activate failsafe on all ports of the switch and not just port 0.

Sometimes the port 0 was the WAN port or there could be some device
where the port 0 is not wired to an actual Ethernet port. Now telnet in
failsafe will listen on all ports of the switch so user do not have to
search for the correct port any more. This change will make the switch
leak traffic between the WAN and the LAN port, but you should not use
failsafe while connected to a untrusted network.

SVN-Revision: 33544

diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
index fdc7c71ca7e03ed78a96f6a56298af45b21e6fe7..a0a3033465bd0cd16e453d3a9fa8babebfad983a 100644 (file)
--- a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
@@ -31,7 +31,7 @@ preinit_net_echo() {
                        port_net_echo $1
                }; done
                
                        port_net_echo $1
                }; done
                

-               echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+               echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports

                
        } || port_net_echo $1
 }
                
        } || port_net_echo $1
 }