ramips: fix WHR-600D eeprom dt property

[openwrt/openwrt.git] / target / linux / ramips / dts / PSR-680W.dts

diff --git a/target/linux/ramips/dts/PSR-680W.dts b/target/linux/ramips/dts/PSR-680W.dts
index 1e5bfc54a49eab5f4191efd1ec25d56342f5be7c..f749a4e5899472b1ae24d06b27da87a10bf868fa 100644 (file)
--- a/target/linux/ramips/dts/PSR-680W.dts
+++ b/target/linux/ramips/dts/PSR-680W.dts
@@ -1,55 +1,52 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
-       #address-cells = <1>;
-       #size-cells = <1>;
        compatible = "PSR-680W", "ralink,rt3052-soc";
        model = "Petatel PSR-680W Wireless 3G Router";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
        chosen {
-               bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmmux = "i2c", "uartlite", "sdram";
-                       ralink,gpiomux = "spi", "jtag", "mdio", "rgmii";
-                       ralink,uartmux = "i2s uartf";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
+               bootargs = "console=ttyS0,115200";
        };
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
-       };
 
-       ethernet@10100000 {
-               status = "okay";
-       };
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
 
-       esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x3e>;
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x3b0000>;
+               };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
+
                wan {
                        label = "psr-680w:red:wan";
                        gpios = <&gpio0 19 1>;
@@ -61,18 +58,36 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 0 1>;
-                       linux,code = <0x198>;
+                       linux,code = <KEY_RESTART>;
                };
        };
+};
 
-       wmac@10180000 {
-               status = "okay";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
        };
+};
 
-       otg@101c0000 {
-               status = "okay";
-       };
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+       mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+       status = "okay";
 };