ramips: add support for ELECOM WRC-1167GHBK2-S

[openwrt/openwrt.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index b7e5fb6ff935e725ba0192d42e57aeaf0de00273..de086cf2487293a8e47ac0e0aef31c0e7be019ef 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -44,6 +44,7 @@ ramips_setup_interfaces()
        all0256n-8M|\
        all5002|\
        all5003|\
+       bocco|\
        broadway|\
        dcs-930|\
        dcs-930l-b1|\
@@ -113,7 +114,8 @@ ramips_setup_interfaces()
        vr500|\
        wf-2881|\
        whr-g300n|\
-       witi|\
+       mqmaker,witi-256m|\
+       mqmaker,witi-512m|\
        wl-wn575a3|\
        wndr3700v5|\
        youku-yk1|\
@@ -141,6 +143,7 @@ ramips_setup_interfaces()
        mzk-ex750np|\
        na930|\
        pbr-d1|\
+       ravpower,wd03|\
        tama,w06|\
        u25awf-h1|\
        wli-tx4-ag300n|\
@@ -192,6 +195,7 @@ ramips_setup_interfaces()
        gl-mt300n|\
        gl-mt750|\
        hg255d|\
+       iodata,wn-gx300gr|\
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
@@ -201,6 +205,7 @@ ramips_setup_interfaces()
        tplink,c20-v4|\
        tplink,c50-v3|\
        tplink,tl-mr3420-v5|\
+       tplink,tl-wr842n-v5|\
        tl-wr840n-v4|\
        tl-wr840n-v5|\
        tl-wr841n-v13|\
@@ -221,11 +226,12 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0"
                ;;
-       dir-860l-b1)
+       dir-860l-b1|\
+       elecom,wrc-1167ghbk2-s)
                ucidef_add_switch "switch0" \
                        "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
                ;;
-       gb-pc1|\
+       gnubee,gb-pc1|\
        gnubee,gb-pc2)
                ucidef_add_switch "switch0" \
                        "0:lan" "4:lan" "6@eth0"
@@ -445,6 +451,10 @@ ramips_setup_macs()
        e1700)
                wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
                ;;
+       elecom,wrc-1167ghbk2-s|\
+       sk-wb8)
+               wan_mac=$(mtd_get_mac_binary factory 57350)
+               ;;
        gl-mt300n-v2|\
        whr-g300n)
                wan_mac=$(mtd_get_mac_binary factory 4)
@@ -456,6 +466,9 @@ ramips_setup_macs()
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       iodata,wn-gx300gr)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1)
+               ;;
        kn_rc|\
        kn_rf|\
        kng_rc)
@@ -506,9 +519,6 @@ ramips_setup_macs()
                lan_mac=$(macaddr_setbit_la "$lan_mac")
                wan_mac=$(mtd_get_mac_binary factory 32772)
                ;;
-       sk-wb8)
-               wan_mac=$(mtd_get_mac_binary factory 57350)
-               ;;
        tew-691gr)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
                ;;