ar71xx: wpa8630: change board name to tl-wpa8630
authorHenryk Heisig <hyniu@o2.pl>
Mon, 7 Nov 2016 14:37:25 +0000 (15:37 +0100)
committerJohn Crispin <john@phrozen.org>
Tue, 8 Nov 2016 10:17:10 +0000 (11:17 +0100)
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
13 files changed:
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c [deleted file]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/image/tp-link.mk

index 01308b5..cde3a94 100755 (executable)
@@ -521,6 +521,11 @@ archer-c7)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy1tpt"
        ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy0tpt"
        ;;
+tl-wpa8630)
+       ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+       ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
+       ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
+       ;;
 tl-wr802n-v1)
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
        ;;
@@ -638,11 +643,6 @@ wnr612-v2)
        ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
        ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
        ;;
-wpa8630)
-       ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
-       ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
-       ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
-       ;;
 wpn824n)
        ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
        ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
index e6489af..24dfced 100755 (executable)
@@ -366,6 +366,10 @@ ar71xx_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
                ;;
+       tl-wpa8630)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
+               ;;
        tl-wr1043nd)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
@@ -398,10 +402,6 @@ ar71xx_setup_interfaces()
                ucidef_add_switch_port_attr "switch0" 2 led 9
                ucidef_add_switch_port_attr "switch0" 5 led 2
                ;;
-       wpa8630)
-               ucidef_add_switch "switch0" \
-                       "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
-               ;;
        wpj344)
                ucidef_add_switch "switch0" \
                        "0@eth0" "3:lan" "2:wan"
index 8b038e4..881b3c6 100644 (file)
@@ -44,7 +44,7 @@ get_status_led() {
        mr12|\
        mr16|\
        nbg6616|\
-       wpa8630)
+       tl-wpa8630)
                status_led="$board:green:power"
                ;;
        ap96)
index c95cfb9..872e6a8 100644 (file)
@@ -86,14 +86,14 @@ case "$FIRMWARE" in
                ath10kcal_extract "ART" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
                ;;
+       tl-wpa8630)
+               ath10kcal_extract "ART" 20480 2116
+               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+               ;;
        unifiac-lite | \
        unifiac-pro)
                ath10kcal_extract "EEPROM" 20480 2116
                ;;
-       wpa8630)
-               ath10kcal_extract "ART" 20480 2116
-               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
-               ;;
        esac
        ;;
 "ath10k/cal-pci-0000:01:00.0.bin")
index d7c4131..7554247 100755 (executable)
@@ -985,6 +985,9 @@ ar71xx_board_detect() {
        *"TL-WDR6500 v2")
                name="tl-wdr6500-v2"
                ;;
+       *TL-WPA8630)
+               name="tl-wpa8630"
+               ;;
        *TL-WR741ND)
                name="tl-wr741nd"
                ;;
@@ -1129,9 +1132,6 @@ ar71xx_board_detect() {
        *"WNR1000 V2")
                name="wnr1000-v2"
                ;;
-       *WPA8630)
-               name="wpa8630"
-               ;;
        *WPN824N)
                name="wpn824n"
                ;;
index 3c7976d..c4a9f8a 100755 (executable)
@@ -366,6 +366,7 @@ platform_check_image() {
        tl-wdr4300|\
        tl-wdr4900-v2|\
        tl-wdr6500-v2|\
+       tl-wpa8630|\
        tl-wr1041n-v2|\
        tl-wr1043nd-v2|\
        tl-wr1043nd|\
@@ -386,8 +387,7 @@ platform_check_image() {
        tl-wr842n-v3|\
        tl-wr941nd-v5|\
        tl-wr941nd-v6|\
-       tl-wr941nd|\
-       wpa8630)
+       tl-wr941nd)
                local magic_ver="0100"
 
                case "$board" in
index 64c3604..4fe80f0 100644 (file)
@@ -163,6 +163,7 @@ CONFIG_ATH79_MACH_TL_WDR3320_V2=y
 CONFIG_ATH79_MACH_TL_WDR3500=y
 CONFIG_ATH79_MACH_TL_WDR4300=y
 CONFIG_ATH79_MACH_TL_WDR6500_V2=y
+CONFIG_ATH79_MACH_TL_WPA8630=y
 CONFIG_ATH79_MACH_TL_WR1041N_V2=y
 CONFIG_ATH79_MACH_TL_WR1043ND=y
 CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
@@ -194,7 +195,6 @@ CONFIG_ATH79_MACH_WNR2000_V3=y
 CONFIG_ATH79_MACH_WNR2000_V4=y
 CONFIG_ATH79_MACH_WNR2200=y
 CONFIG_ATH79_MACH_WP543=y
-CONFIG_ATH79_MACH_WPA8630=y
 CONFIG_ATH79_MACH_WPE72=y
 CONFIG_ATH79_MACH_WPJ342=y
 CONFIG_ATH79_MACH_WPJ344=y
index 60f6d9a..db3b9bd 100644 (file)
@@ -1708,8 +1708,8 @@ config ATH79_MACH_DAP_2695_A1
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
-config ATH79_MACH_WPA8630
-       bool "TP-Link WPA8630 support"
+config ATH79_MACH_TL_WPA8630
+       bool "TP-Link TL-WPA8630 support"
        select SOC_QCA956X
        select ATH79_DEV_AP9X_PCI if PCI
        select ATH79_DEV_ETH
index cbfd7a4..580d2e2 100644 (file)
@@ -169,6 +169,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2)              += mach-tl-wdr3320-v2.o
 obj-$(CONFIG_ATH79_MACH_TL_WDR3500)            += mach-tl-wdr3500.o
 obj-$(CONFIG_ATH79_MACH_TL_WDR4300)            += mach-tl-wdr4300.o
 obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2)         += mach-tl-wdr6500-v2.o
+obj-$(CONFIG_ATH79_MACH_TL_WPA8630)            += mach-tl-wpa8630.o
 obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2)         += mach-tl-wr1041n-v2.o
 obj-$(CONFIG_ATH79_MACH_TL_WR1043ND)           += mach-tl-wr1043nd.o
 obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2)                += mach-tl-wr1043nd-v2.o
@@ -200,7 +201,6 @@ obj-$(CONFIG_ATH79_MACH_WNR2000_V3)         += mach-wnr2000-v3.o
 obj-$(CONFIG_ATH79_MACH_WNR2000_V4)            += mach-wnr2000-v4.o
 obj-$(CONFIG_ATH79_MACH_WNR2200)               += mach-wnr2200.o
 obj-$(CONFIG_ATH79_MACH_WP543)                 += mach-wp543.o
-obj-$(CONFIG_ATH79_MACH_WPA8630)               += mach-wpa8630.o
 obj-$(CONFIG_ATH79_MACH_WPE72)                 += mach-wpe72.o
 obj-$(CONFIG_ATH79_MACH_WPJ342)                        += mach-wpj342.o
 obj-$(CONFIG_ATH79_MACH_WPJ344)                        += mach-wpj344.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c
new file mode 100644 (file)
index 0000000..acdd7c3
--- /dev/null
@@ -0,0 +1,166 @@
+/*
+ *  TP-Link TL-WPA8630 board support
+ *
+ *  Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+
+#define TL_WPA8630_KEYS_POLL_INTERVAL  20
+#define TL_WPA8630_KEYS_DEBOUNCE_INTERVAL      (3 * TL_WPA8630_KEYS_POLL_INTERVAL)
+
+#define TL_WPA8630_GPIO_LED_POWER              1
+#define TL_WPA8630_GPIO_LED_LAN                5
+#define TL_WPA8630_GPIO_LED_WLAN               19
+#define TL_WPA8630_GPIO_LED_WLAN5              21
+
+#define TL_WPA8630_GPIO_BTN_RESET              2
+#define TL_WPA8630_GPIO_BTN_RFKILL             8
+#define TL_WPA8630_GPIO_BTN_LED                6
+#define TL_WPA8630_GPIO_BTN_PAIR               7
+
+#define TL_WPA8630_MAC0_OFFSET         0x0000
+#define TL_WPA8630_WMAC_CALDATA_OFFSET 0x1000
+#define TL_WPA8630_PCI_CALDATA_OFFSET  0x5000
+
+static struct flash_platform_data tl_wpa8630_flash_data = {
+       .type = "s25fl064k",
+};
+
+static struct gpio_led tl_wpa8630_leds_gpio[] __initdata = {
+       {
+               .name           = "tl-wpa8630:green:power",
+               .gpio           = TL_WPA8630_GPIO_LED_POWER,
+               .active_low     = 1,
+       },
+       {
+               .name           = "tl-wpa8630:green:lan",
+               .gpio           = TL_WPA8630_GPIO_LED_LAN,
+               .active_low     = 1,
+       },
+       {
+               .name           = "tl-wpa8630:green:wlan",
+               .gpio           = TL_WPA8630_GPIO_LED_WLAN,
+               .active_low     = 1,
+       },
+       {
+               .name           = "tl-wpa8630:green:wlan5",
+               .gpio           = TL_WPA8630_GPIO_LED_WLAN5,
+               .active_low     = 1,
+       },
+};
+
+static struct gpio_keys_button tl_wpa8630_gpio_keys[] __initdata = {
+       {
+               .desc                   = "Reset button",
+               .type                   = EV_KEY,
+               .code                   = KEY_RESTART,
+               .debounce_interval      = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
+               .gpio                   = TL_WPA8630_GPIO_BTN_RESET,
+               .active_low             = 1,
+       },
+       {
+               .desc                   = "RFKILL button",
+               .type                   = EV_KEY,
+               .code                   = KEY_RFKILL,
+               .debounce_interval      = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
+               .gpio                   = TL_WPA8630_GPIO_BTN_RFKILL,
+               .active_low             = 1,
+       },
+       {
+               .desc                   = "LED",
+               .type                   = EV_KEY,
+               .code                   = BTN_0,
+               .debounce_interval      = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
+               .gpio                   = TL_WPA8630_GPIO_BTN_LED,
+               .active_low             = 1,
+       },
+       {
+               .desc                   = "Pair",
+               .type                   = EV_KEY,
+               .code                   = BTN_1,
+               .debounce_interval      = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
+               .gpio                   = TL_WPA8630_GPIO_BTN_PAIR,
+               .active_low             = 1,
+       },
+};
+
+/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */
+static struct ar8327_pad_cfg tl_wpa8630_qca8337_pad0_cfg = {
+       .mode = AR8327_PAD_MAC_SGMII,
+       .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data tl_wpa8630_qca8337_data = {
+       .pad0_cfg = &tl_wpa8630_qca8337_pad0_cfg,
+       .port0_cfg = {
+               .force_link = 1,
+               .speed = AR8327_PORT_SPEED_1000,
+               .duplex = 1,
+               .txpause = 1,
+               .rxpause = 1,
+       },
+};
+
+static struct mdio_board_info tl_wpa8630_mdio0_info[] = {
+       {
+               .bus_id = "ag71xx-mdio.0",
+               .phy_addr = 0,
+               .platform_data = &tl_wpa8630_qca8337_data,
+       },
+};
+
+static void __init tl_wpa8630_setup(void)
+{
+       u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       ath79_register_m25p80(&tl_wpa8630_flash_data);
+
+       ath79_init_mac(ath79_eth0_data.mac_addr,
+               art + TL_WPA8630_MAC0_OFFSET, 0);
+
+       platform_device_register(&ath79_mdio0_device);
+
+       mdiobus_register_board_info(tl_wpa8630_mdio0_info,
+                                   ARRAY_SIZE(tl_wpa8630_mdio0_info));
+
+       /* GMAC0 is connected to an AR8337 switch */
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+       ath79_eth0_data.phy_mask = ~BIT(4);
+       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+       ath79_register_eth(0);
+
+       ath79_register_wmac(art + TL_WPA8630_WMAC_CALDATA_OFFSET, mac);
+
+       ap91_pci_init(art + TL_WPA8630_PCI_CALDATA_OFFSET, NULL);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wpa8630_leds_gpio),
+                               tl_wpa8630_leds_gpio);
+
+       ath79_register_gpio_keys_polled(-1, TL_WPA8630_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(tl_wpa8630_gpio_keys),
+                                       tl_wpa8630_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WPA8630, "TL-WPA8630", "TP-Link TL-WPA8630",
+       tl_wpa8630_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c
deleted file mode 100644 (file)
index d86adaf..0000000
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  TP-Link WPA8630 board support
- *
- *  Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-
-#define WPA8630_KEYS_POLL_INTERVAL     20
-#define WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * WPA8630_KEYS_POLL_INTERVAL)
-
-#define WPA8630_GPIO_LED_POWER         1
-#define WPA8630_GPIO_LED_LAN           5
-#define WPA8630_GPIO_LED_WLAN          19
-#define WPA8630_GPIO_LED_WLAN5         21
-
-#define WPA8630_GPIO_BTN_RESET         2
-#define WPA8630_GPIO_BTN_RFKILL                8
-#define WPA8630_GPIO_BTN_0             6
-#define WPA8630_GPIO_BTN_1             7
-
-#define WPA8630_MAC0_OFFSET            0x0000
-#define WPA8630_WMAC_CALDATA_OFFSET    0x1000
-#define WPA8630_PCI_CALDATA_OFFSET     0x5000
-
-static struct flash_platform_data wpa8630_flash_data = {
-       .type = "s25fl064k",
-};
-
-static struct gpio_led wpa8630_leds_gpio[] __initdata = {
-       {
-               .name           = "wpa8630:green:power",
-               .gpio           = WPA8630_GPIO_LED_POWER,
-               .active_low     = 1,
-       },
-       {
-               .name           = "wpa8630:green:lan",
-               .gpio           = WPA8630_GPIO_LED_LAN,
-               .active_low     = 1,
-       },
-       {
-               .name           = "wpa8630:green:wlan",
-               .gpio           = WPA8630_GPIO_LED_WLAN,
-               .active_low     = 1,
-       },
-       {
-               .name           = "wpa8630:green:wlan5",
-               .gpio           = WPA8630_GPIO_LED_WLAN5,
-               .active_low     = 1,
-       },
-};
-
-static struct gpio_keys_button wpa8630_gpio_keys[] __initdata = {
-       {
-               .desc                   = "Reset button",
-               .type                   = EV_KEY,
-               .code                   = KEY_RESTART,
-               .debounce_interval      = WPA8630_KEYS_DEBOUNCE_INTERVAL,
-               .gpio                   = WPA8630_GPIO_BTN_RESET,
-               .active_low             = 1,
-       },
-       {
-               .desc                   = "RFKILL button",
-               .type                   = EV_KEY,
-               .code                   = KEY_RFKILL,
-               .debounce_interval      = WPA8630_KEYS_DEBOUNCE_INTERVAL,
-               .gpio                   = WPA8630_GPIO_BTN_RFKILL,
-               .active_low             = 1,
-       },
-       {
-               .desc                   = "LED",
-               .type                   = EV_KEY,
-               .debounce_interval      = WPA8630_KEYS_DEBOUNCE_INTERVAL,
-               .gpio                   = WPA8630_GPIO_BTN_0,
-               .active_low             = 1,
-       },
-       {
-               .desc                   = "Pair",
-               .type                   = EV_KEY,
-               .debounce_interval      = WPA8630_KEYS_DEBOUNCE_INTERVAL,
-               .gpio                   = WPA8630_GPIO_BTN_1,
-               .active_low             = 1,
-       },
-};
-
-/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */
-static struct ar8327_pad_cfg wpa8630_qca8337_pad0_cfg = {
-       .mode = AR8327_PAD_MAC_SGMII,
-       .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data wpa8630_qca8337_data = {
-       .pad0_cfg = &wpa8630_qca8337_pad0_cfg,
-       .port0_cfg = {
-               .force_link = 1,
-               .speed = AR8327_PORT_SPEED_1000,
-               .duplex = 1,
-               .txpause = 1,
-               .rxpause = 1,
-       },
-};
-
-static struct mdio_board_info wpa8630_mdio0_info[] = {
-       {
-               .bus_id = "ag71xx-mdio.0",
-               .phy_addr = 0,
-               .platform_data = &wpa8630_qca8337_data,
-       },
-};
-
-static void __init wpa8630_setup(void)
-{
-       u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
-       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-       ath79_register_m25p80(&wpa8630_flash_data);
-
-       ath79_init_mac(ath79_eth0_data.mac_addr,
-               art + WPA8630_MAC0_OFFSET, 0);
-
-       platform_device_register(&ath79_mdio0_device);
-
-       mdiobus_register_board_info(wpa8630_mdio0_info,
-                                   ARRAY_SIZE(wpa8630_mdio0_info));
-
-       /* GMAC0 is connected to an AR8337 switch */
-       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-       ath79_eth0_data.phy_mask = ~BIT(4);
-       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
-       ath79_register_eth(0);
-
-       ath79_register_wmac(art + WPA8630_WMAC_CALDATA_OFFSET, mac);
-
-       ap91_pci_init(art + WPA8630_PCI_CALDATA_OFFSET, NULL);
-
-       ath79_register_leds_gpio(-1, ARRAY_SIZE(wpa8630_leds_gpio),
-                               wpa8630_leds_gpio);
-
-       ath79_register_gpio_keys_polled(-1, WPA8630_KEYS_POLL_INTERVAL,
-                                       ARRAY_SIZE(wpa8630_gpio_keys),
-                                       wpa8630_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPA8630, "WPA8630", "TP-Link WPA8630",
-       wpa8630_setup);
index d252a2b..3ebcbc0 100644 (file)
@@ -198,6 +198,7 @@ enum ath79_mach_type {
        ATH79_MACH_TL_WDR4300,                  /* TP-LINK TL-WDR4300 */
        ATH79_MACH_TL_WDR4900_V2,               /* TP-LINK TL-WDR4900 v2 */
        ATH79_MACH_TL_WDR6500_V2,               /* TP-LINK TL-WDR6500 v2 */
+       ATH79_MACH_TL_WPA8630,                  /* TP-Link TL-WPA8630 */
        ATH79_MACH_TL_WR1041N_V2,               /* TP-LINK TL-WR1041N v2 */
        ATH79_MACH_TL_WR1043ND,                 /* TP-LINK TL-WR1043ND */
        ATH79_MACH_TL_WR1043ND_V2,              /* TP-LINK TL-WR1043ND v2 */
@@ -258,7 +259,6 @@ enum ath79_mach_type {
        ATH79_MACH_WNR2200,                     /* NETGEAR WNR2200 */
        ATH79_MACH_WNR612_V2,                   /* NETGEAR WNR612 v2 */
        ATH79_MACH_WP543,                       /* Compex WP543 */
-       ATH79_MACH_WPA8630,                     /* TP-Link WPA8630 */
        ATH79_MACH_WPE72,                       /* Compex WPE72 */
        ATH79_MACH_WPJ342,                      /* Compex WPJ342 */
        ATH79_MACH_WPJ344,                      /* Compex WPJ344 */
index b494411..8370a19 100644 (file)
@@ -371,6 +371,18 @@ define Device/tl-mr3420-v2
 endef
 TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2
 
+define Device/tl-wpa8630
+    $(Device/tplink-8mlzma)
+    DEVICE_TITLE := TP-LINK TL-WPA8630
+    DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
+    BOARDNAME := TL-WPA8630
+    DEVICE_PROFILE := TL-WPA8630
+    TPLINK_HWID := 0x86300001
+    MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware)
+    IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000
+endef
+TARGET_DEVICES += tl-wpa8630
+
 define Device/tl-wr703n-v1
     $(Device/tplink-4mlzma)
     DEVICE_TITLE := TP-LINK TL-WR703N
@@ -913,15 +925,3 @@ define Device/tl-wa7210n-v2
     CONSOLE := ttyATH0,115200
 endef
 TARGET_DEVICES += tl-wa7210n-v2
-
-define Device/wpa8630
-    $(Device/tplink-8mlzma)
-    DEVICE_TITLE := TP-LINK WPA8630
-    DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
-    BOARDNAME := WPA8630
-    DEVICE_PROFILE := WPA8630
-    TPLINK_HWID := 0x86300001
-    MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware)
-    IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000
-endef
-TARGET_DEVICES += wpa8630