ramips: add support for Linksys EA7500 v2

[openwrt/openwrt.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 252f9f1dda6c426007d5e411991f8a51f4e4c481..7734c02d37a8d189cadcd701ae7c2154e25eef0a 100755 (executable)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -42,10 +42,12 @@ ramips_setup_interfaces()
        mikrotik,routerboard-750gr3)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
                ;;
-       ubnt,edgerouter-x|\
-       ubnt,edgerouter-x-sfp)
+       ubnt,edgerouter-x)
                ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4"
                ;;
+       ubnt,edgerouter-x-sfp)
+               ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4 eth5"
+               ;;
        *)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
@@ -89,10 +91,17 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                label_mac=$wan_mac
                ;;
+       linksys,ea7500-v2)
+               lan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+               wan_mac=$lan_mac
+               label_mac=$lan_mac
+               ;;
        mikrotik,routerboard-750gr3|\
        mikrotik,routerboard-m11g|\
        mikrotik,routerboard-m33g)
-               label_mac=$(mtd_get_mac_binary hard_config 0x10)
+               label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base")
+               wan_mac=$label_mac
+               lan_mac=$(macaddr_add $label_mac 1)
                ;;
        zbtlink,zbt-we1326|\
        zbtlink,zbt-wg3526-16m|\