = <0x7e0000 0x010000>;
+               read-only;
        };
-};
-
-&eth0 {
-       status = "okay";
-
-       mtd-mac-address = <&ART 0x1002>;
-       mtd-mac-address-increment = <(-1)>;
-       phy-mode = "sgmii";
-       phy-handle = <&phy0>;
-};
 
-&uart {
-       status = "okay";
-};
-
-&wmac {
-       status = "okay";
-       mtd-cal-data = <&ART 0x1000>;
+       ART: partition@7f0000 {
+               label = "ART";
+               reg = <0x7f0000 0x010000>;
+               read-only;
+       };
 };