+++ /dev/null
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AG71XX_DEBUG_FS is not set
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ATH79=y
-CONFIG_ATH79_DEV_AP9X_PCI=y
-CONFIG_ATH79_DEV_DSA=y
-CONFIG_ATH79_DEV_ETH=y
-CONFIG_ATH79_DEV_GPIO_BUTTONS=y
-CONFIG_ATH79_DEV_LEDS_GPIO=y
-CONFIG_ATH79_DEV_M25P80=y
-CONFIG_ATH79_DEV_NFC=y
-CONFIG_ATH79_DEV_SPI=y
-CONFIG_ATH79_DEV_USB=y
-CONFIG_ATH79_DEV_WMAC=y
-CONFIG_ATH79_MACH_ALFA_AP96=y
-CONFIG_ATH79_MACH_ALFA_NX=y
-CONFIG_ATH79_MACH_ALL0258N=y
-CONFIG_ATH79_MACH_ALL0315N=y
-CONFIG_ATH79_MACH_AP113=y
-CONFIG_ATH79_MACH_AP121=y
-CONFIG_ATH79_MACH_AP132=y
-CONFIG_ATH79_MACH_AP136=y
-CONFIG_ATH79_MACH_AP81=y
-CONFIG_ATH79_MACH_AP83=y
-CONFIG_ATH79_MACH_AP96=y
-CONFIG_ATH79_MACH_ARCHER_C7=y
-CONFIG_ATH79_MACH_AW_NR580=y
-CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
-CONFIG_ATH79_MACH_CAP4200AG=y
-CONFIG_ATH79_MACH_CARAMBOLA2=y
-CONFIG_ATH79_MACH_DB120=y
-CONFIG_ATH79_MACH_DHP_1565_A1=y
-CONFIG_ATH79_MACH_DIR_505_A1=y
-CONFIG_ATH79_MACH_DIR_600_A1=y
-CONFIG_ATH79_MACH_DIR_615_C1=y
-CONFIG_ATH79_MACH_DIR_825_B1=y
-CONFIG_ATH79_MACH_DIR_825_C1=y
-CONFIG_ATH79_MACH_DRAGINO2=y
-CONFIG_ATH79_MACH_EAP300V2=y
-CONFIG_ATH79_MACH_EAP7660D=y
-CONFIG_ATH79_MACH_EL_M150=y
-CONFIG_ATH79_MACH_EL_MINI=y
-CONFIG_ATH79_MACH_ESR1750=y
-CONFIG_ATH79_MACH_ESR900=y
-CONFIG_ATH79_MACH_EW_DORIN=y
-CONFIG_ATH79_MACH_GL_INET=y
-CONFIG_ATH79_MACH_GS_OOLITE=y
-CONFIG_ATH79_MACH_HIWIFI_HC6361=y
-CONFIG_ATH79_MACH_HORNET_UB=y
-CONFIG_ATH79_MACH_JA76PF=y
-CONFIG_ATH79_MACH_JWAP003=y
-CONFIG_ATH79_MACH_MR600=y
-CONFIG_ATH79_MACH_MR900=y
-CONFIG_ATH79_MACH_MYNET_N600=y
-CONFIG_ATH79_MACH_MYNET_N750=y
-CONFIG_ATH79_MACH_MYNET_REXT=y
-CONFIG_ATH79_MACH_MZK_W04NU=y
-CONFIG_ATH79_MACH_MZK_W300NH=y
-CONFIG_ATH79_MACH_NBG460N=y
-CONFIG_ATH79_MACH_NBG6716=y
-CONFIG_ATH79_MACH_OM2P=y
-CONFIG_ATH79_MACH_OM5P=y
-CONFIG_ATH79_MACH_PB42=y
-CONFIG_ATH79_MACH_PB44=y
-CONFIG_ATH79_MACH_PB92=y
-CONFIG_ATH79_MACH_QIHOO_C301=y
-# CONFIG_ATH79_MACH_RB2011 is not set
-# CONFIG_ATH79_MACH_RB4XX is not set
-# CONFIG_ATH79_MACH_RB750 is not set
-# CONFIG_ATH79_MACH_RB91X is not set
-# CONFIG_ATH79_MACH_RB95X is not set
-# CONFIG_ATH79_MACH_RBSXTLITE is not set
-CONFIG_ATH79_MACH_RW2458N=y
-CONFIG_ATH79_MACH_SMART_300=y
-CONFIG_ATH79_MACH_TEW_632BRP=y
-CONFIG_ATH79_MACH_TEW_673GRU=y
-CONFIG_ATH79_MACH_TEW_712BR=y
-CONFIG_ATH79_MACH_TEW_732BR=y
-CONFIG_ATH79_MACH_TL_MR11U=y
-CONFIG_ATH79_MACH_TL_MR13U=y
-CONFIG_ATH79_MACH_TL_MR3020=y
-CONFIG_ATH79_MACH_TL_MR3X20=y
-CONFIG_ATH79_MACH_TL_WA830RE_V2=y
-CONFIG_ATH79_MACH_TL_WA901ND=y
-CONFIG_ATH79_MACH_TL_WA901ND_V2=y
-CONFIG_ATH79_MACH_TL_WAX50RE=y
-CONFIG_ATH79_MACH_TL_WDR3500=y
-CONFIG_ATH79_MACH_TL_WDR4300=y
-CONFIG_ATH79_MACH_TL_WR1041N_V2=y
-CONFIG_ATH79_MACH_TL_WR1043ND=y
-CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
-CONFIG_ATH79_MACH_TL_WR2543N=y
-CONFIG_ATH79_MACH_TL_WR703N=y
-CONFIG_ATH79_MACH_TL_WR720N_V3=y
-CONFIG_ATH79_MACH_TL_WR741ND=y
-CONFIG_ATH79_MACH_TL_WR741ND_V4=y
-CONFIG_ATH79_MACH_TL_WR841N_V1=y
-CONFIG_ATH79_MACH_TL_WR841N_V8=y
-CONFIG_ATH79_MACH_TL_WR841N_V9=y
-CONFIG_ATH79_MACH_TL_WR941ND=y
-CONFIG_ATH79_MACH_TUBE2H=y
-CONFIG_ATH79_MACH_UBNT=y
-CONFIG_ATH79_MACH_UBNT_XM=y
-CONFIG_ATH79_MACH_WHR_HP_G300N=y
-CONFIG_ATH79_MACH_WLAE_AG300N=y
-CONFIG_ATH79_MACH_WLR8100=y
-CONFIG_ATH79_MACH_WNDAP360=y
-CONFIG_ATH79_MACH_WNDR3700=y
-CONFIG_ATH79_MACH_WNDR4300=y
-CONFIG_ATH79_MACH_WNR2000=y
-CONFIG_ATH79_MACH_WNR2000_V3=y
-CONFIG_ATH79_MACH_WNR2000_V4=y
-CONFIG_ATH79_MACH_WNR2200=y
-CONFIG_ATH79_MACH_WP543=y
-CONFIG_ATH79_MACH_WPE72=y
-CONFIG_ATH79_MACH_WRT160NL=y
-CONFIG_ATH79_MACH_WRT400N=y
-CONFIG_ATH79_MACH_WZR_450HP2=y
-CONFIG_ATH79_MACH_WZR_HP_AG300H=y
-CONFIG_ATH79_MACH_WZR_HP_G300NH=y
-CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
-CONFIG_ATH79_MACH_WZR_HP_G450H=y
-CONFIG_ATH79_MACH_ZCN_1523H=y
-CONFIG_ATH79_NVRAM=y
-CONFIG_ATH79_PCI_ATH9K_FIXUP=y
-# CONFIG_ATH79_ROUTERBOOT is not set
-CONFIG_ATH79_WDT=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-# CONFIG_GPIO_LATCH is not set
-CONFIG_GPIO_NXP_74HC153=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_WNDR3700_USB is not set
-# CONFIG_M25PXX_USE_FAST_READ is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_TPLINK_PARTS=y
-CONFIG_MTD_WRT160NL_PARTS=y
-CONFIG_MYLOADER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6063=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SOC_AR71XX=y
-CONFIG_SOC_AR724X=y
-CONFIG_SOC_AR913X=y
-CONFIG_SOC_AR933X=y
-CONFIG_SOC_AR934X=y
-CONFIG_SOC_QCA953X=y
-CONFIG_SOC_QCA955X=y
-CONFIG_SPI=y
-CONFIG_SPI_AP83=y
-CONFIG_SPI_ATH79=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_VSC7385 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-/*
- * ALFA Network AP96 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define ALFA_AP96_GPIO_PCIE_RESET 2
-#define ALFA_AP96_GPIO_SIM_DETECT 3
-#define ALFA_AP96_GPIO_MICROSD_CD 4
-#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5
-
-#define ALFA_AP96_GPIO_BUTTON_RESET 11
-
-#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL)
-
-static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ALFA_AP96_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-static int alfa_ap96_mmc_get_cd(struct device *dev)
-{
- return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD);
-}
-
-static struct mmc_spi_platform_data alfa_ap96_mmc_data = {
- .get_cd = alfa_ap96_mmc_get_cd,
- .caps = MMC_CAP_NEEDS_POLL,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct ath79_spi_controller_data ap96_spi0_cdata = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 0,
- .is_flash = true,
-};
-
-static struct ath79_spi_controller_data ap96_spi1_cdata = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 1,
-};
-
-static struct ath79_spi_controller_data ap96_spi2_cdata = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 2,
-};
-
-static struct spi_board_info alfa_ap96_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .controller_data = &ap96_spi0_cdata
- }, {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "mmc_spi",
- .platform_data = &alfa_ap96_mmc_data,
- .controller_data = &ap96_spi1_cdata
- }, {
- .bus_num = 0,
- .chip_select = 2,
- .max_speed_hz = 6250000,
- .modalias = "rtc-pcf2123",
- .controller_data = &ap96_spi2_cdata
- },
-};
-
-static struct ath79_spi_platform_data alfa_ap96_spi_data = {
- .bus_num = 0,
- .num_chipselect = 3,
-};
-
-static void __init alfa_ap96_gpio_setup(void)
-{
- ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
- gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD");
- gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD);
- gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset");
- gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1);
- gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable");
- gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1);
-}
-
-#define ALFA_AP96_WAN_PHYMASK BIT(4)
-#define ALFA_AP96_LAN_PHYMASK BIT(5)
-#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK)
-
-static void __init alfa_ap96_init(void)
-{
- alfa_ap96_gpio_setup();
-
- ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK;
- ath79_eth1_pll_data.pll_1000 = 0x110000;
-
- ath79_register_eth(0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK;
- ath79_eth1_pll_data.pll_1000 = 0x110000;
-
- ath79_register_eth(1);
-
- ath79_register_pci();
- ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info,
- ARRAY_SIZE(alfa_ap96_spi_info));
-
- ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(alfa_ap96_gpio_keys),
- alfa_ap96_gpio_keys);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96",
- alfa_ap96_init);
+++ /dev/null
-From c9da75bfa6cd7a47f5b2a1d183d34c165a06dd1a Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Thu, 22 Aug 2013 11:15:18 +0200
-Subject: [PATCH] MIPS: ath79: don't hardwire cpu_has_dsp{2} to 0
-
-The ath79 code supports various SoCs which are using either a 24Kc
-or a 74Kc core. The 74Kc core has DSP support, so don't hardwire
-the values to zero.
-
-Commit 00dc5ce2a653a332190aa29b2e1f3bceaa7d5b8d (MIPS: ath79: don't
-hardcode the unavailability of the DSP ASE) has fixed this already,
-but that change got reverted by 475032564ed96c94c085e3e7a90e07d150a7cec9
-(MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.)
-
-Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-@@ -42,8 +42,6 @@
- #define cpu_has_mips64r1 0
- #define cpu_has_mips64r2 0
-
--#define cpu_has_dsp 0
--#define cpu_has_dsp2 0
- #define cpu_has_mipsmt 0
-
- #define cpu_has_64bits 0
+++ /dev/null
-From 59a93f8909b8ab5d61e024e8b3771fdf94a774f0 Mon Sep 17 00:00:00 2001
-From: Julia Lawall <Julia.Lawall@lip6.fr>
-Date: Mon, 19 Aug 2013 10:51:56 +0200
-Subject: [PATCH] MIPS: ath79: simplify platform_get_resource_byname/devm_ioremap_resource
-
-Remove unneeded error handling on the result of a call to
-platform_get_resource_byname when the value is passed to devm_ioremap_resource.
-
-A simplified version of the semantic patch that makes this change is as
-follows: (http://coccinelle.lip6.fr/)
-
-// <smpl>
-@@
-expression pdev,res,e,e1;
-expression ret != 0;
-identifier l;
-@@
-
- res = platform_get_resource_byname(...);
-- if (res == NULL) { ... \(goto l;\|return ret;\) }
- e = devm_ioremap_resource(e1, res);
-// </smpl>
-
-Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
-Acked-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/pci/pci-ar71xx.c | 3 ---
- arch/mips/pci/pci-ar724x.c | 9 ---------
- 2 files changed, 12 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -363,9 +363,6 @@ static int ar71xx_pci_probe(struct platf
- spin_lock_init(&apc->lock);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
-- if (!res)
-- return -EINVAL;
--
- apc->cfg_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(apc->cfg_base))
- return PTR_ERR(apc->cfg_base);
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -362,25 +362,16 @@ static int ar724x_pci_probe(struct platf
- return -ENOMEM;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
-- if (!res)
-- return -EINVAL;
--
- apc->ctrl_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(apc->ctrl_base))
- return PTR_ERR(apc->ctrl_base);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
-- if (!res)
-- return -EINVAL;
--
- apc->devcfg_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(apc->devcfg_base))
- return PTR_ERR(apc->devcfg_base);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base");
-- if (!res)
-- return -EINVAL;
--
- apc->crp_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(apc->crp_base))
- return PTR_ERR(apc->crp_base);
+++ /dev/null
-From 8b7a76e72fc819753878cd5684e243f33f847c79 Mon Sep 17 00:00:00 2001
-From: Markos Chandras <markos.chandras@imgtec.com>
-Date: Wed, 21 Aug 2013 11:47:22 +0100
-Subject: [PATCH] MIPS: ath79: Avoid using unitialized 'reg' variable
-
-Fixes the following build error:
-arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used
-uninitialized in this function [-Werror=maybe-uninitialized]
-arch/mips/ath79/common.c:62:6: note: 'reg' was declared here
-In file included from arch/mips/ath79/common.c:20:0:
-arch/mips/ath79/common.c: In function 'ath79_device_reset_clear':
-arch/mips/include/asm/mach-ath79/ath79.h:139:20:
-error: 'reg' may be used uninitialized in this function
-[-Werror=maybe-uninitialized]
-arch/mips/ath79/common.c:90:6: note: 'reg' was declared here
-
-Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
-Acked-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/common.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -75,7 +75,7 @@ void ath79_device_reset_set(u32 mask)
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-- BUG();
-+ panic("Reset register not defined for this SOC");
-
- spin_lock_irqsave(&ath79_device_reset_lock, flags);
- t = ath79_reset_rr(reg);
-@@ -103,7 +103,7 @@ void ath79_device_reset_clear(u32 mask)
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-- BUG();
-+ panic("Reset register not defined for this SOC");
-
- spin_lock_irqsave(&ath79_device_reset_lock, flags);
- t = ath79_reset_rr(reg);
+++ /dev/null
-From f157945cd134e2cfa47ed9bb1f599632d112d94e Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Mon, 29 Jul 2013 19:39:20 +0200
-Subject: [PATCH] tty: ar933x_uart: convert to use devm_* functions
-
-Use devm_* functions in order to simplify cleanup
-paths.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/tty/serial/ar933x_uart.c | 26 ++++++++------------------
- 1 file changed, 8 insertions(+), 18 deletions(-)
-
---- a/drivers/tty/serial/ar933x_uart.c
-+++ b/drivers/tty/serial/ar933x_uart.c
-@@ -652,19 +652,18 @@ static int ar933x_uart_probe(struct plat
- return -EINVAL;
- }
-
-- up = kzalloc(sizeof(struct ar933x_uart_port), GFP_KERNEL);
-+ up = devm_kzalloc(&pdev->dev, sizeof(struct ar933x_uart_port),
-+ GFP_KERNEL);
- if (!up)
- return -ENOMEM;
-
- port = &up->port;
-- port->mapbase = mem_res->start;
-
-- port->membase = ioremap(mem_res->start, AR933X_UART_REGS_SIZE);
-- if (!port->membase) {
-- ret = -ENOMEM;
-- goto err_free_up;
-- }
-+ port->membase = devm_ioremap_resource(&pdev->dev, mem_res);
-+ if (IS_ERR(port->membase))
-+ return PTR_ERR(port->membase);
-
-+ port->mapbase = mem_res->start;
- port->line = id;
- port->irq = irq_res->start;
- port->dev = &pdev->dev;
-@@ -686,16 +685,10 @@ static int ar933x_uart_probe(struct plat
-
- ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
- if (ret)
-- goto err_unmap;
-+ return ret;
-
- platform_set_drvdata(pdev, up);
- return 0;
--
--err_unmap:
-- iounmap(up->port.membase);
--err_free_up:
-- kfree(up);
-- return ret;
- }
-
- static int ar933x_uart_remove(struct platform_device *pdev)
-@@ -705,11 +698,8 @@ static int ar933x_uart_remove(struct pla
- up = platform_get_drvdata(pdev);
- platform_set_drvdata(pdev, NULL);
-
-- if (up) {
-+ if (up)
- uart_remove_one_port(&ar933x_uart_driver, &up->port);
-- iounmap(up->port.membase);
-- kfree(up);
-- }
-
- return 0;
- }
+++ /dev/null
-From 7008284716403237f6bc7d7590b3ed073555bd56 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 11 Jan 2012 22:25:11 +0100
-Subject: [PATCH 34/34] spi/ath79: make chipselect logic more flexible
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/mach-ap121.c | 6 ++
- arch/mips/ath79/mach-ap136.c | 6 ++
- arch/mips/ath79/mach-ap81.c | 6 ++
- arch/mips/ath79/mach-db120.c | 6 ++
- arch/mips/ath79/mach-pb44.c | 6 ++
- arch/mips/ath79/mach-ubnt-xm.c | 6 ++
- .../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++-
- drivers/spi/spi-ath79.c | 67 +++++++++++++-------
- 8 files changed, 88 insertions(+), 23 deletions(-)
-
---- a/arch/mips/ath79/mach-ap121.c
-+++ b/arch/mips/ath79/mach-ap121.c
-@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi
- }
- };
-
-+static struct ath79_spi_controller_data ap121_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info ap121_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l1606e",
-+ .controller_data = &ap121_spi0_data,
- }
- };
-
---- a/arch/mips/ath79/mach-ap136.c
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -98,12 +98,18 @@ static struct gpio_keys_button ap136_gpi
- },
- };
-
-+static struct ath79_spi_controller_data ap136_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info ap136_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l6405d",
-+ .controller_data = &ap136_spi0_data,
- }
- };
-
---- a/arch/mips/ath79/mach-ap81.c
-+++ b/arch/mips/ath79/mach-ap81.c
-@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio
- }
- };
-
-+static struct ath79_spi_controller_data ap81_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info ap81_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
-+ .controller_data = &ap81_spi0_data,
- }
- };
-
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -76,12 +76,18 @@ static struct gpio_keys_button db120_gpi
- },
- };
-
-+static struct ath79_spi_controller_data db120_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info db120_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "s25sl064a",
-+ .controller_data = &db120_spi0_data,
- }
- };
-
---- a/arch/mips/ath79/mach-pb44.c
-+++ b/arch/mips/ath79/mach-pb44.c
-@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio
- }
- };
-
-+static struct ath79_spi_controller_data pb44_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info pb44_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
-+ .controller_data = &pb44_spi0_data,
- },
- };
-
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g
- }
- };
-
-+static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-+ .cs_line = 0,
-+};
-+
- static struct spi_board_info ubnt_xm_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l6405d",
-+ .controller_data = &ubnt_xm_spi0_data,
- }
- };
-
---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-@@ -16,8 +16,14 @@ struct ath79_spi_platform_data {
- unsigned num_chipselect;
- };
-
-+enum ath79_spi_cs_type {
-+ ATH79_SPI_CS_TYPE_INTERNAL,
-+ ATH79_SPI_CS_TYPE_GPIO,
-+};
-+
- struct ath79_spi_controller_data {
-- unsigned gpio;
-+ enum ath79_spi_cs_type cs_type;
-+ unsigned cs_line;
- };
-
- #endif /* _ATH79_SPI_PLATFORM_H */
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -35,6 +35,8 @@
- #define ATH79_SPI_RRW_DELAY_FACTOR 12000
- #define MHZ (1000 * 1000)
-
-+#define ATH79_SPI_CS_LINE_MAX 2
-+
- struct ath79_spi {
- struct spi_bitbang bitbang;
- u32 ioc_base;
-@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct
- {
- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
- int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
-+ struct ath79_spi_controller_data *cdata = spi->controller_data;
-
- if (is_active) {
- /* set initial clock polarity */
-@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
- }
-
-- if (spi->chip_select) {
-- struct ath79_spi_controller_data *cdata = spi->controller_data;
--
-- /* SPI is normally active-low */
-- gpio_set_value(cdata->gpio, cs_high);
-- } else {
-+ switch (cdata->cs_type) {
-+ case ATH79_SPI_CS_TYPE_INTERNAL:
- if (cs_high)
-- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
-+ sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line);
- else
-- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
-+ sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line);
-
- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
-- }
-+ break;
-
-+ case ATH79_SPI_CS_TYPE_GPIO:
-+ /* SPI is normally active-low */
-+ if (gpio_cansleep(cdata->cs_line))
-+ gpio_set_value_cansleep(cdata->cs_line, cs_high);
-+ else
-+ gpio_set_value(cdata->cs_line, cs_high);
-+ break;
-+ }
- }
-
- static void ath79_spi_enable(struct ath79_spi *sp)
-@@ -120,24 +127,30 @@ static void ath79_spi_disable(struct ath
- static int ath79_spi_setup_cs(struct spi_device *spi)
- {
- struct ath79_spi_controller_data *cdata;
-+ unsigned long flags;
- int status;
-
- cdata = spi->controller_data;
-- if (spi->chip_select && !cdata)
-+ if (!cdata)
- return -EINVAL;
-
- status = 0;
-- if (spi->chip_select) {
-- unsigned long flags;
-+ switch (cdata->cs_type) {
-+ case ATH79_SPI_CS_TYPE_INTERNAL:
-+ if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX)
-+ status = -EINVAL;
-+ break;
-
-+ case ATH79_SPI_CS_TYPE_GPIO:
- flags = GPIOF_DIR_OUT;
- if (spi->mode & SPI_CS_HIGH)
- flags |= GPIOF_INIT_LOW;
- else
- flags |= GPIOF_INIT_HIGH;
-
-- status = gpio_request_one(cdata->gpio, flags,
-+ status = gpio_request_one(cdata->cs_line, flags,
- dev_name(&spi->dev));
-+ break;
- }
-
- return status;
-@@ -145,9 +158,19 @@ static int ath79_spi_setup_cs(struct spi
-
- static void ath79_spi_cleanup_cs(struct spi_device *spi)
- {
-- if (spi->chip_select) {
-- struct ath79_spi_controller_data *cdata = spi->controller_data;
-- gpio_free(cdata->gpio);
-+ struct ath79_spi_controller_data *cdata;
-+
-+ cdata = spi->controller_data;
-+ if (!cdata)
-+ return;
-+
-+ switch (cdata->cs_type) {
-+ case ATH79_SPI_CS_TYPE_INTERNAL:
-+ /* nothing to do */
-+ break;
-+ case ATH79_SPI_CS_TYPE_GPIO:
-+ gpio_free(cdata->cs_line);
-+ break;
- }
- }
-
-@@ -155,6 +178,9 @@ static int ath79_spi_setup(struct spi_de
- {
- int status = 0;
-
-+ if (spi->controller_data == NULL)
-+ return -EINVAL;
-+
- if (spi->bits_per_word > 32)
- return -EINVAL;
-
-@@ -215,6 +241,10 @@ static int ath79_spi_probe(struct platfo
- unsigned long rate;
- int ret;
-
-+ pdata = pdev->dev.platform_data;
-+ if (!pdata)
-+ return -EINVAL;
-+
- master = spi_alloc_master(&pdev->dev, sizeof(*sp));
- if (master == NULL) {
- dev_err(&pdev->dev, "failed to allocate spi master\n");
-@@ -224,14 +254,10 @@ static int ath79_spi_probe(struct platfo
- sp = spi_master_get_devdata(master);
- platform_set_drvdata(pdev, sp);
-
-- pdata = pdev->dev.platform_data;
--
- master->setup = ath79_spi_setup;
- master->cleanup = ath79_spi_cleanup;
-- if (pdata) {
-- master->bus_num = pdata->bus_num;
-- master->num_chipselect = pdata->num_chipselect;
-- }
-+ master->bus_num = pdata->bus_num;
-+ master->num_chipselect = pdata->num_chipselect;
-
- sp->bitbang.master = spi_master_get(master);
- sp->bitbang.chipselect = ath79_spi_chipselect;
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -62,10 +62,27 @@ static void __init ar913x_wmac_setup(voi
-
- static int ar933x_wmac_reset(void)
- {
-+ int retries = 20;
-+
- ath79_device_reset_set(AR933X_RESET_WMAC);
- ath79_device_reset_clear(AR933X_RESET_WMAC);
-
-- return 0;
-+ while (1) {
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-+ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
-+ return 0;
-+
-+ if (retries-- == 0)
-+ break;
-+
-+ udelay(10000);
-+ retries++;
-+ }
-+
-+ pr_err("ar933x: WMAC reset timed out");
-+ return -ETIMEDOUT;
- }
-
- static int ar933x_r1_get_wmac_revision(void)
+++ /dev/null
---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-@@ -36,6 +36,7 @@
- #define cpu_has_mdmx 0
- #define cpu_has_mips3d 0
- #define cpu_has_smartmips 0
-+#define cpu_has_rixi 0
-
- #define cpu_has_mips32r1 1
- #define cpu_has_mips32r2 1
-@@ -43,6 +44,7 @@
- #define cpu_has_mips64r2 0
-
- #define cpu_has_mipsmt 0
-+#define cpu_has_userlocal 0
-
- #define cpu_has_64bits 0
- #define cpu_has_64bit_zero_reg 0
-@@ -51,5 +53,9 @@
-
- #define cpu_dcache_line_size() 32
- #define cpu_icache_line_size() 32
-+#define cpu_has_vtag_icache 0
-+#define cpu_has_dc_aliases 1
-+#define cpu_has_ic_fills_f_dc 0
-+#define cpu_has_pindexed_dcache 0
-
- #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */
+++ /dev/null
---- a/arch/mips/include/asm/mips_machine.h
-+++ b/arch/mips/include/asm/mips_machine.h
-@@ -36,6 +36,18 @@ static struct mips_machine machine_##_ty
- .mach_setup = _setup, \
- };
-
-+#define MIPS_MACHINE_NONAME(_type, _id, _setup) \
-+static const char machine_id_##_type[] __initconst \
-+ __aligned(1) = _id; \
-+static struct mips_machine machine_##_type \
-+ __used __section(.mips.machines.init) = \
-+{ \
-+ .mach_type = _type, \
-+ .mach_id = machine_id_##_type, \
-+ .mach_name = NULL, \
-+ .mach_setup = _setup, \
-+};
-+
- extern long __mips_machines_start;
- extern long __mips_machines_end;
-
+++ /dev/null
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -197,6 +197,9 @@ config LZMA_COMPRESS
- config LZMA_DECOMPRESS
- tristate
-
-+config RLE_DECOMPRESS
-+ tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -90,6 +90,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
- obj-$(CONFIG_LZMA_COMPRESS) += lzma/
- obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
-+obj-$(CONFIG_RLE_DECOMPRESS) += rle.o
-
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/include/linux/rle.h
-@@ -0,0 +1,18 @@
-+#ifndef _RLE_H_
-+#define _RLE_H_
-+
-+#ifdef CONFIG_RLE_DECOMPRESS
-+int rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done);
-+#else
-+static inline int
-+rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done)
-+{
-+ return -ENOTSUPP;
-+}
-+#endif /* CONFIG_RLE_DECOMPRESS */
-+
-+#endif /* _RLE_H_ */
---- /dev/null
-+++ b/lib/rle.c
-@@ -0,0 +1,78 @@
-+/*
-+ * RLE decoding routine
-+ *
-+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/rle.h>
-+
-+int rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done)
-+{
-+ size_t srcpos, dstpos;
-+ int ret;
-+
-+ srcpos = 0;
-+ dstpos = 0;
-+ ret = -EINVAL;
-+
-+ /* sanity checks */
-+ if (!src || !srclen || !dst || !dstlen)
-+ goto out;
-+
-+ while (1) {
-+ char count;
-+
-+ if (srcpos >= srclen)
-+ break;
-+
-+ count = (char) src[srcpos++];
-+ if (count == 0) {
-+ ret = 0;
-+ break;
-+ }
-+
-+ if (count > 0) {
-+ unsigned char c;
-+
-+ if (srcpos >= srclen)
-+ break;
-+
-+ c = src[srcpos++];
-+
-+ while (count--) {
-+ if (dstpos >= dstlen)
-+ break;
-+
-+ dst[dstpos++] = c;
-+ }
-+ } else {
-+ count *= -1;
-+
-+ while (count--) {
-+ if (srcpos >= srclen)
-+ break;
-+ if (dstpos >= dstlen)
-+ break;
-+ dst[dstpos++] = src[srcpos++];
-+ }
-+ }
-+ }
-+
-+out:
-+ if (src_done)
-+ *src_done = srcpos;
-+ if (dst_done)
-+ *dst_done = dstpos;
-+
-+ return ret;
-+}
-+
-+EXPORT_SYMBOL_GPL(rle_decode);
+++ /dev/null
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -31,6 +31,66 @@ struct physmap_flash_info {
- int vpp_refcnt;
- };
-
-+static struct platform_device *physmap_map2pdev(struct map_info *map)
-+{
-+ return (struct platform_device *) map->map_priv_1;
-+}
-+
-+static void physmap_lock(struct map_info *map)
-+{
-+ struct platform_device *pdev;
-+ struct physmap_flash_data *physmap_data;
-+
-+ pdev = physmap_map2pdev(map);
-+ physmap_data = pdev->dev.platform_data;
-+ physmap_data->lock(pdev);
-+}
-+
-+static void physmap_unlock(struct map_info *map)
-+{
-+ struct platform_device *pdev;
-+ struct physmap_flash_data *physmap_data;
-+
-+ pdev = physmap_map2pdev(map);
-+ physmap_data = pdev->dev.platform_data;
-+ physmap_data->unlock(pdev);
-+}
-+
-+static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
-+{
-+ map_word ret;
-+
-+ physmap_lock(map);
-+ ret = inline_map_read(map, ofs);
-+ physmap_unlock(map);
-+
-+ return ret;
-+}
-+
-+static void physmap_flash_write_lock(struct map_info *map, map_word d,
-+ unsigned long ofs)
-+{
-+ physmap_lock(map);
-+ inline_map_write(map, d, ofs);
-+ physmap_unlock(map);
-+}
-+
-+static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
-+ unsigned long from, ssize_t len)
-+{
-+ physmap_lock(map);
-+ inline_map_copy_from(map, to, from, len);
-+ physmap_unlock(map);
-+}
-+
-+static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
-+ const void *from, ssize_t len)
-+{
-+ physmap_lock(map);
-+ inline_map_copy_to(map, to, from, len);
-+ physmap_unlock(map);
-+}
-+
- static int physmap_flash_remove(struct platform_device *dev)
- {
- struct physmap_flash_info *info;
-@@ -154,6 +214,13 @@ static int physmap_flash_probe(struct pl
-
- simple_map_init(&info->map[i]);
-
-+ if (physmap_data->lock && physmap_data->unlock) {
-+ info->map[i].read = physmap_flash_read_lock;
-+ info->map[i].write = physmap_flash_write_lock;
-+ info->map[i].copy_from = physmap_flash_copy_from_lock;
-+ info->map[i].copy_to = physmap_flash_copy_to_lock;
-+ }
-+
- probe_type = rom_probe_types;
- if (physmap_data->probe_type == NULL) {
- for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
---- a/include/linux/mtd/physmap.h
-+++ b/include/linux/mtd/physmap.h
-@@ -25,6 +25,8 @@ struct physmap_flash_data {
- unsigned int width;
- int (*init)(struct platform_device *);
- void (*exit)(struct platform_device *);
-+ void (*lock)(struct platform_device *);
-+ void (*unlock)(struct platform_device *);
- void (*set_vpp)(struct platform_device *, int);
- unsigned int nr_parts;
- unsigned int pfow_base;
+++ /dev/null
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -148,6 +148,7 @@
- #define SST39LF160 0x2782
- #define SST39VF1601 0x234b
- #define SST39VF3201 0x235b
-+#define SST39VF6401B 0x236d
- #define SST39WF1601 0x274b
- #define SST39WF1602 0x274a
- #define SST39LF512 0x00D4
-@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
- ERASEINFO(0x10000,64),
- }
- }, {
-+ .mfr_id = CFI_MFR_SST,
-+ .dev_id = SST39VF6401B,
-+ .name = "SST 39VF6401B",
-+ .devtypes = CFI_DEVICETYPE_X16,
-+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
-+ .dev_size = SIZE_8MiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x10000,128)
-+ }
-+ }, {
- .mfr_id = CFI_MFR_ST,
- .dev_id = M29F800AB,
- .name = "ST M29F800AB",
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1306,8 +1306,8 @@ static int __xipram do_write_oneword(str
- break;
- }
-
-- if (chip_ready(map, adr))
-- break;
-+ if (chip_good(map, adr, datum))
-+ goto enable_xip;
-
- /* Latency issues. Drop the lock, wait a while and retry */
- UDELAY(map, chip, adr, 1);
-@@ -1323,6 +1323,8 @@ static int __xipram do_write_oneword(str
-
- ret = -EIO;
- }
-+
-+ enable_xip:
- xip_enable(map, chip, adr);
- op_done:
- chip->state = FL_READY;
-@@ -1893,7 +1895,6 @@ static int cfi_amdstd_panic_write(struct
- return 0;
- }
-
--
- /*
- * Handle devices with one erase region, that only implement
- * the chip erase command.
-@@ -1957,8 +1958,8 @@ static int __xipram do_erase_chip(struct
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr))
-- break;
-+ if (chip_good(map, adr, map_word_ff(map)))
-+ goto op_done;
-
- if (time_after(jiffies, timeo)) {
- printk(KERN_WARNING "MTD %s(): software timeout\n",
-@@ -1978,6 +1979,7 @@ static int __xipram do_erase_chip(struct
- ret = -EIO;
- }
-
-+ op_done:
- chip->state = FL_READY;
- xip_enable(map, chip, adr);
- DISABLE_VPP(map);
-@@ -2046,9 +2048,9 @@ static int __xipram do_erase_oneblock(st
- chip->erase_suspended = 0;
- }
-
-- if (chip_ready(map, adr)) {
-+ if (chip_good(map, adr, map_word_ff(map))) {
- xip_enable(map, chip, adr);
-- break;
-+ goto op_done;
- }
-
- if (time_after(jiffies, timeo)) {
-@@ -2070,6 +2072,7 @@ static int __xipram do_erase_oneblock(st
- ret = -EIO;
- }
-
-+ op_done:
- chip->state = FL_READY;
- DISABLE_VPP(map);
- put_chip(map, chip, adr);
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -212,6 +212,12 @@ config MTD_BCM47XX_PARTS
- This provides partitions parser for devices based on BCM47xx
- boards.
-
-+config MTD_WRT160NL_PARTS
-+ tristate "Linksys WRT160NL partitioning support"
-+ depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
-+ ---help---
-+ Linksys WRT160NL partitioning support
-+
- config MTD_MYLOADER_PARTS
- tristate "MyLoader partition parsing"
- depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -214,7 +214,7 @@ config MTD_BCM47XX_PARTS
-
- config MTD_WRT160NL_PARTS
- tristate "Linksys WRT160NL partitioning support"
-- depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
-+ depends on ATH79_MACH_WRT160NL
- ---help---
- Linksys WRT160NL partitioning support
-
-@@ -234,6 +234,12 @@ config MTD_MYLOADER_PARTS
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically.
-
-+config MTD_TPLINK_PARTS
-+ tristate "TP-Link AR7XXX/AR9XXX partitioning support"
-+ depends on ATH79
-+ ---help---
-+ TBD.
-+
- comment "User Modules And Translation Layers"
-
- config MTD_BLKDEVS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
- obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
-
- # 'Users' - code which presents functionality to userspace.
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -93,6 +93,7 @@ struct m25p {
- u8 erase_opcode;
- u8 *command;
- bool fast_read;
-+ size_t max_read_len;
- };
-
- static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-@@ -344,6 +345,7 @@ static int m25p80_read(struct mtd_info *
- struct spi_transfer t[2];
- struct spi_message m;
- uint8_t opcode;
-+ loff_t ofs;
-
- pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
- __func__, (u32)from, len);
-@@ -359,19 +361,10 @@ static int m25p80_read(struct mtd_info *
- t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
- spi_message_add_tail(&t[0], &m);
-
-- t[1].rx_buf = buf;
-- t[1].len = len;
- spi_message_add_tail(&t[1], &m);
-
- mutex_lock(&flash->lock);
-
-- /* Wait till previous write/erase is done. */
-- if (wait_till_ready(flash)) {
-- /* REVISIT status return?? */
-- mutex_unlock(&flash->lock);
-- return 1;
-- }
--
- /* FIXME switch to OPCODE_FAST_READ. It's required for higher
- * clocks; and at this writing, every chip this driver handles
- * supports that opcode.
-@@ -380,13 +373,43 @@ static int m25p80_read(struct mtd_info *
- /* Set up the write data buffer. */
- opcode = flash->fast_read ? OPCODE_FAST_READ : OPCODE_NORM_READ;
- flash->command[0] = opcode;
-- m25p_addr2cmd(flash, from, flash->command);
-+ ofs = 0;
-+ while (len) {
-+ size_t readlen;
-+ size_t done;
-+ int ret;
-+
-+ ret = wait_till_ready(flash);
-+ if (ret) {
-+ mutex_unlock(&flash->lock);
-+ return 1;
-+ }
-+
-+ if (flash->max_read_len > 0 &&
-+ flash->max_read_len < len)
-+ readlen = flash->max_read_len;
-+ else
-+ readlen = len;
-+
-+ t[1].rx_buf = buf + ofs;
-+ t[1].len = readlen;
-+
-+ m25p_addr2cmd(flash, from + ofs, flash->command);
-+
-+ spi_sync(flash->spi, &m);
-
-- spi_sync(flash->spi, &m);
-+ done = m.actual_length - m25p_cmdsz(flash) -
-+ (flash->fast_read ? 1 : 0);
-+ if (done != readlen) {
-+ mutex_unlock(&flash->lock);
-+ return 1;
-+ }
-
-- *retlen = m.actual_length - m25p_cmdsz(flash) -
-- (flash->fast_read ? 1 : 0);
-+ ofs += done;
-+ len -= done;
-+ }
-
-+ *retlen = ofs;
- mutex_unlock(&flash->lock);
-
- return 0;
-@@ -1022,6 +1045,12 @@ static int m25p_probe(struct spi_device
- flash->mtd._unlock = m25p80_unlock;
- }
-
-+ if (data && data->max_read_len) {
-+ flash->max_read_len = data->max_read_len;
-+ dev_warn(&spi->dev, "max_read_len set to %d bytes\n",
-+ flash->max_read_len);
-+ }
-+
- /* sst flash chips use AAI word program */
- if (info->flags & SST_WRITE)
- flash->mtd._write = sst_write;
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -25,6 +25,7 @@ struct flash_platform_data {
-
- char *type;
-
-+ size_t max_read_len;
- /* we'll likely add more ... use JEDEC IDs, etc */
- };
-
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -1122,7 +1122,9 @@ static int m25p_probe(struct spi_device
- /* partitions should match sector boundaries; and it may be good to
- * use readonly partitions for writeprotected sectors (BP2..BP0).
- */
-- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
-+ return mtd_device_parse_register(&flash->mtd,
-+ data ? data->part_probes : NULL,
-+ &ppdata,
- data ? data->parts : NULL,
- data ? data->nr_parts : 0);
- }
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -24,6 +24,7 @@ struct flash_platform_data {
- unsigned int nr_parts;
-
- char *type;
-+ const char **part_probes;
-
- size_t max_read_len;
- /* we'll likely add more ... use JEDEC IDs, etc */
+++ /dev/null
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
- while (mtd_block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
-@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
-
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -544,4 +544,8 @@ config MTD_NAND_XWAY
- Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
- to the External Bus Unit (EBU).
-
-+config MTD_NAND_RB4XX
-+ tristate "NAND flash driver for RouterBoard 4xx series"
-+ depends on MTD_NAND && ATH79_MACH_RB4XX
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -548,4 +548,8 @@ config MTD_NAND_RB4XX
- tristate "NAND flash driver for RouterBoard 4xx series"
- depends on MTD_NAND && ATH79_MACH_RB4XX
-
-+config MTD_NAND_RB750
-+ tristate "NAND flash driver for the RouterBoard 750"
-+ depends on MTD_NAND && ATH79_MACH_RB750
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
-+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -41,7 +41,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_WORD_RETRIES 3
-
-@@ -52,7 +52,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd)
- {
- struct map_info *map = mtd->priv;
-@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(stru
- mtd->_write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1463,6 +1467,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1587,7 +1592,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -1662,6 +1666,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /*
- * Wait for the flash chip to become ready to write data
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -1072,6 +1072,7 @@ static int m25p_probe(struct spi_device
- if (info->flags & M25P_NO_ERASE)
- flash->mtd.flags |= MTD_NO_ERASE;
-
-+ memset(&ppdata, '\0', sizeof(ppdata));
- ppdata.of_node = spi->dev.of_node;
- flash->mtd.dev.parent = &spi->dev;
- flash->page_size = info->page_size;
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -552,4 +552,12 @@ config MTD_NAND_RB750
- tristate "NAND flash driver for the RouterBoard 750"
- depends on MTD_NAND && ATH79_MACH_RB750
-
-+config MTD_NAND_AR934X
-+ tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
-+ depends on (SOC_AR934X || SOC_QCA955X)
-+
-+config MTD_NAND_AR934X_HW_ECC
-+ bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)"
-+ depends on MTD_NAND_AR934X
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-
- obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
- obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o
- obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o
-+obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o
- obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
- obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
- obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -552,6 +552,10 @@ config MTD_NAND_RB750
- tristate "NAND flash driver for the RouterBoard 750"
- depends on MTD_NAND && ATH79_MACH_RB750
-
-+config MTD_NAND_RB91X
-+ tristate "NAND flash driver for the RouterBOARD 91x series"
-+ depends on MTD_NAND && ATH79_MACH_RB91X
-+
- config MTD_NAND_AR934X
- tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
- depends on (SOC_AR934X || SOC_QCA955X)
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nan
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
-+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
+++ /dev/null
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -5,7 +5,7 @@
- config NET_VENDOR_ATHEROS
- bool "Atheros devices"
- default y
-- depends on PCI
-+ depends on (PCI || ATH79)
- ---help---
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
-@@ -85,4 +85,6 @@ config ALX
- To compile this driver as a module, choose M here. The module
- will be called alx.
-
-+source drivers/net/ethernet/atheros/ag71xx/Kconfig
-+
- endif # NET_VENDOR_ATHEROS
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -2,6 +2,7 @@
- # Makefile for the Atheros network device drivers.
- #
-
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_ATL1) += atlx/
- obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
+++ /dev/null
---- a/net/dsa/tag_trailer.c
-+++ b/net/dsa/tag_trailer.c
-@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
-
- trailer = skb_tail_pointer(skb) - 4;
- if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
-- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
-+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
- goto out_drop;
-
- source_port = trailer[1] & 7;
+++ /dev/null
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -13,6 +13,13 @@ config NET_DSA_MV88E6060
- This enables support for the Marvell 88E6060 ethernet switch
- chip.
-
-+config NET_DSA_MV88E6063
-+ bool "Marvell 88E6063 ethernet switch chip support"
-+ select NET_DSA_TAG_TRAILER
-+ ---help---
-+ This enables support for the Marvell 88E6063 ethernet switch
-+ chip
-+
- config NET_DSA_MV88E6XXX_NEED_PPU
- bool
- default n
---- a/drivers/net/dsa/Makefile
-+++ b/drivers/net/dsa/Makefile
-@@ -1,4 +1,5 @@
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
- obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
- mv88e6xxx_drv-y += mv88e6xxx.o
- ifdef CONFIG_NET_DSA_MV88E6123_61_65
+++ /dev/null
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -1009,6 +1009,12 @@ static int phy_read_mmd_indirect(struct
- return ret;
- }
-
-+int phy_read_mmd(struct phy_device *phydev, int prtad, int devad, int addr)
-+{
-+ return phy_read_mmd_indirect(phydev->bus, prtad, devad, phydev->addr);
-+}
-+EXPORT_SYMBOL(phy_read_mmd);
-+
- /**
- * phy_write_mmd_indirect - writes data to the MMD registers
- * @bus: the target MII bus
-@@ -1034,6 +1040,12 @@ static void phy_write_mmd_indirect(struc
- bus->write(bus, addr, MII_MMD_DATA, data);
- }
-
-+void phy_write_mmd(struct phy_device *phydev, int prtad, int devad, u16 data)
-+{
-+ phy_write_mmd_indirect(phydev->bus, prtad, devad, phydev->addr, data);
-+}
-+EXPORT_SYMBOL(phy_write_mmd);
-+
- /**
- * phy_init_eee - init and check the EEE feature
- * @phydev: target phy_device struct
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -580,6 +580,9 @@ int phy_register_fixup_for_uid(u32 phy_u
- int (*run)(struct phy_device *));
- int phy_scan_fixups(struct phy_device *phydev);
-
-+int phy_read_mmd(struct phy_device *phydev, int prtad, int devad, int addr);
-+void phy_write_mmd(struct phy_device *phydev, int prtad, int devad, u16 data);
-+
- int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
- int phy_get_eee_err(struct phy_device *phydev);
- int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);
+++ /dev/null
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -12,10 +12,12 @@
- */
-
- #include <linux/phy.h>
-+#include <linux/mdio.h>
- #include <linux/module.h>
- #include <linux/string.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
-+#include <linux/platform_data/phy-at803x.h>
-
- #define AT803X_INTR_ENABLE 0x12
- #define AT803X_INTR_STATUS 0x13
-@@ -28,10 +30,61 @@
- #define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
- #define AT803X_FUNC_DATA 0x4003
-
-+#define AT803X_PCS_SMART_EEE_CTRL3 0x805D
-+
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT 12
-+#define AT803X_SMART_EEE_CTRL3_LPI_EN BIT(8)
-+
-+#define AT803X_DEBUG_PORT_ACCESS_OFFSET 0x1D
-+#define AT803X_DEBUG_PORT_ACCESS_DATA 0x1E
-+
-+#define AT803X_DBG0_REG 0x00
-+#define AT803X_DBG0_RGMII_RX_CLK_DELAY_EN BIT(8)
-+
-+#define AT803X_DBG5_REG 0x05
-+#define AT803X_DBG5_RGMII_TX_CLK_DELAY_EN BIT(8)
-+
- MODULE_DESCRIPTION("Atheros 803x PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
-
-+static u16
-+at803x_dbg_reg_rmw(struct phy_device *phydev, u16 reg, u16 clear, u16 set)
-+{
-+ struct mii_bus *bus = phydev->bus;
-+ int val;
-+
-+ mutex_lock(&bus->mdio_lock);
-+
-+ bus->write(bus, phydev->addr, AT803X_DEBUG_PORT_ACCESS_OFFSET, reg);
-+ val = bus->read(bus, phydev->addr, AT803X_DEBUG_PORT_ACCESS_DATA);
-+ if (val < 0) {
-+ val = 0xffff;
-+ goto out;
-+ }
-+
-+ val &= ~clear;
-+ val |= set;
-+ bus->write(bus, phydev->addr, AT803X_DEBUG_PORT_ACCESS_DATA, val);
-+
-+out:
-+ mutex_unlock(&bus->mdio_lock);
-+ return val;
-+}
-+
-+static inline void
-+at803x_dbg_reg_set(struct phy_device *phydev, u16 reg, u16 set)
-+{
-+ at803x_dbg_reg_rmw(phydev, reg, 0, set);
-+}
-+
-+static inline void
-+at803x_dbg_reg_clr(struct phy_device *phydev, u16 reg, u16 clear)
-+{
-+ at803x_dbg_reg_rmw(phydev, reg, clear, 0);
-+}
-+
- static void at803x_set_wol_mac_addr(struct phy_device *phydev)
- {
- struct net_device *ndev = phydev->attached_dev;
-@@ -62,8 +115,16 @@ static void at803x_set_wol_mac_addr(stru
- }
- }
-
-+static void at803x_disable_smarteee(struct phy_device *phydev)
-+{
-+ phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
-+ 1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
-+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
-+}
-+
- static int at803x_config_init(struct phy_device *phydev)
- {
-+ struct at803x_platform_data *pdata;
- int val;
- u32 features;
- int status;
-@@ -105,6 +166,26 @@ static int at803x_config_init(struct phy
- status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE);
- status = phy_read(phydev, AT803X_INTR_STATUS);
-
-+ pdata = dev_get_platdata(&phydev->dev);
-+ if (pdata) {
-+ if (pdata->disable_smarteee)
-+ at803x_disable_smarteee(phydev);
-+
-+ if (pdata->enable_rgmii_rx_delay)
-+ at803x_dbg_reg_set(phydev, AT803X_DBG0_REG,
-+ AT803X_DBG0_RGMII_RX_CLK_DELAY_EN);
-+ else
-+ at803x_dbg_reg_clr(phydev, AT803X_DBG0_REG,
-+ AT803X_DBG0_RGMII_RX_CLK_DELAY_EN);
-+
-+ if (pdata->enable_rgmii_tx_delay)
-+ at803x_dbg_reg_set(phydev, AT803X_DBG5_REG,
-+ AT803X_DBG5_RGMII_TX_CLK_DELAY_EN);
-+ else
-+ at803x_dbg_reg_clr(phydev, AT803X_DBG5_REG,
-+ AT803X_DBG5_RGMII_TX_CLK_DELAY_EN);
-+ }
-+
- return 0;
- }
-
---- /dev/null
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -0,0 +1,10 @@
-+#ifndef _PHY_AT803X_PDATA_H
-+#define _PHY_AT803X_PDATA_H
-+
-+struct at803x_platform_data {
-+ int disable_smarteee:1;
-+ int enable_rgmii_tx_delay:1;
-+ int enable_rgmii_rx_delay:1;
-+};
-+
-+#endif /* _PHY_AT803X_PDATA_H */
+++ /dev/null
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -62,8 +62,8 @@ obj-$(CONFIG_IDE) += ide/
- obj-$(CONFIG_SCSI) += scsi/
- obj-$(CONFIG_ATA) += ata/
- obj-$(CONFIG_TARGET_CORE) += target/
--obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPI) += spi/
-+obj-$(CONFIG_MTD) += mtd/
- obj-y += hsi/
- obj-y += net/
- obj-$(CONFIG_ATM) += atm/
+++ /dev/null
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -519,6 +519,8 @@ struct spi_transfer {
- dma_addr_t rx_dma;
-
- unsigned cs_change:1;
-+ unsigned verify:1;
-+ unsigned fast_write:1;
- u8 bits_per_word;
- u16 delay_usecs;
- u32 speed_hz;
-@@ -560,6 +562,7 @@ struct spi_message {
- struct spi_device *spi;
-
- unsigned is_dma_mapped:1;
-+ unsigned fast_read:1;
-
- /* REVISIT: we might want a flag affecting the behavior of the
- * last transfer ... allowing things like "read 16 bit length L"
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -354,6 +354,12 @@ config SPI_RSPI
- help
- SPI driver for Renesas RSPI blocks.
-
-+config SPI_RB4XX
-+ tristate "Mikrotik RB4XX SPI master"
-+ depends on SPI_MASTER && ATH79_MACH_RB4XX
-+ help
-+ SPI controller driver for the Mikrotik RB4xx series boards.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -55,6 +55,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
- spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
-+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
- obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -546,6 +546,13 @@ config SPI_TLE62X0
- sysfs interface, with each line presented as a kind of GPIO
- exposing both switch control and diagnostic feedback.
-
-+config SPI_RB4XX_CPLD
-+ tristate "MikroTik RB4XX CPLD driver"
-+ depends on ATH79_MACH_RB4XX
-+ help
-+ SPI driver for the Xilinx CPLD chip present on the
-+ MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -56,6 +56,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
-+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o
- obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
+++ /dev/null
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV) += spidev.o
- # SPI master controller drivers (bus)
- obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
- obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
-+obj-$(CONFIG_SPI_AP83) += spi-ap83.o
- obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
- obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
- obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -60,6 +60,14 @@ config SPI_ALTERA
- help
- This is the driver for the Altera SPI Controller.
-
-+config SPI_AP83
-+ tristate "Atheros AP83 specific SPI Controller"
-+ depends on SPI_MASTER && ATH79_MACH_AP83
-+ select SPI_BITBANG
-+ help
-+ This is a specific SPI controller driver for the Atheros AP83
-+ reference board.
-+
- config SPI_ATH79
- tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
- depends on ATH79 && GPIOLIB
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -561,6 +561,11 @@ config SPI_RB4XX_CPLD
- SPI driver for the Xilinx CPLD chip present on the
- MikroTik RB4xx boards.
-
-+config SPI_VSC7385
-+ tristate "Vitesse VSC7385 ethernet switch driver"
-+ help
-+ SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -76,5 +76,6 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.
- obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
- obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
- obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
-+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o
- obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
- obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
+++ /dev/null
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -479,6 +479,13 @@ config LEDS_BLINKM
- This option enables support for the BlinkM RGB LED connected
- through I2C. Say Y to enable support for the BlinkM LED.
-
-+config LEDS_WNDR3700_USB
-+ tristate "NETGEAR WNDR3700 USB LED driver"
-+ depends on LEDS_CLASS && ATH79_MACH_WNDR3700
-+ help
-+ This option enables support for the USB LED found on the
-+ NETGEAR WNDR3700 board.
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_LEDS_DA9052) += leds-da905
- obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
-+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
- obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
- obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
- obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
+++ /dev/null
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -486,6 +486,10 @@ config LEDS_WNDR3700_USB
- This option enables support for the USB LED found on the
- NETGEAR WNDR3700 board.
-
-+config LEDS_RB750
-+ tristate "LED driver for the Mikrotik RouterBOARD 750"
-+ depends on LEDS_CLASS && ATH79_MACH_RB750
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -47,6 +47,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359
- obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
- obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
- obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
-+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
- obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
- obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
- obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
+++ /dev/null
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -717,4 +717,12 @@ config GPIO_VIPERBOARD
- River Tech's viperboard.h for detailed meaning
- of the module parameters.
-
-+comment "Other GPIO expanders"
-+
-+config GPIO_NXP_74HC153
-+ tristate "NXP 74HC153 Dual 4-input multiplexer"
-+ help
-+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
-+ provides a GPIO interface supporting input mode only.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2
- obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
- obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
- obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
-+obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o
- obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o
- obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
- obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
+++ /dev/null
---- a/drivers/gpio/gpio-74x164.c
-+++ b/drivers/gpio/gpio-74x164.c
-@@ -109,10 +109,14 @@ static int gen_74x164_probe(struct spi_d
- {
- struct gen_74x164_chip *chip;
- struct gen_74x164_chip_platform_data *pdata;
-+ struct device_node *np;
- int ret;
-
-- if (!spi->dev.of_node) {
-- dev_err(&spi->dev, "No device tree data available.\n");
-+ pdata = spi->dev.platform_data;
-+ np = spi->dev.of_node;
-+
-+ if (!np && !pdata) {
-+ dev_err(&spi->dev, "No configuration data available.\n");
- return -EINVAL;
- }
-
-@@ -129,7 +133,6 @@ static int gen_74x164_probe(struct spi_d
- if (!chip)
- return -ENOMEM;
-
-- pdata = spi->dev.platform_data;
- if (pdata && pdata->base)
- chip->gpio_chip.base = pdata->base;
- else
-@@ -146,12 +149,19 @@ static int gen_74x164_probe(struct spi_d
- chip->gpio_chip.get = gen_74x164_get_value;
- chip->gpio_chip.set = gen_74x164_set_value;
-
-- if (of_property_read_u32(spi->dev.of_node, "registers-number", &chip->registers)) {
-- dev_err(&spi->dev, "Missing registers-number property in the DT.\n");
-- ret = -EINVAL;
-- goto exit_destroy;
-+ if (np) {
-+ if (of_property_read_u32(spi->dev.of_node, "registers-number", &chip->registers)) {
-+ dev_err(&spi->dev, "Missing registers-number property in the DT.\n");
-+ ret = -EINVAL;
-+ goto exit_destroy;
-+ }
-+ } else if (pdata) {
-+ chip->registers = pdata->num_registers;
- }
-
-+ if (!chip->registers)
-+ chip->registers = 1;
-+
- chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
- chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL);
- if (!chip->buffer) {
-@@ -159,6 +169,9 @@ static int gen_74x164_probe(struct spi_d
- goto exit_destroy;
- }
-
-+ if (pdata && pdata->init_data)
-+ memcpy(chip->buffer, pdata->init_data, chip->registers);
-+
- chip->gpio_chip.can_sleep = 1;
- chip->gpio_chip.dev = &spi->dev;
- chip->gpio_chip.owner = THIS_MODULE;
---- a/include/linux/spi/74x164.h
-+++ b/include/linux/spi/74x164.h
-@@ -4,6 +4,10 @@
- struct gen_74x164_chip_platform_data {
- /* number assigned to the first GPIO */
- unsigned base;
-+ /* number of chained registers */
-+ unsigned num_registers;
-+ /* address of a buffer containing initial data */
-+ u8 *init_data;
- };
-
- #endif
+++ /dev/null
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -725,4 +725,9 @@ config GPIO_NXP_74HC153
- Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
- provides a GPIO interface supporting input mode only.
-
-+config GPIO_LATCH
-+ tristate "GPIO latch driver"
-+ help
-+ Say yes here to enable a GPIO latch driver.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_GPIO_IT8761E) += gpio-it876
- obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
- obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
- obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
-+obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o
- obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
- obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
- obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
+++ /dev/null
---- a/drivers/spi/spi-bitbang.c
-+++ b/drivers/spi/spi-bitbang.c
-@@ -234,13 +234,14 @@ void spi_bitbang_cleanup(struct spi_devi
- }
- EXPORT_SYMBOL_GPL(spi_bitbang_cleanup);
-
--static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
-+int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
- {
- struct spi_bitbang_cs *cs = spi->controller_state;
- unsigned nsecs = cs->nsecs;
-
- return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t);
- }
-+EXPORT_SYMBOL_GPL(spi_bitbang_bufs);
-
- /*----------------------------------------------------------------------*/
-
---- a/include/linux/spi/spi_bitbang.h
-+++ b/include/linux/spi/spi_bitbang.h
-@@ -44,6 +44,7 @@ extern void spi_bitbang_cleanup(struct s
- extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
- extern int spi_bitbang_setup_transfer(struct spi_device *spi,
- struct spi_transfer *t);
-+extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t);
-
- /* start or stop queue processing */
- extern int spi_bitbang_start(struct spi_bitbang *spi);
+++ /dev/null
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -422,6 +422,12 @@ extern struct spi_master *spi_busnum_to_
-
- /*---------------------------------------------------------------------------*/
-
-+enum spi_transfer_type {
-+ SPI_TRANSFER_GENERIC = 0,
-+ SPI_TRANSFER_FLASH_READ_CMD,
-+ SPI_TRANSFER_FLASH_READ_DATA,
-+};
-+
- /*
- * I/O INTERFACE between SPI controller and protocol drivers
- *
-@@ -524,6 +530,7 @@ struct spi_transfer {
- u8 bits_per_word;
- u16 delay_usecs;
- u32 speed_hz;
-+ enum spi_transfer_type type;
-
- struct list_head transfer_list;
- };
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -357,10 +357,12 @@ static int m25p80_read(struct mtd_info *
- * OPCODE_FAST_READ (if available) is faster.
- * Should add 1 byte DUMMY_BYTE.
- */
-+ t[0].type = SPI_TRANSFER_FLASH_READ_CMD;
- t[0].tx_buf = flash->command;
- t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
- spi_message_add_tail(&t[0], &m);
-
-+ t[1].type = SPI_TRANSFER_FLASH_READ_DATA;
- spi_message_add_tail(&t[1], &m);
-
- mutex_lock(&flash->lock);
+++ /dev/null
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -37,6 +37,11 @@
-
- #define ATH79_SPI_CS_LINE_MAX 2
-
-+enum ath79_spi_state {
-+ ATH79_SPI_STATE_WAIT_CMD = 0,
-+ ATH79_SPI_STATE_WAIT_READ,
-+};
-+
- struct ath79_spi {
- struct spi_bitbang bitbang;
- u32 ioc_base;
-@@ -44,6 +49,11 @@ struct ath79_spi {
- void __iomem *base;
- struct clk *clk;
- unsigned rrw_delay;
-+
-+ enum ath79_spi_state state;
-+ u32 clk_div;
-+ unsigned long read_addr;
-+ unsigned long ahb_rate;
- };
-
- static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
-@@ -111,9 +121,6 @@ static void ath79_spi_enable(struct ath7
- /* save CTRL register */
- sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
- sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
--
-- /* TODO: setup speed? */
-- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
- }
-
- static void ath79_spi_disable(struct ath79_spi *sp)
-@@ -232,6 +239,110 @@ static u32 ath79_spi_txrx_mode0(struct s
- return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
- }
-
-+static int ath79_spi_do_read_flash_data(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+
-+ /* disable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
-+
-+ memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len);
-+
-+ /* enable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-+
-+ /* restore IOC register */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
-+
-+ return t->len;
-+}
-+
-+static int ath79_spi_do_read_flash_cmd(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+ int len;
-+ const u8 *p;
-+
-+ sp->read_addr = 0;
-+
-+ len = t->len - 1;
-+ p = t->tx_buf;
-+
-+ while (len--) {
-+ p++;
-+ sp->read_addr <<= 8;
-+ sp->read_addr |= *p;
-+ }
-+
-+ return t->len;
-+}
-+
-+static bool ath79_spi_is_read_cmd(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ return t->type == SPI_TRANSFER_FLASH_READ_CMD;
-+}
-+
-+static bool ath79_spi_is_data_read(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ return t->type == SPI_TRANSFER_FLASH_READ_DATA;
-+}
-+
-+static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+ int ret;
-+
-+ switch (sp->state) {
-+ case ATH79_SPI_STATE_WAIT_CMD:
-+ if (ath79_spi_is_read_cmd(spi, t)) {
-+ ret = ath79_spi_do_read_flash_cmd(spi, t);
-+ sp->state = ATH79_SPI_STATE_WAIT_READ;
-+ } else {
-+ ret = spi_bitbang_bufs(spi, t);
-+ }
-+ break;
-+
-+ case ATH79_SPI_STATE_WAIT_READ:
-+ if (ath79_spi_is_data_read(spi, t)) {
-+ ret = ath79_spi_do_read_flash_data(spi, t);
-+ } else {
-+ dev_warn(&spi->dev, "flash data read expected\n");
-+ ret = -EIO;
-+ }
-+ sp->state = ATH79_SPI_STATE_WAIT_CMD;
-+ break;
-+
-+ default:
-+ BUG();
-+ }
-+
-+ return ret;
-+}
-+
-+static int ath79_spi_setup_transfer(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+ struct ath79_spi_controller_data *cdata;
-+ int ret;
-+
-+ ret = spi_bitbang_setup_transfer(spi, t);
-+ if (ret)
-+ return ret;
-+
-+ cdata = spi->controller_data;
-+ if (cdata->is_flash)
-+ sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs;
-+ else
-+ sp->bitbang.txrx_bufs = spi_bitbang_bufs;
-+
-+ return ret;
-+}
-+
- static int ath79_spi_probe(struct platform_device *pdev)
- {
- struct spi_master *master;
-@@ -254,6 +365,8 @@ static int ath79_spi_probe(struct platfo
- sp = spi_master_get_devdata(master);
- platform_set_drvdata(pdev, sp);
-
-+ sp->state = ATH79_SPI_STATE_WAIT_CMD;
-+
- master->setup = ath79_spi_setup;
- master->cleanup = ath79_spi_cleanup;
- master->bus_num = pdata->bus_num;
-@@ -262,7 +375,7 @@ static int ath79_spi_probe(struct platfo
- sp->bitbang.master = spi_master_get(master);
- sp->bitbang.chipselect = ath79_spi_chipselect;
- sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
-- sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
-+ sp->bitbang.setup_transfer = ath79_spi_setup_transfer;
- sp->bitbang.flags = SPI_CS_HIGH;
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-@@ -287,7 +400,8 @@ static int ath79_spi_probe(struct platfo
- if (ret)
- goto err_clk_put;
-
-- rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
-+ sp->ahb_rate = clk_get_rate(sp->clk);
-+ rate = DIV_ROUND_UP(sp->ahb_rate, MHZ);
- if (!rate) {
- ret = -EINVAL;
- goto err_clk_disable;
---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-@@ -24,6 +24,7 @@ enum ath79_spi_cs_type {
- struct ath79_spi_controller_data {
- enum ath79_spi_cs_type cs_type;
- unsigned cs_line;
-+ bool is_flash;
- };
-
- #endif /* _ATH79_SPI_PLATFORM_H */
+++ /dev/null
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
-@@ -0,0 +1,37 @@
-+/*
-+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
-+#define __ASM_MACH_ATH79_MANGLE_PORT_H
-+
-+#ifdef CONFIG_PCI
-+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
-+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
-+#else
-+#define ath79_pci_swizzle_b(port) (port)
-+#define ath79_pci_swizzle_w(port) (port)
-+#endif
-+
-+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
-+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
-+#define __swizzle_addr_l(port) (port)
-+#define __swizzle_addr_q(port) (port)
-+
-+# define ioswabb(a, x) (x)
-+# define __mem_ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define __mem_ioswabw(a, x) cpu_to_le16(x)
-+# define ioswabl(a, x) (x)
-+# define __mem_ioswabl(a, x) cpu_to_le32(x)
-+# define ioswabq(a, x) (x)
-+# define __mem_ioswabq(a, x) cpu_to_le64(x)
-+
-+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -13,6 +13,7 @@
- */
-
- #include <linux/init.h>
-+#include <linux/export.h>
- #include <linux/pci.h>
- #include <linux/resource.h>
- #include <linux/platform_device.h>
-@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st
- static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
- static unsigned ath79_pci_nr_irqs __initdata;
-
-+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
-+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
-+
- static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
- {
- .slot = 17,
-@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id,
- return pdev;
- }
-
-+static inline bool ar71xx_is_pci_addr(unsigned long port)
-+{
-+ unsigned long phys = CPHYSADDR(port);
-+
-+ return (phys >= AR71XX_PCI_MEM_BASE &&
-+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
-+}
-+
-+unsigned long ath79_pci_swizzle_b(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_b)
-+ return __ath79_pci_swizzle_b(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_b);
-+
-+unsigned long ath79_pci_swizzle_w(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_w)
-+ return __ath79_pci_swizzle_w(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_w);
-+
- int __init ath79_register_pci(void)
- {
- struct platform_device *pdev = NULL;
-
- if (soc_is_ar71xx()) {
- pdev = ath79_register_pci_ar71xx();
-+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
-+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
- } else if (soc_is_ar724x()) {
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac
- },
- };
-
--static void __init ar913x_wmac_setup(void)
-+static int ar913x_wmac_reset(void)
- {
- /* reset the WMAC */
- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
-@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi
- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
- mdelay(10);
-
-+ return 0;
-+}
-+
-+static void __init ar913x_wmac_setup(void)
-+{
-+ ar913x_wmac_reset();
-+
- ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
-+
-+ ath79_wmac_data.external_reset = ar913x_wmac_reset;
- }
-
-
+++ /dev/null
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -249,6 +249,37 @@ static int ehci_reset (struct ehci_hcd *
- command |= CMD_RESET;
- dbg_cmd (ehci, "reset", command);
- ehci_writel(ehci, command, &ehci->regs->command);
-+
-+ if (ehci->qca_force_host_mode) {
-+ u32 usbmode;
-+
-+ udelay(1000);
-+
-+ usbmode = ehci_readl(ehci, &ehci->regs->usbmode);
-+ usbmode |= USBMODE_CM_HC | (1 << 4);
-+ ehci_writel(ehci, usbmode, &ehci->regs->usbmode);
-+
-+ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n",
-+ ehci_readl(ehci, &ehci->regs->usbmode));
-+ }
-+
-+ if (ehci->qca_force_16bit_ptw) {
-+ u32 port_status;
-+
-+ udelay(1000);
-+
-+ /* enable 16-bit UTMI interface */
-+ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
-+ port_status |= BIT(28);
-+ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]);
-+
-+ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n",
-+ ehci_readl(ehci, &ehci->regs->port_status[0]));
-+ }
-+
-+ if (ehci->reset_notifier)
-+ ehci->reset_notifier(ehci_to_hcd(ehci));
-+
- ehci->rh_state = EHCI_RH_HALTED;
- ehci->next_statechange = jiffies;
- retval = handshake (ehci, &ehci->regs->command,
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -202,6 +202,10 @@ struct ehci_hcd { /* one per controlle
- unsigned need_oc_pp_cycle:1; /* MPC834X port power */
- unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
- unsigned ignore_oc:1;
-+ unsigned qca_force_host_mode:1;
-+ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */
-+
-+ void (*reset_notifier)(struct usb_hcd *hcd);
-
- /* required for usb32 quirk */
- #define OHCI_CTRL_HCFS (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -43,6 +43,8 @@ struct usb_ehci_pdata {
- unsigned big_endian_mmio:1;
- unsigned no_io_watchdog:1;
- unsigned ignore_oc:1;
-+ unsigned qca_force_host_mode:1;
-+ unsigned qca_force_16bit_ptw:1;
-
- /* Turn on all power and clocks */
- int (*power_on)(struct platform_device *pdev);
-@@ -51,6 +53,7 @@ struct usb_ehci_pdata {
- /* Turn on only VBUS suspend power and hotplug detection,
- * turn off everything else */
- void (*power_suspend)(struct platform_device *pdev);
-+ void (*reset_notifier)(struct platform_device *pdev);
- };
-
- #endif /* __USB_CORE_EHCI_PDRIVER_H */
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -36,6 +36,14 @@
-
- static const char hcd_name[] = "ehci-platform";
-
-+static void ehci_platform_reset_notifier(struct usb_hcd *hcd)
-+{
-+ struct platform_device *pdev = to_platform_device(hcd->self.controller);
-+ struct usb_ehci_pdata *pdata = pdev->dev.platform_data;
-+
-+ pdata->reset_notifier(pdev);
-+}
-+
- static int ehci_platform_reset(struct usb_hcd *hcd)
- {
- struct platform_device *pdev = to_platform_device(hcd->self.controller);
-@@ -48,6 +56,11 @@ static int ehci_platform_reset(struct us
- ehci->big_endian_desc = pdata->big_endian_desc;
- ehci->big_endian_mmio = pdata->big_endian_mmio;
- ehci->ignore_oc = pdata->ignore_oc;
-+ ehci->qca_force_host_mode = pdata->qca_force_host_mode;
-+ ehci->qca_force_16bit_ptw = pdata->qca_force_16bit_ptw;
-+
-+ if (pdata->reset_notifier)
-+ ehci->reset_notifier = ehci_platform_reset_notifier;
-
- ehci->caps = hcd->regs + pdata->caps_offset;
- retval = ehci_setup(hcd);
+++ /dev/null
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -183,6 +183,7 @@ endif
- #
- libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/
- libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
- libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/
- libs-y += arch/mips/fw/lib/
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -998,6 +998,9 @@ config MIPS_MSC
- config MIPS_NILE4
- bool
-
-+config MYLOADER
-+ bool
-+
- config SYNC_R4K
- bool
-
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -15,6 +15,7 @@
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/irq.h>
-+#include <linux/etherdevice.h>
- #include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-
-@@ -22,6 +23,7 @@
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "dev-wmac.h"
-
-+static u8 ath79_wmac_mac[ETH_ALEN];
- static struct ath9k_platform_data ath79_wmac_data;
-
- static struct resource ath79_wmac_resources[] = {
-@@ -160,7 +162,7 @@ static void qca955x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = true;
- }
-
--void __init ath79_register_wmac(u8 *cal_data)
-+void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
- ar913x_wmac_setup();
-@@ -177,5 +179,10 @@ void __init ath79_register_wmac(u8 *cal_
- memcpy(ath79_wmac_data.eeprom_data, cal_data,
- sizeof(ath79_wmac_data.eeprom_data));
-
-+ if (mac_addr) {
-+ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
-+ ath79_wmac_data.macaddr = ath79_wmac_mac;
-+ }
-+
- platform_device_register(&ath79_wmac_device);
- }
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -12,6 +12,6 @@
- #ifndef _ATH79_DEV_WMAC_H
- #define _ATH79_DEV_WMAC_H
-
--void ath79_register_wmac(u8 *cal_data);
-+void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
-
- #endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/ath79/mach-ap81.c
-+++ b/arch/mips/ath79/mach-ap81.c
-@@ -98,7 +98,7 @@ static void __init ap81_setup(void)
- ap81_gpio_keys);
- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
- ARRAY_SIZE(ap81_spi_info));
-- ath79_register_wmac(cal_data);
-+ ath79_register_wmac(cal_data, NULL);
- ath79_register_usb();
- }
-
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -134,7 +134,7 @@ static void __init db120_setup(void)
- ath79_register_spi(&db120_spi_data, db120_spi_info,
- ARRAY_SIZE(db120_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
-+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
- }
-
---- a/arch/mips/ath79/mach-ap121.c
-+++ b/arch/mips/ath79/mach-ap121.c
-@@ -91,7 +91,7 @@ static void __init ap121_setup(void)
- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
- ARRAY_SIZE(ap121_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(cal_data);
-+ ath79_register_wmac(cal_data, NULL);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+++ /dev/null
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -25,7 +25,9 @@
- #include <asm/mach-ath79/ath79.h>
- #include "common.h"
-
--static void __iomem *ath79_gpio_base;
-+void __iomem *ath79_gpio_base;
-+EXPORT_SYMBOL_GPL(ath79_gpio_base);
-+
- static unsigned long ath79_gpio_count;
- static DEFINE_SPINLOCK(ath79_gpio_lock);
-
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -116,6 +116,7 @@ static inline int soc_is_qca955x(void)
- }
-
- extern void __iomem *ath79_ddr_base;
-+extern void __iomem *ath79_gpio_base;
- extern void __iomem *ath79_pll_base;
- extern void __iomem *ath79_reset_base;
-
+++ /dev/null
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -22,6 +22,7 @@
- #include "common.h"
-
- static DEFINE_SPINLOCK(ath79_device_reset_lock);
-+static DEFINE_MUTEX(ath79_flash_mutex);
-
- u32 ath79_cpu_freq;
- EXPORT_SYMBOL_GPL(ath79_cpu_freq);
-@@ -111,3 +112,16 @@ void ath79_device_reset_clear(u32 mask)
- spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
-+
-+void ath79_flash_acquire(void)
-+{
-+ mutex_lock(&ath79_flash_mutex);
-+}
-+EXPORT_SYMBOL_GPL(ath79_flash_acquire);
-+
-+void ath79_flash_release(void)
-+{
-+ mutex_unlock(&ath79_flash_mutex);
-+}
-+EXPORT_SYMBOL_GPL(ath79_flash_release);
-+
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -143,4 +143,7 @@ static inline u32 ath79_reset_rr(unsigne
- void ath79_device_reset_set(u32 mask);
- void ath79_device_reset_clear(u32 mask);
-
-+void ath79_flash_acquire(void);
-+void ath79_flash_release(void);
-+
- #endif /* __ASM_MACH_ATH79_H */
+++ /dev/null
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -142,6 +142,7 @@ static inline u32 ath79_reset_rr(unsigne
-
- void ath79_device_reset_set(u32 mask);
- void ath79_device_reset_clear(u32 mask);
-+u32 ath79_device_reset_get(u32 mask);
-
- void ath79_flash_acquire(void);
- void ath79_flash_release(void);
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -113,6 +113,32 @@ void ath79_device_reset_clear(u32 mask)
- }
- EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
-
-+u32 ath79_device_reset_get(u32 mask)
-+{
-+ unsigned long flags;
-+ u32 reg;
-+ u32 ret;
-+
-+ if (soc_is_ar71xx())
-+ reg = AR71XX_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar724x())
-+ reg = AR724X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar913x())
-+ reg = AR913X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar933x())
-+ reg = AR933X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar934x())
-+ reg = AR934X_RESET_REG_RESET_MODULE;
-+ else
-+ BUG();
-+
-+ spin_lock_irqsave(&ath79_device_reset_lock, flags);
-+ ret = ath79_reset_rr(reg);
-+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(ath79_device_reset_get);
-+
- void ath79_flash_acquire(void)
- {
- mutex_lock(&ath79_flash_mutex);
+++ /dev/null
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -26,6 +26,7 @@ void ath79_ddr_wb_flush(unsigned int reg
- void ath79_gpio_function_enable(u32 mask);
- void ath79_gpio_function_disable(u32 mask);
- void ath79_gpio_function_setup(u32 set, u32 clear);
-+void ath79_gpio_output_select(unsigned gpio, u8 val);
- void ath79_gpio_init(void);
-
- #endif /* __ATH79_COMMON_H */
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -180,6 +180,34 @@ void ath79_gpio_function_disable(u32 mas
- ath79_gpio_function_setup(0, mask);
- }
-
-+void __init ath79_gpio_output_select(unsigned gpio, u8 val)
-+{
-+ void __iomem *base = ath79_gpio_base;
-+ unsigned long flags;
-+ unsigned int reg;
-+ u32 t, s;
-+
-+ BUG_ON(!soc_is_ar934x());
-+
-+ if (gpio >= AR934X_GPIO_COUNT)
-+ return;
-+
-+ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
-+ s = 8 * (gpio % 4);
-+
-+ spin_lock_irqsave(&ath79_gpio_lock, flags);
-+
-+ t = __raw_readl(base + reg);
-+ t &= ~(0xff << s);
-+ t |= val << s;
-+ __raw_writel(t, base + reg);
-+
-+ /* flush write */
-+ (void) __raw_readl(base + reg);
-+
-+ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
-+}
-+
- void __init ath79_gpio_init(void)
- {
- int err;
+++ /dev/null
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -19,6 +19,8 @@
-
- #include "common.h"
-
-+static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
-+
- static inline int is_valid_ram_addr(void *addr)
- {
- if (((u32) addr > KSEG0) &&
-@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void
- return 0;
- }
-
-+static void __init ath79_prom_append_cmdline(const char *name,
-+ const char *value)
-+{
-+ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
-+ " %s=%s", name, value);
-+ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
-+}
-+
-+static const char * __init ath79_prom_find_env(char **envp, const char *name)
-+{
-+ const char *ret = NULL;
-+ int len;
-+ char **p;
-+
-+ if (!is_valid_ram_addr(envp))
-+ return NULL;
-+
-+ len = strlen(name);
-+ for (p = envp; is_valid_ram_addr(*p); p++) {
-+ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') {
-+ ret = *p + len + 1;
-+ break;
-+ }
-+
-+ /* RedBoot env comes in pointer pairs - key, value */
-+ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0)
-+ if (is_valid_ram_addr(*(++p))) {
-+ ret = *p;
-+ break;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
- static __init void ath79_prom_init_cmdline(int argc, char **argv)
- {
- int i;
-@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli
-
- void __init prom_init(void)
- {
-+ const char *env;
-+ char **envp;
-+
- ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
-+
-+ envp = (char **)fw_arg2;
-+ if (!strstr(arcs_cmdline, "ethaddr=")) {
-+ env = ath79_prom_find_env(envp, "ethaddr");
-+ if (env)
-+ ath79_prom_append_cmdline("ethaddr", env);
-+ }
-+
-+ if (!strstr(arcs_cmdline, "board=")) {
-+ env = ath79_prom_find_env(envp, "board");
-+ if (env) {
-+ /* Workaround for buggy bootloaders */
-+ if (strcmp(env, "RouterStation") == 0 ||
-+ strcmp(env, "Ubiquiti AR71xx-based board") == 0)
-+ env = "UBNT-RS";
-+
-+ if (strcmp(env, "RouterStation PRO") == 0)
-+ env = "UBNT-RSPRO";
-+
-+ ath79_prom_append_cmdline("board", env);
-+ }
-+ }
- }
-
- void __init prom_free_prom_memory(void)
+++ /dev/null
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -16,6 +16,7 @@
-
- #include <asm/bootinfo.h>
- #include <asm/addrspace.h>
-+#include <asm/fw/myloader/myloader.h>
-
- #include "common.h"
-
-@@ -69,6 +70,37 @@ static const char * __init ath79_prom_fi
- return ret;
- }
-
-+static int __init ath79_prom_init_myloader(void)
-+{
-+ struct myloader_info *mylo;
-+ char mac_buf[32];
-+ unsigned char *mac;
-+
-+ mylo = myloader_get_info();
-+ if (!mylo)
-+ return 0;
-+
-+ switch (mylo->did) {
-+ case DEVID_COMPEX_WP543:
-+ ath79_prom_append_cmdline("board", "WP543");
-+ break;
-+ case DEVID_COMPEX_WPE72:
-+ ath79_prom_append_cmdline("board", "WPE72");
-+ break;
-+ default:
-+ pr_warn("prom: unknown device id: %x\n", mylo->did);
-+ return 0;
-+ }
-+
-+ mac = mylo->macs[0];
-+ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+
-+ ath79_prom_append_cmdline("ethaddr", mac_buf);
-+
-+ return 1;
-+}
-+
- static __init void ath79_prom_init_cmdline(int argc, char **argv)
- {
- int i;
-@@ -88,6 +120,9 @@ void __init prom_init(void)
- const char *env;
- char **envp;
-
-+ if (ath79_prom_init_myloader())
-+ return;
-+
- ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
-
- envp = (char **)fw_arg2;
+++ /dev/null
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi
- return ret;
- }
-
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+extern char __image_cmdline[];
-+
-+static int __init ath79_use_image_cmdline(void)
-+{
-+ char *p = __image_cmdline;
-+ int replace = 0;
-+
-+ if (*p == '-') {
-+ replace = 1;
-+ p++;
-+ }
-+
-+ if (*p == '\0')
-+ return 0;
-+
-+ if (replace) {
-+ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
-+ } else {
-+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
-+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
-+ }
-+
-+ return 1;
-+}
-+#else
-+static inline int ath79_use_image_cmdline(void) { return 0; }
-+#endif
-+
- static int __init ath79_prom_init_myloader(void)
- {
- struct myloader_info *mylo;
-@@ -98,6 +127,8 @@ static int __init ath79_prom_init_myload
-
- ath79_prom_append_cmdline("ethaddr", mac_buf);
-
-+ ath79_use_image_cmdline();
-+
- return 1;
- }
-
-@@ -105,6 +136,9 @@ static __init void ath79_prom_init_cmdli
- {
- int i;
-
-+ if (ath79_use_image_cmdline())
-+ return;
-+
- if (!is_valid_ram_addr(argv))
- return;
-
+++ /dev/null
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -218,6 +218,8 @@ void __init plat_time_init(void)
- mips_hpt_frequency = clk_get_rate(clk) / 2;
- }
-
-+__setup("board=", mips_machtype_setup);
-+
- static int __init ath79_setup(void)
- {
- ath79_gpio_init();
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -24,7 +24,10 @@
- #include "dev-wmac.h"
-
- static u8 ath79_wmac_mac[ETH_ALEN];
--static struct ath9k_platform_data ath79_wmac_data;
-+
-+static struct ath9k_platform_data ath79_wmac_data = {
-+ .led_pin = -1,
-+};
-
- static struct resource ath79_wmac_resources[] = {
- {
+++ /dev/null
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -87,6 +87,15 @@ void __init ath79_register_uart(void)
- if (IS_ERR(clk))
- panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
-
-+ if (soc_is_ar71xx())
-+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar724x())
-+ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar913x())
-+ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar933x())
-+ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN);
-+
- if (soc_is_ar71xx() ||
- soc_is_ar724x() ||
- soc_is_ar913x() ||
+++ /dev/null
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned
- /* nothing to do */
- }
-
-+static void prom_enable_uart(u32 id)
-+{
-+ void __iomem *gpio_base;
-+ u32 uart_en;
-+ u32 t;
-+
-+ switch (id) {
-+ case REV_ID_MAJOR_AR71XX:
-+ uart_en = AR71XX_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR7240:
-+ case REV_ID_MAJOR_AR7241:
-+ case REV_ID_MAJOR_AR7242:
-+ uart_en = AR724X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR913X:
-+ uart_en = AR913X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9330:
-+ case REV_ID_MAJOR_AR9331:
-+ uart_en = AR933X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9341:
-+ case REV_ID_MAJOR_AR9342:
-+ case REV_ID_MAJOR_AR9344:
-+ /* TODO */
-+ default:
-+ return;
-+ }
-+
-+ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
-+ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
-+ t |= uart_en;
-+ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
-+}
-+
- static void prom_putchar_init(void)
- {
- void __iomem *base;
-@@ -86,8 +126,10 @@ static void prom_putchar_init(void)
-
- default:
- _prom_putchar = prom_putchar_dummy;
-- break;
-+ return;
- }
-+
-+ prom_enable_uart(id);
- }
-
- void prom_putchar(unsigned char ch)
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -189,3 +189,9 @@ void __init ath79_register_wmac(u8 *cal_
-
- platform_device_register(&ath79_wmac_device);
- }
-+
-+void __init ath79_register_wmac_simple(void)
-+{
-+ ath79_register_wmac(NULL, NULL);
-+ ath79_wmac_data.eeprom_name = "soc_wmac.eeprom";
-+}
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -13,5 +13,6 @@
- #define _ATH79_DEV_WMAC_H
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
-+void ath79_register_wmac_simple(void);
-
- #endif /* _ATH79_DEV_WMAC_H */
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -165,6 +165,137 @@ static void qca955x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = true;
- }
-
-+static bool __init
-+ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
-+{
-+ int timeout = 1000;
-+ u32 val;
-+
-+ __raw_readl(base + AR9300_OTP_BASE + (4 * addr));
-+ while (timeout--) {
-+ val = __raw_readl(base + AR9300_OTP_STATUS);
-+ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID)
-+ break;
-+
-+ udelay(10);
-+ }
-+
-+ if (!timeout)
-+ return false;
-+
-+ *data = __raw_readl(base + AR9300_OTP_READ_DATA);
-+ return true;
-+}
-+
-+static bool __init
-+ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len)
-+{
-+ u32 data;
-+ int i;
-+
-+ for (i = 0; i < len; i++) {
-+ int offset = 8 * ((addr - i) % 4);
-+
-+ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data))
-+ return false;
-+
-+ dest[i] = (data >> offset) & 0xff;
-+ }
-+
-+ return true;
-+}
-+
-+static bool __init
-+ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest,
-+ int dest_start, int dest_len)
-+{
-+ int dest_bytes = 0;
-+ int offset = 0;
-+ int end = addr - len;
-+ u8 hdr[2];
-+
-+ while (addr > end) {
-+ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2))
-+ return false;
-+
-+ addr -= 2;
-+ offset += hdr[0];
-+
-+ if (offset <= dest_start + dest_len &&
-+ offset + len >= dest_start) {
-+ int data_offset = 0;
-+ int dest_offset = 0;
-+ int copy_len;
-+
-+ if (offset < dest_start)
-+ data_offset = dest_start - offset;
-+ else
-+ dest_offset = offset - dest_start;
-+
-+ copy_len = len - data_offset;
-+ if (copy_len > dest_len - dest_offset)
-+ copy_len = dest_len - dest_offset;
-+
-+ ar93xx_wmac_otp_read(base, addr - data_offset,
-+ dest + dest_offset,
-+ copy_len);
-+
-+ dest_bytes += copy_len;
-+ }
-+ addr -= hdr[1];
-+ }
-+ return !!dest_bytes;
-+}
-+
-+bool __init ar93xx_wmac_read_mac_address(u8 *dest)
-+{
-+ void __iomem *base;
-+ bool ret = false;
-+ int addr = 0x1ff;
-+ unsigned int len;
-+ u32 hdr_u32;
-+ u8 *hdr = (u8 *) &hdr_u32;
-+ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 };
-+ int mac_start = 2, mac_end = 8;
-+
-+ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x());
-+ base = ioremap_nocache(AR933X_WMAC_BASE, AR933X_WMAC_SIZE);
-+ while (addr > sizeof(hdr)) {
-+ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr)))
-+ break;
-+
-+ if (hdr_u32 == 0 || hdr_u32 == ~0)
-+ break;
-+
-+ len = (hdr[1] << 4) | (hdr[2] >> 4);
-+ addr -= 4;
-+
-+ switch (hdr[0] >> 5) {
-+ case 0:
-+ if (len < mac_end)
-+ break;
-+
-+ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6);
-+ ret = true;
-+ break;
-+ case 3:
-+ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac,
-+ mac_start, 6);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ addr -= len + 2;
-+ }
-+
-+ iounmap(base);
-+ if (ret)
-+ memcpy(dest, mac, 6);
-+
-+ return ret;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -14,5 +14,6 @@
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
- void ath79_register_wmac_simple(void);
-+bool ar93xx_wmac_read_mac_address(u8 *dest);
-
- #endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -113,6 +113,14 @@
- #define QCA955X_EHCI1_BASE 0x1b400000
- #define QCA955X_EHCI_SIZE 0x1000
-
-+#define AR9300_OTP_BASE 0x14000
-+#define AR9300_OTP_STATUS 0x15f18
-+#define AR9300_OTP_STATUS_TYPE 0x7
-+#define AR9300_OTP_STATUS_VALID 0x4
-+#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
-+#define AR9300_OTP_STATUS_SM_BUSY 0x1
-+#define AR9300_OTP_READ_DATA 0x15f1c
-+
- /*
- * DDR_CTRL block
- */
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -296,6 +296,16 @@ bool __init ar93xx_wmac_read_mac_address
- return ret;
- }
-
-+void __init ath79_wmac_disable_2ghz(void)
-+{
-+ ath79_wmac_data.disable_2ghz = true;
-+}
-+
-+void __init ath79_wmac_disable_5ghz(void)
-+{
-+ ath79_wmac_data.disable_5ghz = true;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -14,6 +14,9 @@
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
- void ath79_register_wmac_simple(void);
-+void ath79_wmac_disable_2ghz(void);
-+void ath79_wmac_disable_5ghz(void);
-+
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
- #endif /* _ATH79_DEV_WMAC_H */
+++ /dev/null
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -37,6 +37,8 @@ static struct usb_ehci_pdata ath79_ehci_
- static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
- .caps_offset = 0x100,
- .has_tt = 1,
-+ .qca_force_host_mode = 1,
-+ .qca_force_16bit_ptw = 1,
- };
-
- static void __init ath79_usb_register(const char *name, int id,
-@@ -159,6 +161,9 @@ static void __init ar913x_usb_setup(void
- ath79_device_reset_clear(AR913X_RESET_USB_PHY);
- mdelay(10);
-
-+ ath79_ehci_pdata_v2.qca_force_host_mode = 0;
-+ ath79_ehci_pdata_v2.qca_force_16bit_ptw = 0;
-+
- ath79_usb_register("ehci-platform", -1,
- AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
-@@ -182,14 +187,34 @@ static void __init ar933x_usb_setup(void
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
--static void __init ar934x_usb_setup(void)
-+static void enable_tx_tx_idp_violation_fix(unsigned base)
- {
-- u32 bootstrap;
-+ void __iomem *phy_reg;
-+ u32 t;
-
-- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
-+ phy_reg = ioremap(base, 4);
-+ if (!phy_reg)
- return;
-
-+ t = ioread32(phy_reg);
-+ t &= ~0xff;
-+ t |= 0x58;
-+ iowrite32(t, phy_reg);
-+
-+ iounmap(phy_reg);
-+}
-+
-+static void ar934x_usb_reset_notifier(struct platform_device *pdev)
-+{
-+ if (pdev->id != -1)
-+ return;
-+
-+ enable_tx_tx_idp_violation_fix(0x18116c94);
-+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
-+}
-+
-+static void __init ar934x_usb_setup(void)
-+{
- ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
- udelay(1000);
-
-@@ -202,14 +227,40 @@ static void __init ar934x_usb_setup(void
- ath79_device_reset_clear(AR934X_RESET_USB_HOST);
- udelay(1000);
-
-+ if (ath79_soc_rev >= 3)
-+ ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier;
-+
- ath79_usb_register("ehci-platform", -1,
- AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
-+static void qca955x_usb_reset_notifier(struct platform_device *pdev)
-+{
-+ u32 base;
-+
-+ switch (pdev->id) {
-+ case 0:
-+ base = 0x18116c94;
-+ break;
-+
-+ case 1:
-+ base = 0x18116e54;
-+ break;
-+
-+ default:
-+ return;
-+ }
-+
-+ enable_tx_tx_idp_violation_fix(base);
-+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
-+}
-+
- static void __init qca955x_usb_setup(void)
- {
-+ ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier;
-+
- ath79_usb_register("ehci-platform", 0,
- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
- ATH79_IP3_IRQ(0),
+++ /dev/null
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -21,6 +21,10 @@
- #include <linux/bitops.h>
-
- #define AR71XX_APB_BASE 0x18000000
-+#define AR71XX_GE0_BASE 0x19000000
-+#define AR71XX_GE0_SIZE 0x10000
-+#define AR71XX_GE1_BASE 0x1a000000
-+#define AR71XX_GE1_SIZE 0x10000
- #define AR71XX_EHCI_BASE 0x1b000000
- #define AR71XX_EHCI_SIZE 0x1000
- #define AR71XX_OHCI_BASE 0x1c000000
-@@ -40,6 +44,8 @@
- #define AR71XX_PLL_SIZE 0x100
- #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
- #define AR71XX_RESET_SIZE 0x100
-+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR71XX_MII_SIZE 0x100
-
- #define AR71XX_PCI_MEM_BASE 0x10000000
- #define AR71XX_PCI_MEM_SIZE 0x07000000
-@@ -82,15 +88,21 @@
-
- #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
- #define AR933X_UART_SIZE 0x14
-+#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR933X_GMAC_SIZE 0x04
- #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR933X_WMAC_SIZE 0x20000
- #define AR933X_EHCI_BASE 0x1b000000
- #define AR933X_EHCI_SIZE 0x1000
-
-+#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR934X_GMAC_SIZE 0x14
- #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR934X_WMAC_SIZE 0x20000
- #define AR934X_EHCI_BASE 0x1b000000
- #define AR934X_EHCI_SIZE 0x200
-+#define AR934X_NFC_BASE 0x1b000200
-+#define AR934X_NFC_SIZE 0xb8
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-
-@@ -107,11 +119,15 @@
- #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
- #define QCA955X_PCI_CTRL_SIZE 0x100
-
-+#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA955X_GMAC_SIZE 0x40
- #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define QCA955X_WMAC_SIZE 0x20000
- #define QCA955X_EHCI0_BASE 0x1b000000
- #define QCA955X_EHCI1_BASE 0x1b400000
- #define QCA955X_EHCI_SIZE 0x1000
-+#define QCA955X_NFC_BASE 0x1b800200
-+#define QCA955X_NFC_SIZE 0xb8
-
- #define AR9300_OTP_BASE 0x14000
- #define AR9300_OTP_STATUS 0x15f18
-@@ -175,6 +191,9 @@
- #define AR71XX_AHB_DIV_SHIFT 20
- #define AR71XX_AHB_DIV_MASK 0x7
-
-+#define AR71XX_ETH0_PLL_SHIFT 17
-+#define AR71XX_ETH1_PLL_SHIFT 19
-+
- #define AR724X_PLL_REG_CPU_CONFIG 0x00
- #define AR724X_PLL_REG_PCIE_CONFIG 0x18
-
-@@ -187,6 +206,8 @@
- #define AR724X_DDR_DIV_SHIFT 22
- #define AR724X_DDR_DIV_MASK 0x3
-
-+#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
-+
- #define AR913X_PLL_REG_CPU_CONFIG 0x00
- #define AR913X_PLL_REG_ETH_CONFIG 0x04
- #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
-@@ -199,6 +220,9 @@
- #define AR913X_AHB_DIV_SHIFT 19
- #define AR913X_AHB_DIV_MASK 0x1
-
-+#define AR913X_ETH0_PLL_SHIFT 20
-+#define AR913X_ETH1_PLL_SHIFT 22
-+
- #define AR933X_PLL_CPU_CONFIG_REG 0x00
- #define AR933X_PLL_CLOCK_CTRL_REG 0x08
-
-@@ -220,6 +244,8 @@
- #define AR934X_PLL_CPU_CONFIG_REG 0x00
- #define AR934X_PLL_DDR_CONFIG_REG 0x04
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
-+#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
-
- #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -252,9 +278,13 @@
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
-+
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-+#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
-+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
-
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -379,16 +409,83 @@
- #define AR913X_RESET_USB_HOST BIT(5)
- #define AR913X_RESET_USB_PHY BIT(4)
-
-+#define AR933X_RESET_GE1_MDIO BIT(23)
-+#define AR933X_RESET_GE0_MDIO BIT(22)
-+#define AR933X_RESET_GE1_MAC BIT(13)
- #define AR933X_RESET_WMAC BIT(11)
-+#define AR933X_RESET_GE0_MAC BIT(9)
- #define AR933X_RESET_USB_HOST BIT(5)
- #define AR933X_RESET_USB_PHY BIT(4)
- #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
-
-+#define AR934X_RESET_HOST BIT(31)
-+#define AR934X_RESET_SLIC BIT(30)
-+#define AR934X_RESET_HDMA BIT(29)
-+#define AR934X_RESET_EXTERNAL BIT(28)
-+#define AR934X_RESET_RTC BIT(27)
-+#define AR934X_RESET_PCIE_EP_INT BIT(26)
-+#define AR934X_RESET_CHKSUM_ACC BIT(25)
-+#define AR934X_RESET_FULL_CHIP BIT(24)
-+#define AR934X_RESET_GE1_MDIO BIT(23)
-+#define AR934X_RESET_GE0_MDIO BIT(22)
-+#define AR934X_RESET_CPU_NMI BIT(21)
-+#define AR934X_RESET_CPU_COLD BIT(20)
-+#define AR934X_RESET_HOST_RESET_INT BIT(19)
-+#define AR934X_RESET_PCIE_EP BIT(18)
-+#define AR934X_RESET_UART1 BIT(17)
-+#define AR934X_RESET_DDR BIT(16)
-+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define AR934X_RESET_NANDF BIT(14)
-+#define AR934X_RESET_GE1_MAC BIT(13)
-+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
- #define AR934X_RESET_USB_PHY_ANALOG BIT(11)
-+#define AR934X_RESET_HOST_DMA_INT BIT(10)
-+#define AR934X_RESET_GE0_MAC BIT(9)
-+#define AR934X_RESET_ETH_SWITCH BIT(8)
-+#define AR934X_RESET_PCIE_PHY BIT(7)
-+#define AR934X_RESET_PCIE BIT(6)
- #define AR934X_RESET_USB_HOST BIT(5)
- #define AR934X_RESET_USB_PHY BIT(4)
- #define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define AR934X_RESET_LUT BIT(2)
-+#define AR934X_RESET_MBOX BIT(1)
-+#define AR934X_RESET_I2S BIT(0)
-+
-+#define QCA955X_RESET_HOST BIT(31)
-+#define QCA955X_RESET_SLIC BIT(30)
-+#define QCA955X_RESET_HDMA BIT(29)
-+#define QCA955X_RESET_EXTERNAL BIT(28)
-+#define QCA955X_RESET_RTC BIT(27)
-+#define QCA955X_RESET_PCIE_EP_INT BIT(26)
-+#define QCA955X_RESET_CHKSUM_ACC BIT(25)
-+#define QCA955X_RESET_FULL_CHIP BIT(24)
-+#define QCA955X_RESET_GE1_MDIO BIT(23)
-+#define QCA955X_RESET_GE0_MDIO BIT(22)
-+#define QCA955X_RESET_CPU_NMI BIT(21)
-+#define QCA955X_RESET_CPU_COLD BIT(20)
-+#define QCA955X_RESET_HOST_RESET_INT BIT(19)
-+#define QCA955X_RESET_PCIE_EP BIT(18)
-+#define QCA955X_RESET_UART1 BIT(17)
-+#define QCA955X_RESET_DDR BIT(16)
-+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define QCA955X_RESET_NANDF BIT(14)
-+#define QCA955X_RESET_GE1_MAC BIT(13)
-+#define QCA955X_RESET_SGMII_ANALOG BIT(12)
-+#define QCA955X_RESET_USB_PHY_ANALOG BIT(11)
-+#define QCA955X_RESET_HOST_DMA_INT BIT(10)
-+#define QCA955X_RESET_GE0_MAC BIT(9)
-+#define QCA955X_RESET_SGMII BIT(8)
-+#define QCA955X_RESET_PCIE_PHY BIT(7)
-+#define QCA955X_RESET_PCIE BIT(6)
-+#define QCA955X_RESET_USB_HOST BIT(5)
-+#define QCA955X_RESET_USB_PHY BIT(4)
-+#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define QCA955X_RESET_LUT BIT(2)
-+#define QCA955X_RESET_MBOX BIT(1)
-+#define QCA955X_RESET_I2S BIT(0)
-
-+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
-+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
- #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
- #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-@@ -530,6 +627,12 @@
- #define AR71XX_GPIO_REG_INT_ENABLE 0x24
- #define AR71XX_GPIO_REG_FUNC 0x28
-
-+#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
-+#define AR934X_GPIO_REG_OUT_FUNC1 0x30
-+#define AR934X_GPIO_REG_OUT_FUNC2 0x34
-+#define AR934X_GPIO_REG_OUT_FUNC3 0x38
-+#define AR934X_GPIO_REG_OUT_FUNC4 0x3c
-+#define AR934X_GPIO_REG_OUT_FUNC5 0x40
- #define AR934X_GPIO_REG_FUNC 0x6c
-
- #define AR71XX_GPIO_COUNT 16
-@@ -561,4 +664,149 @@
- #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
- #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
-
-+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
-+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
-+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
-+#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
-+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
-+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
-+
-+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
-+#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
-+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
-+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
-+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
-+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-+#define AR724X_GPIO_FUNC_UART_EN BIT(1)
-+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-+
-+#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
-+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
-+#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
-+#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19)
-+#define AR913X_GPIO_FUNC_I2S1_EN BIT(18)
-+#define AR913X_GPIO_FUNC_I2S0_EN BIT(17)
-+#define AR913X_GPIO_FUNC_SLIC_EN BIT(16)
-+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
-+#define AR913X_GPIO_FUNC_UART_EN BIT(8)
-+#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4)
-+
-+#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31)
-+#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30)
-+#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29)
-+#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27)
-+#define AR933X_GPIO_FUNC_I2SO_EN BIT(26)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23)
-+#define AR933X_GPIO_FUNC_SPI_EN BIT(18)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-+#define AR933X_GPIO_FUNC_UART_EN BIT(1)
-+#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-+
-+#define AR934X_GPIO_FUNC_CLK_OBS7_EN BIT(9)
-+#define AR934X_GPIO_FUNC_CLK_OBS6_EN BIT(8)
-+#define AR934X_GPIO_FUNC_CLK_OBS5_EN BIT(7)
-+#define AR934X_GPIO_FUNC_CLK_OBS4_EN BIT(6)
-+#define AR934X_GPIO_FUNC_CLK_OBS3_EN BIT(5)
-+#define AR934X_GPIO_FUNC_CLK_OBS2_EN BIT(4)
-+#define AR934X_GPIO_FUNC_CLK_OBS1_EN BIT(3)
-+#define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2)
-+#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1)
-+
-+#define AR934X_GPIO_OUT_GPIO 0
-+#define AR934X_GPIO_OUT_SPI_CS1 7
-+#define AR934X_GPIO_OUT_LED_LINK0 41
-+#define AR934X_GPIO_OUT_LED_LINK1 42
-+#define AR934X_GPIO_OUT_LED_LINK2 43
-+#define AR934X_GPIO_OUT_LED_LINK3 44
-+#define AR934X_GPIO_OUT_LED_LINK4 45
-+#define AR934X_GPIO_OUT_EXT_LNA0 46
-+#define AR934X_GPIO_OUT_EXT_LNA1 47
-+
-+/*
-+ * MII_CTRL block
-+ */
-+#define AR71XX_MII_REG_MII0_CTRL 0x00
-+#define AR71XX_MII_REG_MII1_CTRL 0x04
-+
-+#define AR71XX_MII_CTRL_IF_MASK 3
-+#define AR71XX_MII_CTRL_SPEED_SHIFT 4
-+#define AR71XX_MII_CTRL_SPEED_MASK 3
-+#define AR71XX_MII_CTRL_SPEED_10 0
-+#define AR71XX_MII_CTRL_SPEED_100 1
-+#define AR71XX_MII_CTRL_SPEED_1000 2
-+
-+#define AR71XX_MII0_CTRL_IF_GMII 0
-+#define AR71XX_MII0_CTRL_IF_MII 1
-+#define AR71XX_MII0_CTRL_IF_RGMII 2
-+#define AR71XX_MII0_CTRL_IF_RMII 3
-+
-+#define AR71XX_MII1_CTRL_IF_RGMII 0
-+#define AR71XX_MII1_CTRL_IF_RMII 1
-+
-+/*
-+ * AR933X GMAC interface
-+ */
-+#define AR933X_GMAC_REG_ETH_CFG 0x00
-+
-+#define AR933X_ETH_CFG_RGMII_GE0 BIT(0)
-+#define AR933X_ETH_CFG_MII_GE0 BIT(1)
-+#define AR933X_ETH_CFG_GMII_GE0 BIT(2)
-+#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
-+#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4)
-+#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
-+#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
-+#define AR933X_ETH_CFG_RMII_GE0 BIT(9)
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10)
-+
-+/*
-+ * AR934X GMAC Interface
-+ */
-+#define AR934X_GMAC_REG_ETH_CFG 0x00
-+
-+#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
-+#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
-+#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
-+#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3)
-+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4)
-+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5)
-+#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
-+#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9)
-+#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10)
-+#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
-+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
-+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+#define AR934X_ETH_CFG_RXD_DELAY BIT(14)
-+#define AR934X_ETH_CFG_RDV_DELAY BIT(16)
-+
-+/*
-+ * QCA955X GMAC Interface
-+ */
-+
-+#define QCA955X_GMAC_REG_ETH_CFG 0x00
-+
-+#define QCA955X_ETH_CFG_RGMII_EN BIT(0)
-+#define QCA955X_ETH_CFG_GE0_SGMII BIT(6)
-+
- #endif /* __ASM_MACH_AR71XX_REGS_H */
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -106,6 +106,20 @@ config SOC_QCA955X
- select PCI_AR724X if PCI
- def_bool n
-
-+config ATH79_DEV_M25P80
-+ select ATH79_DEV_SPI
-+ def_bool n
-+
-+config ATH79_DEV_AP9X_PCI
-+ select ATH79_PCI_ATH9K_FIXUP
-+ def_bool n
-+
-+config ATH79_DEV_DSA
-+ def_bool n
-+
-+config ATH79_DEV_ETH
-+ def_bool n
-+
- config PCI_AR724X
- def_bool n
-
-@@ -115,6 +129,10 @@ config ATH79_DEV_GPIO_BUTTONS
- config ATH79_DEV_LEDS_GPIO
- def_bool n
-
-+config ATH79_DEV_NFC
-+ depends on (SOC_AR934X || SOC_QCA955X)
-+ def_bool n
-+
- config ATH79_DEV_SPI
- def_bool n
-
-@@ -125,4 +143,13 @@ config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
- def_bool n
-
-+config ATH79_NVRAM
-+ def_bool n
-+
-+config ATH79_PCI_ATH9K_FIXUP
-+ def_bool n
-+
-+config ATH79_ROUTERBOOT
-+ def_bool n
-+
- endif
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI) += pci.o
- # Devices
- #
- obj-y += dev-common.o
-+obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o
-+obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o
-+obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o
- obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
- obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
-+obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o
-+obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o
- obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
- obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
- obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
-
- #
-+# Miscellaneous objects
-+#
-+obj-$(CONFIG_ATH79_NVRAM) += nvram.o
-+obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o
-+obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o
-+
-+#
- # Machines
- #
- obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+++ /dev/null
---- a/arch/mips/ath79/mach-ap121.c
-+++ b/arch/mips/ath79/mach-ap121.c
-@@ -1,19 +1,21 @@
- /*
- * Atheros AP121 board support
- *
-- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
--#include "machtypes.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
-+#include "machtypes.h"
-
- #define AP121_GPIO_LED_WLAN 0
- #define AP121_GPIO_LED_USB 1
-@@ -24,7 +26,14 @@
- #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
-
--#define AP121_CAL_DATA_ADDR 0x1fff1000
-+#define AP121_MAC0_OFFSET 0x0000
-+#define AP121_MAC1_OFFSET 0x0006
-+#define AP121_CALDATA_OFFSET 0x1000
-+#define AP121_WMAC_MAC_OFFSET 0x1002
-+
-+#define AP121_MINI_GPIO_LED_WLAN 0
-+#define AP121_MINI_GPIO_BTN_JUMPSTART 12
-+#define AP121_MINI_GPIO_BTN_RESET 11
-
- static struct gpio_led ap121_leds_gpio[] __initdata = {
- {
-@@ -58,41 +67,78 @@ static struct gpio_keys_button ap121_gpi
- }
- };
-
--static struct ath79_spi_controller_data ap121_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
-+static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
-+ {
-+ .name = "ap121:green:wlan",
-+ .gpio = AP121_MINI_GPIO_LED_WLAN,
-+ .active_low = 0,
-+ },
- };
-
--static struct spi_board_info ap121_spi_info[] = {
-+static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l1606e",
-- .controller_data = &ap121_spi0_data,
-+ .desc = "jumpstart button",
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART,
-+ .active_low = 1,
-+ },
-+ {
-+ .desc = "reset button",
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = AP121_MINI_GPIO_BTN_RESET,
-+ .active_low = 1,
- }
- };
-
--static struct ath79_spi_platform_data ap121_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
-+static void __init ap121_common_setup(void)
-+{
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+ ath79_register_wmac(art + AP121_CALDATA_OFFSET,
-+ art + AP121_WMAC_MAC_OFFSET);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
-+ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
-+
-+ ath79_register_mdio(0, 0x0);
-+
-+ /* LAN ports */
-+ ath79_register_eth(1);
-+
-+ /* WAN port */
-+ ath79_register_eth(0);
-+}
-
- static void __init ap121_setup(void)
- {
-- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
-+ ap121_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
- ap121_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap121_gpio_keys),
- ap121_gpio_keys);
--
-- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
-- ARRAY_SIZE(ap121_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(cal_data, NULL);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
- ap121_setup);
-+
-+static void __init ap121_mini_setup(void)
-+{
-+ ap121_common_setup();
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
-+ ap121_mini_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ap121_mini_gpio_keys),
-+ ap121_mini_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
-+ ap121_mini_setup);
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
- config ATH79_MACH_AP121
- bool "Atheros AP121 reference board"
- select SOC_AR933X
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -17,6 +17,7 @@
- enum ath79_mach_type {
- ATH79_MACH_GENERIC = 0,
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
-+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
+++ /dev/null
---- a/arch/mips/ath79/mach-ap81.c
-+++ b/arch/mips/ath79/mach-ap81.c
-@@ -9,12 +9,16 @@
- * by the Free Software Foundation.
- */
-
--#include "machtypes.h"
--#include "dev-wmac.h"
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
- #include "dev-usb.h"
-+#include "dev-wmac.h"
-+#include "machtypes.h"
-
- #define AP81_GPIO_LED_STATUS 1
- #define AP81_GPIO_LED_AOSS 3
-@@ -29,6 +33,37 @@
-
- #define AP81_CAL_DATA_ADDR 0x1fff1000
-
-+static struct mtd_partition ap81_partitions[] = {
-+ {
-+ .name = "u-boot",
-+ .offset = 0,
-+ .size = 0x040000,
-+ .mask_flags = MTD_WRITEABLE,
-+ }, {
-+ .name = "u-boot-env",
-+ .offset = 0x040000,
-+ .size = 0x010000,
-+ }, {
-+ .name = "rootfs",
-+ .offset = 0x050000,
-+ .size = 0x500000,
-+ }, {
-+ .name = "uImage",
-+ .offset = 0x550000,
-+ .size = 0x100000,
-+ }, {
-+ .name = "ART",
-+ .offset = 0x650000,
-+ .size = 0x1b0000,
-+ .mask_flags = MTD_WRITEABLE,
-+ }
-+};
-+
-+static struct flash_platform_data ap81_flash_data = {
-+ .parts = ap81_partitions,
-+ .nr_parts = ARRAY_SIZE(ap81_partitions),
-+};
-+
- static struct gpio_led ap81_leds_gpio[] __initdata = {
- {
- .name = "ap81:green:status",
-@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio
- }
- };
-
--static struct ath79_spi_controller_data ap81_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
--};
--
--static struct spi_board_info ap81_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "m25p64",
-- .controller_data = &ap81_spi0_data,
-- }
--};
--
--static struct ath79_spi_platform_data ap81_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
- static void __init ap81_setup(void)
- {
- u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
-@@ -96,10 +111,24 @@ static void __init ap81_setup(void)
- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap81_gpio_keys),
- ap81_gpio_keys);
-- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
-- ARRAY_SIZE(ap81_spi_info));
-+ ath79_register_m25p80(&ap81_flash_data);
- ath79_register_wmac(cal_data, NULL);
- ath79_register_usb();
-+
-+ ath79_register_mdio(0, 0x0);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-+ ath79_eth0_data.speed = SPEED_100;
-+ ath79_eth0_data.duplex = DUPLEX_FULL;
-+ ath79_eth0_data.has_ar8216 = 1;
-+
-+ ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-+ ath79_eth1_data.phy_mask = 0x10;
-+
-+ ath79_register_eth(0);
-+ ath79_register_eth(1);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -30,9 +30,10 @@ config ATH79_MACH_AP136
- config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
- select SOC_AR913X
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
+++ /dev/null
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -2,7 +2,7 @@
- * Atheros DB120 reference board support
- *
- * Copyright (c) 2011 Qualcomm Atheros
-- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
-@@ -19,16 +19,26 @@
- */
-
- #include <linux/pci.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/ar8216_platform.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "dev-ap9x-pci.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
-+#include "dev-nfc.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
-
-+#define DB120_GPIO_LED_USB 11
- #define DB120_GPIO_LED_WLAN_5G 12
- #define DB120_GPIO_LED_WLAN_2G 13
- #define DB120_GPIO_LED_STATUS 14
-@@ -39,8 +49,10 @@
- #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
- #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
-
--#define DB120_WMAC_CALDATA_OFFSET 0x1000
--#define DB120_PCIE_CALDATA_OFFSET 0x5000
-+#define DB120_MAC0_OFFSET 0
-+#define DB120_MAC1_OFFSET 6
-+#define DB120_WMAC_CALDATA_OFFSET 0x1000
-+#define DB120_PCIE_CALDATA_OFFSET 0x5000
-
- static struct gpio_led db120_leds_gpio[] __initdata = {
- {
-@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
- .gpio = DB120_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
-+ {
-+ .name = "db120:green:usb",
-+ .gpio = DB120_GPIO_LED_USB,
-+ .active_low = 1,
-+ }
- };
-
- static struct gpio_keys_button db120_gpio_keys[] __initdata = {
-@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi
- },
- };
-
--static struct ath79_spi_controller_data db120_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
-+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
-+ .mode = AR8327_PAD_MAC_RGMII,
-+ .txclk_delay_en = true,
-+ .rxclk_delay_en = true,
-+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- };
-
--static struct spi_board_info db120_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "s25sl064a",
-- .controller_data = &db120_spi0_data,
-- }
-+static struct ar8327_led_cfg db120_ar8327_led_cfg = {
-+ .led_ctrl0 = 0x00000000,
-+ .led_ctrl1 = 0xc737c737,
-+ .led_ctrl2 = 0x00000000,
-+ .led_ctrl3 = 0x00c30c00,
-+ .open_drain = true,
- };
-
--static struct ath79_spi_platform_data db120_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
-+static struct ar8327_platform_data db120_ar8327_data = {
-+ .pad0_cfg = &db120_ar8327_pad0_cfg,
-+ .port0_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
-+ .led_cfg = &db120_ar8327_led_cfg,
- };
-
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data db120_ath9k_data;
--
--static int db120_pci_plat_dev_init(struct pci_dev *dev)
--{
-- switch (PCI_SLOT(dev->devfn)) {
-- case 0:
-- dev->dev.platform_data = &db120_ath9k_data;
-- break;
-- }
--
-- return 0;
--}
--
--static void __init db120_pci_init(u8 *eeprom)
--{
-- memcpy(db120_ath9k_data.eeprom_data, eeprom,
-- sizeof(db120_ath9k_data.eeprom_data));
--
-- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void db120_pci_init(void) {}
--#endif /* CONFIG_PCI */
-+static struct mdio_board_info db120_mdio0_info[] = {
-+ {
-+ .bus_id = "ag71xx-mdio.0",
-+ .phy_addr = 0,
-+ .platform_data = &db120_ar8327_data,
-+ },
-+};
-
- static void __init db120_setup(void)
- {
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
-+ ath79_register_m25p80(NULL);
-+
- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
- db120_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(db120_gpio_keys),
- db120_gpio_keys);
-- ath79_register_spi(&db120_spi_data, db120_spi_info,
-- ARRAY_SIZE(db120_spi_info));
- ath79_register_usb();
- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
-- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
-+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
-+
-+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
-+ AR934X_ETH_CFG_SW_ONLY_MODE);
-+
-+ ath79_register_mdio(1, 0x0);
-+ ath79_register_mdio(0, 0x0);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
-+
-+ mdiobus_register_board_info(db120_mdio0_info,
-+ ARRAY_SIZE(db120_mdio0_info));
-+
-+ /* GMAC0 is connected to an AR8327 switch */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
-+ ath79_register_eth(0);
-+
-+ /* GMAC1 is connected to the internal switch */
-+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+
-+ ath79_register_eth(1);
-+
-+ ath79_register_nfc();
- }
-
- MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -43,9 +43,12 @@ config ATH79_MACH_AP81
- config ATH79_MACH_DB120
- bool "Atheros DB120 reference board"
- select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
+++ /dev/null
---- a/arch/mips/ath79/mach-pb44.c
-+++ b/arch/mips/ath79/mach-pb44.c
-@@ -8,23 +8,48 @@
- * by the Free Software Foundation.
- */
-
-+#include <linux/delay.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- #include <linux/i2c/pcf857x.h>
-+#include <linux/i2c/pcf857x.h>
-+#include <linux/spi/flash.h>
-+#include <linux/spi/vsc7385.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+#include <asm/mach-ath79/ath79.h>
-+
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
-+#include "machtypes.h"
- #include "pci.h"
-
- #define PB44_GPIO_I2C_SCL 0
- #define PB44_GPIO_I2C_SDA 1
-
-+#define PB44_PCF8757_VSC7395_CS 0
-+#define PB44_PCF8757_STEREO_CS 1
-+#define PB44_PCF8757_SLIC_CS0 2
-+#define PB44_PCF8757_SLIC_TEST 3
-+#define PB44_PCF8757_SLIC_INT0 4
-+#define PB44_PCF8757_SLIC_INT1 5
-+#define PB44_PCF8757_SW_RESET 6
-+#define PB44_PCF8757_SW_JUMP 8
-+#define PB44_PCF8757_LED_JUMP1 9
-+#define PB44_PCF8757_LED_JUMP2 10
-+#define PB44_PCF8757_TP24 11
-+#define PB44_PCF8757_TP25 12
-+#define PB44_PCF8757_TP26 13
-+#define PB44_PCF8757_TP27 14
-+#define PB44_PCF8757_TP28 15
-+
- #define PB44_GPIO_EXP_BASE 16
-+#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
- #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
- #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
- #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
-@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
- .cs_line = 0,
- };
-
-+static struct ath79_spi_controller_data pb44_spi1_data = {
-+ .cs_type = ATH79_SPI_CS_TYPE_GPIO,
-+ .cs_line = PB44_GPIO_VSC7395_CS,
-+};
-+
-+static void pb44_vsc7395_reset(void)
-+{
-+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
-+ udelay(10);
-+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
-+ mdelay(50);
-+}
-+
-+static struct vsc7385_platform_data pb44_vsc7395_data = {
-+ .reset = pb44_vsc7395_reset,
-+ .ucode_name = "vsc7395_ucode_pb44.bin",
-+ .mac_cfg = {
-+ .tx_ipg = 6,
-+ .bit2 = 1,
-+ .clk_sel = 0,
-+ },
-+};
-+
-+static const char *pb44_part_probes[] = {
-+ "RedBoot",
-+ NULL,
-+};
-+
-+static struct flash_platform_data pb44_flash_data = {
-+ .part_probes = pb44_part_probes,
-+};
-+
- static struct spi_board_info pb44_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
-+ .platform_data = &pb44_flash_data,
- .controller_data = &pb44_spi0_data,
- },
-+ {
-+ .bus_num = 0,
-+ .chip_select = 1,
-+ .max_speed_hz = 25000000,
-+ .modalias = "spi-vsc7385",
-+ .platform_data = &pb44_vsc7395_data,
-+ .controller_data = &pb44_spi1_data,
-+ }
- };
-
- static struct ath79_spi_platform_data pb44_spi_data = {
- .bus_num = 0,
-- .num_chipselect = 1,
-+ .num_chipselect = 2,
- };
-
-+#define PB44_WAN_PHYMASK BIT(0)
-+#define PB44_LAN_PHYMASK 0
-+#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
-+
- static void __init pb44_init(void)
- {
- i2c_register_board_info(0, pb44_i2c_board_info,
-@@ -122,6 +192,22 @@ static void __init pb44_init(void)
- ARRAY_SIZE(pb44_spi_info));
- ath79_register_usb();
- ath79_register_pci();
-+
-+ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
-+
-+ ath79_register_eth(0);
-+
-+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+ ath79_eth1_pll_data.pll_1000 = 0x110000;
-+
-+ ath79_register_eth(1);
- }
-
- MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -58,6 +58,7 @@ config ATH79_MACH_DB120
- config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
- select SOC_AR71XX
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -70,9 +70,10 @@ config ATH79_MACH_PB44
- config ATH79_MACH_UBNT_XM
- bool "Ubiquiti Networks XM (rev 1.0) board"
- select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- help
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -16,10 +16,11 @@
-
- #include <asm/mach-ath79/irq.h>
-
--#include "machtypes.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
-+#include "machtypes.h"
- #include "pci.h"
-
- #define UBNT_XM_GPIO_LED_L1 0
-@@ -32,7 +33,7 @@
- #define UBNT_XM_KEYS_POLL_INTERVAL 20
- #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
-
--#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
-+#define UBNT_XM_EEPROM_ADDR 0x1fff1000
-
- static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
- {
-@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g
- }
- };
-
--static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
--};
--
--static struct spi_board_info ubnt_xm_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- .controller_data = &ubnt_xm_spi0_data,
-- }
--};
--
--static struct ath79_spi_platform_data ubnt_xm_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ubnt_xm_eeprom_data;
--
--static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
--{
-- switch (PCI_SLOT(dev->devfn)) {
-- case 0:
-- dev->dev.platform_data = &ubnt_xm_eeprom_data;
-- break;
-- }
--
-- return 0;
--}
--
--static void __init ubnt_xm_pci_init(void)
--{
-- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
-- sizeof(ubnt_xm_eeprom_data.eeprom_data));
--
-- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void ubnt_xm_pci_init(void) {}
--#endif /* CONFIG_PCI */
--
- static void __init ubnt_xm_init(void)
- {
-+ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
-+
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
- ubnt_xm_leds_gpio);
-
-@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void)
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-
-- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
-- ARRAY_SIZE(ubnt_xm_spi_info));
--
-- ubnt_xm_pci_init();
-+ ath79_register_m25p80(NULL);
-+ ap91_pci_init(eeprom, NULL);
- }
-
- MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+++ /dev/null
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -12,16 +12,22 @@
-
- #include <linux/init.h>
- #include <linux/pci.h>
-+#include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ar8216_platform.h>
-
- #include <asm/mach-ath79/irq.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-
- #include "dev-ap9x-pci.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-m25p80.h"
-+#include "dev-usb.h"
-+#include "dev-wmac.h"
- #include "machtypes.h"
--#include "pci.h"
-
- #define UBNT_XM_GPIO_LED_L1 0
- #define UBNT_XM_GPIO_LED_L2 1
-@@ -37,19 +43,19 @@
-
- static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
- {
-- .name = "ubnt-xm:red:link1",
-+ .name = "ubnt:red:link1",
- .gpio = UBNT_XM_GPIO_LED_L1,
- .active_low = 0,
- }, {
-- .name = "ubnt-xm:orange:link2",
-+ .name = "ubnt:orange:link2",
- .gpio = UBNT_XM_GPIO_LED_L2,
- .active_low = 0,
- }, {
-- .name = "ubnt-xm:green:link3",
-+ .name = "ubnt:green:link3",
- .gpio = UBNT_XM_GPIO_LED_L3,
- .active_low = 0,
- }, {
-- .name = "ubnt-xm:green:link4",
-+ .name = "ubnt:green:link4",
- .gpio = UBNT_XM_GPIO_LED_L4,
- .active_low = 0,
- },
-@@ -66,9 +72,13 @@ static struct gpio_keys_button ubnt_xm_g
- }
- };
-
-+#define UBNT_M_WAN_PHYMASK BIT(4)
-+
- static void __init ubnt_xm_init(void)
- {
- u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
-+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
- ubnt_xm_leds_gpio);
-@@ -79,9 +89,246 @@ static void __init ubnt_xm_init(void)
-
- ath79_register_m25p80(NULL);
- ap91_pci_init(eeprom, NULL);
-+
-+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-+ ath79_register_eth(0);
- }
-
- MIPS_MACHINE(ATH79_MACH_UBNT_XM,
- "UBNT-XM",
- "Ubiquiti Networks XM (rev 1.0) board",
- ubnt_xm_init);
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
-+ ubnt_xm_init);
-+
-+static void __init ubnt_rocket_m_setup(void)
-+{
-+ ubnt_xm_init();
-+ ath79_register_usb();
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
-+ ubnt_rocket_m_setup);
-+
-+static void __init ubnt_nano_m_setup(void)
-+{
-+ ubnt_xm_init();
-+ ath79_register_eth(1);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
-+ ubnt_nano_m_setup);
-+
-+static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
-+ {
-+ .name = "ubnt:green:globe",
-+ .gpio = 0,
-+ .active_low = 1,
-+ }, {
-+ .name = "ubnt:green:power",
-+ .gpio = 11,
-+ .active_low = 1,
-+ .default_state = LEDS_GPIO_DEFSTATE_ON,
-+ }
-+};
-+
-+static void __init ubnt_airrouter_setup(void)
-+{
-+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+ ath79_register_m25p80(NULL);
-+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
-+
-+ ath79_register_eth(1);
-+ ath79_register_eth(0);
-+ ath79_register_usb();
-+
-+ ap91_pci_init(ee, NULL);
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
-+ ubnt_airrouter_leds_gpio);
-+
-+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ubnt_xm_gpio_keys),
-+ ubnt_xm_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
-+ ubnt_airrouter_setup);
-+
-+static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
-+ {
-+ .name = "ubnt:orange:dome",
-+ .gpio = 1,
-+ .active_low = 0,
-+ }, {
-+ .name = "ubnt:green:dome",
-+ .gpio = 0,
-+ .active_low = 0,
-+ }
-+};
-+
-+static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
-+ {
-+ .name = "ubnt:orange:front",
-+ .gpio = 1,
-+ .active_low = 0,
-+ }, {
-+ .name = "ubnt:green:front",
-+ .gpio = 0,
-+ .active_low = 0,
-+ }
-+};
-+
-+static void __init ubnt_unifi_setup(void)
-+{
-+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-+ ath79_register_eth(0);
-+
-+ ap91_pci_init(ee, NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
-+ ubnt_unifi_leds_gpio);
-+
-+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ubnt_xm_gpio_keys),
-+ ubnt_xm_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
-+ ubnt_unifi_setup);
-+
-+
-+#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4)
-+#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
-+
-+static void __init ubnt_unifi_outdoor_setup(void)
-+{
-+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
-+ UBNT_UNIFIOD_2ND_PHYMASK));
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-+ ath79_register_eth(0);
-+ ath79_register_eth(1);
-+
-+ ap91_pci_init(ee, NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
-+ ubnt_unifi_outdoor_leds_gpio);
-+
-+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ubnt_xm_gpio_keys),
-+ ubnt_xm_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
-+ "Ubiquiti UniFiAP Outdoor",
-+ ubnt_unifi_outdoor_setup);
-+
-+static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
-+ {
-+ .name = "ubnt:white:dome",
-+ .gpio = 12,
-+ }, {
-+ .name = "ubnt:blue:dome",
-+ .gpio = 13,
-+ }
-+};
-+
-+static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
-+ {
-+ .desc = "reset",
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = 17,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
-+ .mode = AR8327_PAD_MAC_RGMII,
-+ .txclk_delay_en = true,
-+ .rxclk_delay_en = true,
-+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-+};
-+
-+static struct ar8327_platform_data uap_pro_ar8327_data = {
-+ .pad0_cfg = &uap_pro_ar8327_pad0_cfg,
-+ .port0_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
-+};
-+
-+static struct mdio_board_info uap_pro_mdio0_info[] = {
-+ {
-+ .bus_id = "ag71xx-mdio.0",
-+ .phy_addr = 0,
-+ .platform_data = &uap_pro_ar8327_data,
-+ },
-+};
-+
-+#define UAP_PRO_MAC0_OFFSET 0x0000
-+#define UAP_PRO_MAC1_OFFSET 0x0006
-+#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000
-+#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000
-+
-+static void __init ubnt_uap_pro_setup(void)
-+{
-+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
-+ ubnt_uap_pro_gpio_leds);
-+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(uap_pro_gpio_keys),
-+ uap_pro_gpio_keys);
-+
-+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
-+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-+
-+ ath79_register_mdio(0, 0x0);
-+ mdiobus_register_board_info(uap_pro_mdio0_info,
-+ ARRAY_SIZE(uap_pro_mdio0_info));
-+
-+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-+ ath79_init_mac(ath79_eth0_data.mac_addr,
-+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
-+
-+ /* GMAC0 is connected to an AR8327 switch */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
-+ ath79_register_eth(0);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
-+ ubnt_uap_pro_setup);
-+
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -68,12 +68,16 @@ config ATH79_MACH_PB44
- Atheros PB44 reference board.
-
- config ATH79_MACH_UBNT_XM
-- bool "Ubiquiti Networks XM (rev 1.0) board"
-+ bool "Ubiquiti Networks XM/UniFi boards"
- select SOC_AR724X
-+ select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -22,6 +22,13 @@ enum ath79_mach_type {
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
-+ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
-+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
-+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
-+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
-+ ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
-+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
-+ ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
- };
-
+++ /dev/null
---- a/arch/mips/ath79/mach-ap136.c
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -18,23 +18,29 @@
- *
- */
-
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/ar8216_platform.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "pci.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
-+#include "dev-eth.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
-+#include "dev-nfc.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
-
--#define AP136_GPIO_LED_STATUS_RED 14
--#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_USB 4
--#define AP136_GPIO_LED_WLAN_2G 13
- #define AP136_GPIO_LED_WLAN_5G 12
-+#define AP136_GPIO_LED_WLAN_2G 13
-+#define AP136_GPIO_LED_STATUS_RED 14
- #define AP136_GPIO_LED_WPS_RED 15
-+#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_WPS_GREEN 20
-
- #define AP136_GPIO_BTN_WPS 16
-@@ -43,37 +49,39 @@
- #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
-
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
-+#define AP136_MAC0_OFFSET 0
-+#define AP136_MAC1_OFFSET 6
-+#define AP136_WMAC_CALDATA_OFFSET 0x1000
-+#define AP136_PCIE_CALDATA_OFFSET 0x5000
-
- static struct gpio_led ap136_leds_gpio[] __initdata = {
- {
-- .name = "qca:green:status",
-+ .name = "ap136:green:status",
- .gpio = AP136_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- },
- {
-- .name = "qca:red:status",
-+ .name = "ap136:red:status",
- .gpio = AP136_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
- {
-- .name = "qca:green:wps",
-+ .name = "ap136:green:wps",
- .gpio = AP136_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- },
- {
-- .name = "qca:red:wps",
-+ .name = "ap136:red:wps",
- .gpio = AP136_GPIO_LED_WPS_RED,
- .active_low = 1,
- },
- {
-- .name = "qca:red:wlan-2g",
-+ .name = "ap136:red:wlan-2g",
- .gpio = AP136_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
-- .name = "qca:red:usb",
-+ .name = "ap136:red:usb",
- .gpio = AP136_GPIO_LED_USB,
- .active_low = 1,
- }
-@@ -98,65 +106,152 @@ static struct gpio_keys_button ap136_gpi
- },
- };
-
--static struct ath79_spi_controller_data ap136_spi0_data = {
-- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
-- .cs_line = 0,
-+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
-+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
-+
-+static struct ar8327_platform_data ap136_ar8327_data = {
-+ .pad0_cfg = &ap136_ar8327_pad0_cfg,
-+ .pad6_cfg = &ap136_ar8327_pad6_cfg,
-+ .port0_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
-+ .port6_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
- };
-
--static struct spi_board_info ap136_spi_info[] = {
-+static struct mdio_board_info ap136_mdio0_info[] = {
- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- .controller_data = &ap136_spi0_data,
-- }
-+ .bus_id = "ag71xx-mdio.0",
-+ .phy_addr = 0,
-+ .platform_data = &ap136_ar8327_data,
-+ },
- };
-
--static struct ath79_spi_platform_data ap136_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
-+static void __init ap136_common_setup(void)
-+{
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-+ ap136_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ap136_gpio_keys),
-+ ap136_gpio_keys);
-+
-+ ath79_register_usb();
-+ ath79_register_nfc();
-+
-+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
-+
-+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
-+ ath79_register_mdio(0, 0x0);
-
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
-+
-+ mdiobus_register_board_info(ap136_mdio0_info,
-+ ARRAY_SIZE(ap136_mdio0_info));
-+
-+ /* GMAC0 is connected to the RMGII interface */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+
-+ ath79_register_eth(0);
-+
-+ /* GMAC1 is connected tot eh SGMII interface */
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+
-+ ath79_register_eth(1);
-+}
-+
-+static void __init ap136_010_setup(void)
- {
-- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
-- dev->dev.platform_data = &ap136_ath9k_data;
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-- return 0;
-+ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
-+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
-+ ap136_ar8327_pad0_cfg.txclk_delay_en = true;
-+ ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-+ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-+
-+ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
-+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
-+
-+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
-+
-+ ap136_common_setup();
-+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
- }
-
--static void __init ap136_pci_init(u8 *eeprom)
-+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-+ "Atheros AP136-010 reference board",
-+ ap136_010_setup);
-+
-+static void __init ap136_020_common_setup(void)
- {
-- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
-- sizeof(ap136_ath9k_data.eeprom_data));
-+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
-+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
-+ ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
-+
-+ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
-+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
-+ ap136_ar8327_pad6_cfg.txclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-
-- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
-- ath79_register_pci();
-+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
-+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
-+
-+ ap136_common_setup();
- }
--#else
--static inline void ap136_pci_init(void) {}
--#endif /* CONFIG_PCI */
-
--static void __init ap136_setup(void)
-+static void __init ap136_020_setup(void)
- {
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-- ap136_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ap136_gpio_keys),
-- ap136_gpio_keys);
-- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
-- ARRAY_SIZE(ap136_spi_info));
-- ath79_register_usb();
-- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
-- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-+ ap136_020_common_setup();
-+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
- }
-
--MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-- "Atheros AP136-010 reference board",
-- ap136_setup);
-+MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
-+ "Atheros AP136-020 reference board",
-+ ap136_020_setup);
-+
-+/*
-+ * AP135-020 is similar to AP136-020, any future AP135 specific init
-+ * code can be added here.
-+ */
-+static void __init ap135_020_setup(void)
-+{
-+ ap136_leds_gpio[0].name = "ap135:green:status";
-+ ap136_leds_gpio[1].name = "ap135:red:status";
-+ ap136_leds_gpio[2].name = "ap135:green:wps";
-+ ap136_leds_gpio[3].name = "ap135:red:wps";
-+ ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
-+ ap136_leds_gpio[5].name = "ap135:red:usb";
-+
-+ ap136_020_common_setup();
-+ ath79_register_pci();
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
-+ "Atheros AP135-020 reference board",
-+ ap135_020_setup);
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -18,7 +18,9 @@ enum ath79_mach_type {
- ATH79_MACH_GENERIC = 0,
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
- ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
-+ ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */
- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
-+ ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -16,16 +16,17 @@ config ATH79_MACH_AP121
- Atheros AP121 reference board.
-
- config ATH79_MACH_AP136
-- bool "Atheros AP136 reference board"
-+ bool "Atheros AP136/AP135 reference board"
- select SOC_QCA955X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_NFC
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
-- Atheros AP136 reference board.
-+ Atheros AP136 or AP135 reference boards.
-
- config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,144 @@
-
- enum ath79_mach_type {
- ATH79_MACH_GENERIC = 0,
-+ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */
-+ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */
-+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
-+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */
-+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
-+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
- ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
-+ ATH79_MACH_AP132, /* Atheros AP132 reference board */
- ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */
- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
- ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
-+ ATH79_MACH_AP83, /* Atheros AP83 */
-+ ATH79_MACH_AP96, /* Atheros AP96 */
-+ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
-+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
-+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
-+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
-+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
-+ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
-+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
-+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
-+ ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */
-+ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
-+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
-+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
-+ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */
-+ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
-+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
-+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
-+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
-+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
-+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
-+ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
-+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
-+ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
-+ ATH79_MACH_MR600, /* OpenMesh MR600 */
-+ ATH79_MACH_MYNET_N600, /* WD My Net N600 */
-+ ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */
-+ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
-+ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
-+ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
-+ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
-+ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
-+ ATH79_MACH_OM2P, /* OpenMesh OM2P */
-+ ATH79_MACH_PB42, /* Atheros PB42 */
-+ ATH79_MACH_PB92, /* Atheros PB92 */
-+ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
-+ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
-+ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
-+ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */
-+ ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */
-+ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */
-+ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
-+ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
-+ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
-+ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
-+ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
-+ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
-+ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
-+ ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
-+ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
-+ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
-+ ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */
-+ ATH79_MACH_RW2458N, /* Redwave RW2458N */
-+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
-+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
-+ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
-+ ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */
-+ ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */
-+ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
-+ ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */
-+ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
-+ ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */
-+ ATH79_MACH_TL_MR3040_V2, /* TP-LINK TL-MR3040 v2 */
-+ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
-+ ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */
-+ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
-+ ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */
-+ ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */
-+ ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/
-+ ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */
-+ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
-+ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
-+ ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
-+ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
-+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
-+ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
-+ ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
-+ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
-+ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
-+ ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */
-+ ATH79_MACH_TL_WR720N_V3, /* TP-LINK TL-WR720N v3 */
-+ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
-+ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/
-+ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
-+ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */
-+ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */
-+ ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
-+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
- ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
- ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
-+ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
-+ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
- ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
- ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
-+ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
-+ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
- ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
- ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
- ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
-+ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
-+ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
-+ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
-+ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
-+ ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */
-+ ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */
-+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
-+ ATH79_MACH_WNDR3700_V4, /* NETGEAR WNDR3700v4 */
-+ ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
-+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
-+ ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */
-+ ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
-+ ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
-+ ATH79_MACH_WP543, /* Compex WP543 */
-+ ATH79_MACH_WPE72, /* Compex WPE72 */
-+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
-+ ATH79_MACH_WRT400N, /* Linksys WRT400N */
-+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
-+ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
-+ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
-+ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
-+ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
-+ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
- };
-
- #endif /* _ATH79_MACHTYPE_H */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -2,6 +2,61 @@ if ATH79
-
- menu "Atheros AR71XX/AR724X/AR913X machine selection"
-
-+config ATH79_MACH_ALFA_AP96
-+ bool "ALFA Network AP96 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_HORNET_UB
-+ bool "ALFA Network Hornet-UB board support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_ALFA_NX
-+ bool "ALFA Network N2/N5 board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_ALL0258N
-+ bool "Allnet ALL0258N support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_ALL0315N
-+ bool "Allnet ALL0315N support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_AP113
-+ bool "Atheros AP113 board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_PB9X_PCI if PCI
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_ETH
-+
- config ATH79_MACH_AP121
- bool "Atheros AP121 reference board"
- select SOC_AR933X
-@@ -11,62 +66,734 @@ config ATH79_MACH_AP121
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP121 reference board.
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Atheros AP121 reference board.
-+
-+config ATH79_MACH_AP132
-+ bool "Atheros AP132 reference board"
-+ select SOC_QCA955X
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Atheros AP132 reference boards.
-+
-+config ATH79_MACH_AP136
-+ bool "Atheros AP136/AP135 reference board"
-+ select SOC_QCA955X
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_NFC
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Atheros AP136 or AP135 reference boards.
-+
-+config ATH79_MACH_AP81
-+ bool "Atheros AP81 reference board"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Atheros AP81 reference board.
-+
-+config ATH79_MACH_AP83
-+ bool "Atheros AP83 board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_AP96
-+ bool "Atheros AP96 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_DB120
-+ bool "Atheros DB120 reference board"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_NFC
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Atheros DB120 reference board.
-+
-+config ATH79_MACH_PB42
-+ bool "Atheros PB42 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_PB44
-+ bool "Atheros PB44 reference board"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_SPI
-+ select ATH79_DEV_USB
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Atheros PB44 reference board.
-+
-+config ATH79_MACH_PB92
-+ bool "Atheros PB92 board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_PB9X_PCI if PCI
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_AW_NR580
-+ bool "AzureWave AW-NR580 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_WHR_HP_G300N
-+ bool "Buffalo WHR-HP-G300N board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_WLAE_AG300N
-+ bool "Buffalo WLAE-AG300N board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_WLR8100
-+ bool "Sitecom WLR-8100 board support"
-+ select SOC_QCA955X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WZR_HP_AG300H
-+ bool "Buffalo WZR-HP-AG300H board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_WZR_HP_G300NH
-+ bool "Buffalo WZR-HP-G300NH board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ select RTL8366_SMI
-+
-+config ATH79_MACH_WZR_HP_G300NH2
-+ bool "Buffalo WZR-HP-G300NH2 board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_WZR_HP_G450H
-+ bool "Buffalo WZR-HP-G450H board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_WP543
-+ bool "Compex WP543/WPJ543 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select MYLOADER
-+
-+config ATH79_MACH_WPE72
-+ bool "Compex WPE72/WPE72NX board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select MYLOADER
-+
-+config ATH79_MACH_DIR_505_A1
-+ bool "D-Link DIR-505-A1 support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_DIR_600_A1
-+ bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_DIR_615_C1
-+ bool "D-Link DIR-615 rev. C1 support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_DIR_825_B1
-+ bool "D-Link DIR-825 rev. B1 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_DIR_825_C1
-+ bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_DRAGINO2
-+ bool "DRAGINO V2 support"
-+ select SOC_AR933X
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_WMAC
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_EW_DORIN
-+ bool "embedded wireless Dorin Platform support"
-+ select SOC_AR933X
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_WMAC
-+ select ATH79_DEV_ETH
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Dorin Platform from www.80211.de .
-+
-+config ATH79_MACH_JA76PF
-+ bool "jjPlus JA76PF board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_JWAP003
-+ bool "jjPlus JWAP003 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_WRT160NL
-+ bool "Linksys WRT160NL board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_WRT400N
-+ bool "Linksys WRT400N board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_RB4XX
-+ bool "MikroTik RouterBOARD 4xx series support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_RB750
-+ bool "MikroTik RouterBOARD 750 support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_USB
-+ select ATH79_ROUTERBOOT
-+ select RLE_DECOMPRESS
-+
-+config ATH79_MACH_RB95X
-+ bool "MikroTik RouterBOARD 95X support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_NFC
-+ select ATH79_DEV_WMAC
-+ select ATH79_DEV_USB
-+ select ATH79_ROUTERBOOT
-+ select RLE_DECOMPRESS
-+
-+config ATH79_MACH_RB2011
-+ bool "MikroTik RouterBOARD 2011 support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_NFC
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ select ATH79_ROUTERBOOT
-+ select RLE_DECOMPRESS
-+
-+config ATH79_MACH_WNDAP360
-+ bool "NETGEAR WNDAP360 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_WNDR3700
-+ bool "NETGEAR WNDR3700 board support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_WNDR4300
-+ bool "NETGEAR WNDR3700v4/WNDR4300 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_NFC
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WNR2000
-+ bool "NETGEAR WNR2000 board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_WNR2000_V3
-+ bool "NETGEAR WNR2000 V3/WNR612 v2 board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+ config ATH79_MACH_WNR2200
-+ bool "NETGEAR WNR2200 board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_OM2P
-+ bool "OpenMesh OM2P board support"
-+ select SOC_AR724X
-+ select SOC_AR933X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MR600
-+ bool "OpenMesh MR600 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MZK_W04NU
-+ bool "Planex MZK-W04NU board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_MZK_W300NH
-+ bool "Planex MZK-W300NH board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_RW2458N
-+ bool "Redwave RW2458N board support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_CAP4200AG
-+ bool "Senao CAP4200AG support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_EAP7660D
-+ bool "Senao EAP7660D support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_ARCHER_C7
-+ bool "TP-LINK Archer C7 board support"
-+ select SOC_QCA955X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_MR11U
-+ bool "TP-LINK TL-MR11U/TL-MR3040 support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-
--config ATH79_MACH_AP136
-- bool "Atheros AP136/AP135 reference board"
-- select SOC_QCA955X
-+config ATH79_MACH_TL_MR13U
-+ bool "TP-LINK TL-MR13U support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_NFC
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP136 or AP135 reference boards.
-
--config ATH79_MACH_AP81
-- bool "Atheros AP81 reference board"
-+config ATH79_MACH_TL_MR3020
-+ bool "TP-LINK TL-MR3020 support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_MR3X20
-+ bool "TP-LINK TL-MR3220/3420 support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_TL_WAX50RE
-+ bool "TP-LINK TL-WA750/850RE support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WA901ND
-+ bool "TP-LINK TL-WA901ND/TL-WA7510N support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TL_WA901ND_V2
-+ bool "TP-LINK TL-WA901ND v2 support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WDR3500
-+ bool "TP-LINK TL-WDR3500 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP81 reference board.
-
--config ATH79_MACH_DB120
-- bool "Atheros DB120 reference board"
-+config ATH79_MACH_TL_WDR4300
-+ bool "TP-LINK TL-WDR3600/4300/4310 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros DB120 reference board.
-
--config ATH79_MACH_PB44
-- bool "Atheros PB44 reference board"
-+config ATH79_MACH_TL_WR703N
-+ bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR720N_V3
-+ bool "TP-LINK TL-WR720N v3 support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR741ND
-+ bool "TP-LINK TL-WR741ND support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TL_WR741ND_V4
-+ bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR841N_V1
-+ bool "TP-LINK TL-WR841N v1 support"
- select SOC_AR71XX
-+ select ATH79_DEV_DSA
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_TL_WR841N_V8
-+ bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR941ND
-+ bool "TP-LINK TL-WR941ND support"
-+ select SOC_AR913X
-+ select ATH79_DEV_DSA
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR1041N_V2
-+ bool "TP-LINK TL-WR1041N v2 support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR1043ND
-+ bool "TP-LINK TL-WR1043ND support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR1043ND_V2
-+ bool "TP-LINK TL-WR1043ND v2 support"
-+ select SOC_QCA955X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_TL_WR2543N
-+ bool "TP-LINK TL-WR2543N/ND support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+
-+config ATH79_MACH_TEW_632BRP
-+ bool "TRENDnet TEW-632BRP support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_TEW_673GRU
-+ bool "TRENDnet TEW-673GRU support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_TEW_712BR
-+ bool "TRENDnet TEW-712BR support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_TEW_732BR
-+ bool "TRENDnet TEW-732BR support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_UBNT
-+ bool "Ubiquiti AR71xx based boards support"
-+ select SOC_AR71XX
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros PB44 reference board.
-
- config ATH79_MACH_UBNT_XM
- bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +810,65 @@ config ATH79_MACH_UBNT_XM
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
-
-+config ATH79_MACH_MYNET_N600
-+ bool "WD My Net N600 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_MYNET_REXT
-+ bool "WD My Net Wi-Fi Range Extender board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
-+config ATH79_MACH_ZCN_1523H
-+ bool "Zcomax ZCN-1523H support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+
-+config ATH79_MACH_NBG460N
-+ bool "Zyxel NBG460N/550N/550NH board support"
-+ select SOC_AR913X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_CARAMBOLA2
-+ bool "8devices Carambola2 board"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_BHU_BXU2000N2_A
-+ bool "BHU BXU2000n-2 rev. A support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- endmenu
-
- config SOC_AR71XX
-@@ -132,7 +918,10 @@ config ATH79_DEV_DSA
- config ATH79_DEV_ETH
- def_bool n
-
--config PCI_AR724X
-+config ATH79_DEV_DSA
-+ def_bool n
-+
-+config ATH79_DEV_ETH
- def_bool n
-
- config ATH79_DEV_GPIO_BUTTONS
-@@ -164,4 +953,7 @@ config ATH79_PCI_ATH9K_FIXUP
- config ATH79_ROUTERBOOT
- def_bool n
-
-+config PCI_AR724X
-+ def_bool n
-+
- endif
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,90 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
- #
- # Machines
- #
-+obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o
-+obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
-+obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
-+obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
-+obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
- obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
-+obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
- obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
- obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
-+obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
-+obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
-+obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
-+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
-+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
-+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
- obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
-+obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
-+obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
-+obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
-+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
-+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
-+obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
-+obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
-+obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
-+obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
-+obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
-+obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
-+obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
-+obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
-+obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
-+obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
- obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
-+obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
-+obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
-+obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
-+obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
-+obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
-+obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
-+obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
-+obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
-+obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
-+obj-$(CONFIG_ATH79_MACH_TEW_732BR) += mach-tew-732br.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
-+obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
-+obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o
-+obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
-+obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o
-+obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
- obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
-+obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
-+obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
-+obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o
-+obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o
-+obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
-+obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
-+obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
-+obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
-+obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
-+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
-+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
-+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
-+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
-+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
-+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
-+obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -180,6 +180,12 @@ void __init prom_init(void)
- ath79_prom_append_cmdline("board", env);
- }
- }
-+
-+ if (strstr(arcs_cmdline, "board=750Gr3") ||
-+ strstr(arcs_cmdline, "board=951G") ||
-+ strstr(arcs_cmdline, "board=2011L") ||
-+ strstr(arcs_cmdline, "board=711Gr100"))
-+ ath79_prom_append_cmdline("console", "ttyS0,115200");
- }
-
- void __init prom_free_prom_memory(void)
+++ /dev/null
-MIPS: ath79: fix maximum timeout
-
-If the userland tries to set a timeout higher than the max_timeout, then we should fallback to max_timeout.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-
---- a/drivers/watchdog/ath79_wdt.c
-+++ b/drivers/watchdog/ath79_wdt.c
-@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi
-
- static int ath79_wdt_set_timeout(int val)
- {
-- if (val < 1 || val > max_timeout)
-+ if (val < 1)
- return -EINVAL;
-
-- timeout = val;
-+ if (val > max_timeout)
-+ timeout = max_timeout;
-+ else
-+ timeout = val;
-+
- ath79_wdt_keepalive();
-
- return 0;
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -306,6 +306,11 @@ void __init ath79_wmac_disable_5ghz(void
- ath79_wmac_data.disable_5ghz = true;
- }
-
-+void __init ath79_wmac_set_tx_gain_buffalo(void)
-+{
-+ ath79_wmac_data.tx_gain_buffalo = true;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -16,6 +16,7 @@ void ath79_register_wmac(u8 *cal_data, u
- void ath79_register_wmac_simple(void);
- void ath79_wmac_disable_2ghz(void);
- void ath79_wmac_disable_5ghz(void);
-+void ath79_wmac_set_tx_gain_buffalo(void);
-
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -18,9 +18,11 @@
- #include <linux/etherdevice.h>
- #include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/gpio.h>
-
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-+#include "common.h"
- #include "dev-wmac.h"
-
- static u8 ath79_wmac_mac[ETH_ALEN];
-@@ -311,6 +313,51 @@ void __init ath79_wmac_set_tx_gain_buffa
- ath79_wmac_data.tx_gain_buffalo = true;
- }
-
-+static int ath79_request_ext_lna_gpio(unsigned chain, int gpio)
-+{
-+ char buf[32];
-+ char *label;
-+ int err;
-+
-+ scnprintf(buf, sizeof(buf), "external LNA%u", chain);
-+ label = kstrdup(buf, GFP_KERNEL);
-+
-+ err = gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label);
-+ if (err) {
-+ pr_err("unable to request GPIO%d for external LNA%u\n",
-+ gpio, chain);
-+ kfree(label);
-+ }
-+
-+ return err;
-+}
-+
-+static void ar934x_set_ext_lna_gpio(unsigned chain, int gpio)
-+{
-+ unsigned int sel;
-+ int err;
-+
-+ if (WARN_ON(chain > 1))
-+ return;
-+
-+ err = ath79_request_ext_lna_gpio(chain, gpio);
-+ if (err)
-+ return;
-+
-+ if (chain == 0)
-+ sel = AR934X_GPIO_OUT_EXT_LNA0;
-+ else
-+ sel = AR934X_GPIO_OUT_EXT_LNA1;
-+
-+ ath79_gpio_output_select(gpio, sel);
-+}
-+
-+void __init ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio)
-+{
-+ if (soc_is_ar934x())
-+ ar934x_set_ext_lna_gpio(chain, gpio);
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -17,6 +17,7 @@ void ath79_register_wmac_simple(void);
- void ath79_wmac_disable_2ghz(void);
- void ath79_wmac_disable_5ghz(void);
- void ath79_wmac_set_tx_gain_buffalo(void);
-+void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio);
-
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
+++ /dev/null
---- a/arch/mips/ath79/mach-ap81.c
-+++ b/arch/mips/ath79/mach-ap81.c
-@@ -33,37 +33,6 @@
-
- #define AP81_CAL_DATA_ADDR 0x1fff1000
-
--static struct mtd_partition ap81_partitions[] = {
-- {
-- .name = "u-boot",
-- .offset = 0,
-- .size = 0x040000,
-- .mask_flags = MTD_WRITEABLE,
-- }, {
-- .name = "u-boot-env",
-- .offset = 0x040000,
-- .size = 0x010000,
-- }, {
-- .name = "rootfs",
-- .offset = 0x050000,
-- .size = 0x500000,
-- }, {
-- .name = "uImage",
-- .offset = 0x550000,
-- .size = 0x100000,
-- }, {
-- .name = "ART",
-- .offset = 0x650000,
-- .size = 0x1b0000,
-- .mask_flags = MTD_WRITEABLE,
-- }
--};
--
--static struct flash_platform_data ap81_flash_data = {
-- .parts = ap81_partitions,
-- .nr_parts = ARRAY_SIZE(ap81_partitions),
--};
--
- static struct gpio_led ap81_leds_gpio[] __initdata = {
- {
- .name = "ap81:green:status",
-@@ -111,7 +80,7 @@ static void __init ap81_setup(void)
- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap81_gpio_keys),
- ap81_gpio_keys);
-- ath79_register_m25p80(&ap81_flash_data);
-+ ath79_register_m25p80(NULL);
- ath79_register_wmac(cal_data, NULL);
- ath79_register_usb();
-
+++ /dev/null
---- a/arch/mips/ath79/mach-ap83.c
-+++ b/arch/mips/ath79/mach-ap83.c
-@@ -42,41 +42,8 @@
- #define AP83_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL)
-
--static struct mtd_partition ap83_flash_partitions[] = {
-- {
-- .name = "u-boot",
-- .offset = 0,
-- .size = 0x040000,
-- .mask_flags = MTD_WRITEABLE,
-- }, {
-- .name = "u-boot-env",
-- .offset = 0x040000,
-- .size = 0x020000,
-- .mask_flags = MTD_WRITEABLE,
-- }, {
-- .name = "kernel",
-- .offset = 0x060000,
-- .size = 0x140000,
-- }, {
-- .name = "rootfs",
-- .offset = 0x1a0000,
-- .size = 0x650000,
-- }, {
-- .name = "art",
-- .offset = 0x7f0000,
-- .size = 0x010000,
-- .mask_flags = MTD_WRITEABLE,
-- }, {
-- .name = "firmware",
-- .offset = 0x060000,
-- .size = 0x790000,
-- }
--};
--
- static struct physmap_flash_data ap83_flash_data = {
- .width = 2,
-- .parts = ap83_flash_partitions,
-- .nr_parts = ARRAY_SIZE(ap83_flash_partitions),
- };
-
- static struct resource ap83_flash_resources[] = {
+++ /dev/null
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -332,3 +332,78 @@ static void __init ubnt_uap_pro_setup(vo
- MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
- ubnt_uap_pro_setup);
-
-+#define UBNT_XW_GPIO_LED_L1 11
-+#define UBNT_XW_GPIO_LED_L2 16
-+#define UBNT_XW_GPIO_LED_L3 13
-+#define UBNT_XW_GPIO_LED_L4 14
-+
-+static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
-+ {
-+ .name = "ubnt:red:link1",
-+ .gpio = UBNT_XW_GPIO_LED_L1,
-+ .active_low = 1,
-+ }, {
-+ .name = "ubnt:orange:link2",
-+ .gpio = UBNT_XW_GPIO_LED_L2,
-+ .active_low = 1,
-+ }, {
-+ .name = "ubnt:green:link3",
-+ .gpio = UBNT_XW_GPIO_LED_L3,
-+ .active_low = 1,
-+ }, {
-+ .name = "ubnt:green:link4",
-+ .gpio = UBNT_XW_GPIO_LED_L4,
-+ .active_low = 1,
-+ },
-+};
-+
-+static void __init ubnt_xw_init(void)
-+{
-+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
-+ ubnt_xw_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ubnt_xm_gpio_keys),
-+ ubnt_xm_gpio_keys);
-+
-+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
-+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-+
-+
-+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
-+ ath79_init_mac(ath79_eth0_data.mac_addr,
-+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
-+
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+}
-+
-+static void __init ubnt_nano_m_xw_setup(void)
-+{
-+ ubnt_xw_init();
-+
-+ /* GMAC0 is connected to an AR8326 switch */
-+ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
-+ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
-+ ath79_eth0_data.speed = SPEED_100;
-+ ath79_eth0_data.duplex = DUPLEX_FULL;
-+ ath79_register_eth(0);
-+}
-+
-+static void __init ubnt_loco_m_xw_setup(void)
-+{
-+ ubnt_xw_init();
-+
-+ ath79_register_mdio(0, ~BIT(1));
-+ ath79_eth0_data.phy_mask = BIT(1);
-+ ath79_register_eth(0);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
-+ ubnt_nano_m_xw_setup);
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
-+ ubnt_loco_m_xw_setup);
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -121,9 +121,11 @@ enum ath79_mach_type {
- ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
- ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
- ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
-+ ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
- ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
- ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
- ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
-+ ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */
- ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
- ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
- ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -470,6 +470,16 @@ config ATH79_MACH_WNR2000_V3
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-+config ATH79_MACH_WNR2000_V4
-+ bool "NETGEAR WNR2000 V4"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_OM2P
- bool "OpenMesh OM2P board support"
- select SOC_AR724X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -113,6 +113,7 @@ obj-$(CONFIG_ATH79_MACH_WNDR3700) += mac
- obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
- obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
- obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
-+obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
- obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
- obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
- obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -138,6 +138,7 @@ enum ath79_mach_type {
- ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
- ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
- ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */
-+ ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */
- ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
- ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
- ATH79_MACH_WP543, /* Compex WP543 */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -101,6 +101,7 @@ enum ath79_mach_type {
- ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */
- ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/
- ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */
-+ ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */
- ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
- ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
- ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -104,6 +104,7 @@ enum ath79_mach_type {
- ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */
- ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
- ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
-+ ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
- ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
- ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
- ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -57,6 +57,7 @@ enum ath79_mach_type {
- ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
- ATH79_MACH_MR600, /* OpenMesh MR600 */
- ATH79_MACH_MYNET_N600, /* WD My Net N600 */
-+ ATH79_MACH_MYNET_N750, /* WD My Net N750 */
- ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */
- ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
- ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -820,6 +820,16 @@ config ATH79_MACH_MYNET_N600
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-+config ATH79_MACH_MYNET_N750
-+ bool "WD My Net N750 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_NVRAM
-+
- config ATH79_MACH_MYNET_REXT
- bool "WD My Net Wi-Fi Range Extender board support"
- select SOC_AR934X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -67,6 +67,7 @@ obj-$(CONFIG_ATH79_MACH_JWAP003) += mach
- obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
- obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
- obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
-+obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o
- obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
- obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
- obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -76,6 +76,7 @@ enum ath79_mach_type {
- ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
- ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
- ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
-+ ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */
- ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
- ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
- ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -391,6 +391,16 @@ config ATH79_MACH_RB750
- select ATH79_ROUTERBOOT
- select RLE_DECOMPRESS
-
-+config ATH79_MACH_RB91X
-+ bool "MikroTik RouterBOARD 91X support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_SPI
-+ select ATH79_DEV_WMAC
-+ select ATH79_DEV_USB
-+ select ATH79_ROUTERBOOT
-+ select RLE_DECOMPRESS
-+
- config ATH79_MACH_RB95X
- bool "MikroTik RouterBOARD 95X support"
- select SOC_AR934X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -78,6 +78,7 @@ obj-$(CONFIG_ATH79_MACH_PB44) += mach-p
- obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
- obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
- obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
-+obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
- obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
- obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
- obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -109,6 +109,7 @@ enum ath79_mach_type {
- ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
- ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
- ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
-+ ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */
- ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
- ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
- ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -549,8 +549,9 @@ config ATH79_MACH_EAP7660D
- select ATH79_DEV_M25P80
-
- config ATH79_MACH_ARCHER_C7
-- bool "TP-LINK Archer C7 board support"
-+ bool "TP-LINK Archer C7/TL-WDR4900 v2 board support"
- select SOC_QCA955X
-+ select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -82,6 +82,7 @@ enum ath79_mach_type {
- ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
- ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
- ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
-+ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
- ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
- ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
- ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -50,6 +50,7 @@ enum ath79_mach_type {
- ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
- ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
- ATH79_MACH_EAP7660D, /* Senao EAP7660D */
-+ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
- ATH79_MACH_JA76PF, /* jjPlus JA76PF */
- ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
- ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -337,6 +337,16 @@ config ATH79_MACH_EW_DORIN
- Say 'Y' here if you want your kernel to support the
- Dorin Platform from www.80211.de .
-
-+config ATH79_MACH_GS_OOLITE
-+ bool "GS Oolite V1 support"
-+ select SOC_AR933X
-+ select ARH79_DEV_ETH
-+ select ARH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_JA76PF
- bool "jjPlus JA76PF board support"
- select SOC_AR71XX
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += m
- obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
- obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
- obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
-+obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
- obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
- obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
- obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
+++ /dev/null
-From 5300a7cd7ed2f88488ddba62947b9c6bb9663777 Mon Sep 17 00:00:00 2001
-Message-Id: <5300a7cd7ed2f88488ddba62947b9c6bb9663777.1396122227.git.mschiffer@universe-factory.net>
-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Sat, 29 Mar 2014 20:26:08 +0100
-Subject: [PATCH 1/2] MIPS: ath79: add support for QCA953x SoC
-
-Note that the clock calculation looks very similar to the QCA955x, but the
-meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
----
- arch/mips/ath79/Kconfig | 6 +-
- arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++++
- arch/mips/ath79/common.c | 4 ++
- arch/mips/ath79/dev-common.c | 1 +
- arch/mips/ath79/dev-wmac.c | 20 +++++++
- arch/mips/ath79/early_printk.c | 1 +
- arch/mips/ath79/gpio.c | 4 +-
- arch/mips/ath79/irq.c | 4 ++
- arch/mips/ath79/setup.c | 8 ++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 48 ++++++++++++++++
- arch/mips/include/asm/mach-ath79/ath79.h | 11 ++++
- 11 files changed, 182 insertions(+), 3 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -929,6 +929,10 @@ config SOC_AR934X
- select PCI_AR724X if PCI
- def_bool n
-
-+config SOC_QCA953X
-+ select USB_ARCH_HAS_EHCI
-+ def_bool n
-+
- config SOC_QCA955X
- select USB_ARCH_HAS_EHCI
- select HW_HAS_PCI
-@@ -972,7 +976,7 @@ config ATH79_DEV_USB
- def_bool n
-
- config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
- def_bool n
-
- config ATH79_NVRAM
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -295,6 +295,82 @@ static void __init ar934x_clocks_init(vo
- iounmap(dpll_base);
- }
-
-+static void __init qca953x_clocks_init(void)
-+{
-+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
-+ u32 cpu_pll, ddr_pll;
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
-+ if (bootstrap & QCA953X_BOOTSTRAP_REF_CLK_40)
-+ ath79_ref_clk.rate = 40 * 1000 * 1000;
-+ else
-+ ath79_ref_clk.rate = 25 * 1000 * 1000;
-+
-+ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
-+ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_REFDIV_MASK;
-+ nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_NINT_MASK;
-+ frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_NFRAC_MASK;
-+
-+ cpu_pll = nint * ath79_ref_clk.rate / ref_div;
-+ cpu_pll += frac * (ath79_ref_clk.rate >> 6) / ref_div;
-+ cpu_pll /= (1 << out_div);
-+
-+ pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
-+ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_REFDIV_MASK;
-+ nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_NINT_MASK;
-+ frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_NFRAC_MASK;
-+
-+ ddr_pll = nint * ath79_ref_clk.rate / ref_div;
-+ ddr_pll += frac * (ath79_ref_clk.rate >> 6) / (ref_div << 4);
-+ ddr_pll /= (1 << out_div);
-+
-+ clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-+ ath79_cpu_clk.rate = ath79_ref_clk.rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-+ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
-+ else
-+ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-+ ath79_ddr_clk.rate = ath79_ref_clk.rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-+ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
-+ else
-+ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-+ ath79_ahb_clk.rate = ath79_ref_clk.rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
-+ else
-+ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
-+
-+ ath79_wdt_clk.rate = ath79_ref_clk.rate;
-+ ath79_uart_clk.rate = ath79_ref_clk.rate;
-+}
-+
- static void __init qca955x_clocks_init(void)
- {
- u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
-@@ -383,6 +459,8 @@ void __init ath79_clocks_init(void)
- ar933x_clocks_init();
- else if (soc_is_ar934x())
- ar934x_clocks_init();
-+ else if (soc_is_qca953x())
-+ qca953x_clocks_init();
- else if (soc_is_qca955x())
- qca955x_clocks_init();
- else
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -73,6 +73,8 @@ void ath79_device_reset_set(u32 mask)
- reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
- reg = AR934X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca953x())
-+ reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-@@ -101,6 +103,8 @@ void ath79_device_reset_clear(u32 mask)
- reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
- reg = AR934X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca953x())
-+ reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -100,6 +100,7 @@ void __init ath79_register_uart(void)
- soc_is_ar724x() ||
- soc_is_ar913x() ||
- soc_is_ar934x() ||
-+ soc_is_qca953x() ||
- soc_is_qca955x()) {
- ath79_uart_data[0].uartclk = clk_get_rate(clk);
- platform_device_register(&ath79_uart_device);
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -101,7 +101,7 @@ static int ar933x_wmac_reset(void)
- return -ETIMEDOUT;
- }
-
--static int ar933x_r1_get_wmac_revision(void)
-+static int ar93xx_get_soc_revision(void)
- {
- return ath79_soc_rev;
- }
-@@ -126,7 +126,7 @@ static void __init ar933x_wmac_setup(voi
- ath79_wmac_data.is_clk_25mhz = true;
-
- if (ath79_soc_rev == 1)
-- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
-
- ath79_wmac_data.external_reset = ar933x_wmac_reset;
- }
-@@ -149,6 +149,26 @@ static void ar934x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = true;
- }
-
-+static void qca953x_wmac_setup(void)
-+{
-+ u32 t;
-+
-+ ath79_wmac_device.name = "qca953x_wmac";
-+
-+ ath79_wmac_resources[0].start = QCA953X_WMAC_BASE;
-+ ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1;
-+ ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
-+ ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
-+
-+ t = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
-+ if (t & QCA953X_BOOTSTRAP_REF_CLK_40)
-+ ath79_wmac_data.is_clk_25mhz = false;
-+ else
-+ ath79_wmac_data.is_clk_25mhz = true;
-+
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
-+}
-+
- static void qca955x_wmac_setup(void)
- {
- u32 t;
-@@ -366,6 +386,8 @@ void __init ath79_register_wmac(u8 *cal_
- ar933x_wmac_setup();
- else if (soc_is_ar934x())
- ar934x_wmac_setup();
-+ else if (soc_is_qca953x())
-+ qca953x_wmac_setup();
- else if (soc_is_qca955x())
- qca955x_wmac_setup();
- else
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -114,6 +114,7 @@ static void prom_putchar_init(void)
- case REV_ID_MAJOR_AR9341:
- case REV_ID_MAJOR_AR9342:
- case REV_ID_MAJOR_AR9344:
-+ case REV_ID_MAJOR_QCA9533:
- case REV_ID_MAJOR_QCA9556:
- case REV_ID_MAJOR_QCA9558:
- _prom_putchar = prom_putchar_ar71xx;
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -224,6 +224,8 @@ void __init ath79_gpio_init(void)
- ath79_gpio_count = AR933X_GPIO_COUNT;
- else if (soc_is_ar934x())
- ath79_gpio_count = AR934X_GPIO_COUNT;
-+ else if (soc_is_qca953x())
-+ ath79_gpio_count = QCA953X_GPIO_COUNT;
- else if (soc_is_qca955x())
- ath79_gpio_count = QCA955X_GPIO_COUNT;
- else
-@@ -231,7 +233,7 @@ void __init ath79_gpio_init(void)
-
- ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
- ath79_gpio_chip.ngpio = ath79_gpio_count;
-- if (soc_is_ar934x() || soc_is_qca955x()) {
-+ if (soc_is_ar934x() || soc_is_qca953x() || soc_is_qca955x()) {
- ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
- ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
- }
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -106,6 +106,7 @@ static void __init ath79_misc_irq_init(v
- else if (soc_is_ar724x() ||
- soc_is_ar933x() ||
- soc_is_ar934x() ||
-+ soc_is_qca953x() ||
- soc_is_qca955x())
- ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
- else
-@@ -352,6 +353,9 @@ void __init arch_init_irq(void)
- } else if (soc_is_ar934x()) {
- ath79_ip2_handler = ath79_default_ip2_handler;
- ath79_ip3_handler = ar934x_ip3_handler;
-+ } else if (soc_is_qca953x()) {
-+ ath79_ip2_handler = ath79_default_ip2_handler;
-+ ath79_ip3_handler = ath79_default_ip3_handler;
- } else if (soc_is_qca955x()) {
- ath79_ip2_handler = ath79_default_ip2_handler;
- ath79_ip3_handler = ath79_default_ip3_handler;
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -151,6 +151,12 @@ static void __init ath79_detect_sys_type
- rev = id & AR934X_REV_ID_REVISION_MASK;
- break;
-
-+ case REV_ID_MAJOR_QCA9533:
-+ ath79_soc = ATH79_SOC_QCA9533;
-+ chip = "9533";
-+ rev = id & QCA953X_REV_ID_REVISION_MASK;
-+ break;
-+
- case REV_ID_MAJOR_QCA9556:
- ath79_soc = ATH79_SOC_QCA9556;
- chip = "9556";
-@@ -169,7 +175,7 @@ static void __init ath79_detect_sys_type
-
- ath79_soc_rev = rev;
-
-- if (soc_is_qca955x())
-+ if (soc_is_qca953x() || soc_is_qca955x())
- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
- chip, rev);
- else
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -106,6 +106,9 @@
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-
-+#define QCA953X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-+#define QCA953X_WMAC_SIZE 0x20000
-+
- #define QCA955X_PCI_MEM_BASE0 0x10000000
- #define QCA955X_PCI_MEM_BASE1 0x12000000
- #define QCA955X_PCI_MEM_SIZE 0x02000000
-@@ -280,6 +283,43 @@
-
- #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
-
-+#define QCA953X_PLL_CPU_CONFIG_REG 0x00
-+#define QCA953X_PLL_DDR_CONFIG_REG 0x04
-+#define QCA953X_PLL_CLK_CTRL_REG 0x08
-+#define QCA953X_PLL_ETH_XMII_CONTROL_REG 0x2c
-+#define QCA953X_PLL_ETH_SGMII_CONTROL_REG 0x48
-+
-+#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
-+#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-+#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT 6
-+#define QCA953X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-+#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-+#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
-+
-+#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
-+#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
-+#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT 10
-+#define QCA953X_PLL_DDR_CONFIG_NINT_MASK 0x3f
-+#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-+#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-+#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-+#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
-+#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
-+#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-+
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-@@ -356,6 +396,10 @@
- #define AR934X_RESET_REG_BOOTSTRAP 0xb0
- #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
-+#define QCA953X_RESET_REG_RESET_MODULE 0x1c
-+#define QCA953X_RESET_REG_BOOTSTRAP 0xb0
-+#define QCA953X_RESET_REG_EXT_INT_STATUS 0xac
-+
- #define QCA955X_RESET_REG_RESET_MODULE 0x1c
- #define QCA955X_RESET_REG_BOOTSTRAP 0xb0
- #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-@@ -504,6 +548,8 @@
- #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
- #define AR934X_BOOTSTRAP_DDR1 BIT(0)
-
-+#define QCA953X_BOOTSTRAP_REF_CLK_40 BIT(4)
-+
- #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
-
- #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
-@@ -566,6 +612,7 @@
- #define REV_ID_MAJOR_AR9341 0x0120
- #define REV_ID_MAJOR_AR9342 0x1120
- #define REV_ID_MAJOR_AR9344 0x2120
-+#define REV_ID_MAJOR_QCA9533 0x0140
- #define REV_ID_MAJOR_QCA9556 0x0130
- #define REV_ID_MAJOR_QCA9558 0x1130
-
-@@ -588,6 +635,8 @@
-
- #define AR934X_REV_ID_REVISION_MASK 0xf
-
-+#define QCA953X_REV_ID_REVISION_MASK 0xf
-+
- #define QCA955X_REV_ID_REVISION_MASK 0xf
-
- /*
-@@ -641,6 +690,7 @@
- #define AR913X_GPIO_COUNT 22
- #define AR933X_GPIO_COUNT 30
- #define AR934X_GPIO_COUNT 23
-+#define QCA953X_GPIO_COUNT 24
- #define QCA955X_GPIO_COUNT 24
-
- /*
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -32,6 +32,7 @@ enum ath79_soc_type {
- ATH79_SOC_AR9341,
- ATH79_SOC_AR9342,
- ATH79_SOC_AR9344,
-+ ATH79_SOC_QCA9533,
- ATH79_SOC_QCA9556,
- ATH79_SOC_QCA9558,
- };
-@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void)
- return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
- }
-
-+static inline int soc_is_qca9533(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA9533;
-+}
-+
-+static inline int soc_is_qca953x(void)
-+{
-+ return soc_is_qca9533();
-+}
-+
- static inline int soc_is_qca9556(void)
- {
- return ath79_soc == ATH79_SOC_QCA9556;
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -716,6 +716,15 @@ config ATH79_MACH_TL_WR841N_V8
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-+config ATH79_MACH_TL_WR841N_V9
-+ bool "TP-LINK TL-WR841N/ND v9 support"
-+ select SOC_QCA953X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_TL_WR941ND
- bool "TP-LINK TL-WR941ND support"
- select SOC_AR913X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -100,6 +100,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += m
- obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
- obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
- obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
-+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o
- obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
- obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
- obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -124,6 +124,7 @@ enum ath79_mach_type {
- ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
- ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */
- ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */
-+ ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */
- ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
- ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
- ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
+++ /dev/null
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mac
- obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
- obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
- obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
-+obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
- obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
- obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
- obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -51,6 +51,7 @@ enum ath79_mach_type {
- ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
- ATH79_MACH_EAP7660D, /* Senao EAP7660D */
- ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
-+ ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
- ATH79_MACH_JA76PF, /* jjPlus JA76PF */
- ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
- ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -347,6 +347,16 @@ config ATH79_MACH_GS_OOLITE
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-+config ATH79_MACH_HIWIFI_HC6361
-+ bool "HiWiFi HC6361 board support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_JA76PF
- bool "jjPlus JA76PF board support"
- select SOC_AR71XX
+++ /dev/null
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -130,3 +130,4 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) +
- obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
- obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
- obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
-+obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -64,6 +64,7 @@ enum ath79_mach_type {
- ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
- ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
- ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
-+ ATH79_MACH_NBG6716, /* Zyxel NBG6716 */
- ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
- ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
- ATH79_MACH_OM2P, /* OpenMesh OM2P */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -899,6 +899,17 @@ config ATH79_MACH_NBG460N
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-+config ATH79_MACH_NBG6716
-+ bool "Zyxel NBG6716 board support"
-+ select SOC_QCA955X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_NFC
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_CARAMBOLA2
- bool "8devices Carambola2 board"
- select SOC_AR933X
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -67,6 +67,7 @@ enum ath79_mach_type {
- ATH79_MACH_NBG6716, /* Zyxel NBG6716 */
- ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
- ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
-+ ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */
- ATH79_MACH_OM2P, /* OpenMesh OM2P */
- ATH79_MACH_PB42, /* Atheros PB42 */
- ATH79_MACH_PB92, /* Atheros PB92 */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -65,6 +65,7 @@ enum ath79_mach_type {
- ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
- ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
- ATH79_MACH_NBG6716, /* Zyxel NBG6716 */
-+ ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */
- ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
- ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
- ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -50,6 +50,8 @@ enum ath79_mach_type {
- ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
- ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
- ATH79_MACH_EAP7660D, /* Senao EAP7660D */
-+ ATH79_MACH_EL_M150, /* EasyLink EL-M150 */
-+ ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */
- ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
- ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
- ATH79_MACH_JA76PF, /* jjPlus JA76PF */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -337,6 +337,26 @@ config ATH79_MACH_EW_DORIN
- Say 'Y' here if you want your kernel to support the
- Dorin Platform from www.80211.de .
-
-+config ATH79_MACH_EL_M150
-+ bool "EasyLink EL-M150 support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_EL_MINI
-+ bool "EasyLink EL-MINI support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_GS_OOLITE
- bool "GS Oolite V1 support"
- select SOC_AR933X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -62,6 +62,8 @@ obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += m
- obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
- obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
- obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
-+obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
-+obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
- obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
- obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
- obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -462,6 +462,14 @@ config ATH79_MACH_RB2011
- select ATH79_ROUTERBOOT
- select RLE_DECOMPRESS
-
-+config ATH79_MACH_RBSXTLITE
-+ bool "MikroTik RouterBOARD SXT Lite"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_NFC
-+ select ATH79_DEV_WMAC
-+ select ATH79_ROUTERBOOT
-+
- config ATH79_MACH_WNDAP360
- bool "NETGEAR WNDAP360 board support"
- select SOC_AR71XX
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -93,6 +93,8 @@ enum ath79_mach_type {
- ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
- ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
- ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */
-+ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
-+ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
- ATH79_MACH_RW2458N, /* Redwave RW2458N */
- ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
- ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -85,6 +85,7 @@ obj-$(CONFIG_ATH79_MACH_RB750) += mach-
- obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
- obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
- obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
-+obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
- obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
- obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
- obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -656,6 +656,16 @@ config ATH79_MACH_TL_WAX50RE
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-+config ATH79_MACH_TL_WA830RE_V2
-+ bool "TP-LINK TL-WA830RE v2 support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_TL_WA901ND
- bool "TP-LINK TL-WA901ND/TL-WA7510N support"
- select SOC_AR724X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -96,6 +96,7 @@ obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mac
- obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
- obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
- obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o
-+obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o
- obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
- obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
- obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -114,6 +114,7 @@ enum ath79_mach_type {
- ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/
- ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */
- ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */
-+ ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */
- ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
- ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
- ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -113,6 +113,7 @@ enum ath79_mach_type {
- ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */
- ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/
- ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */
-+ ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */
- ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */
- ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */
- ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
+++ /dev/null
---- a/arch/mips/ath79/mach-rb2011.c
-+++ b/arch/mips/ath79/mach-rb2011.c
-@@ -321,6 +321,13 @@ static void __init rb2011us_setup(void)
-
- MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US, "2011US", rb2011us_setup);
-
-+static void __init rb2011r5_setup(void)
-+{
-+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB);
-+}
-+
-+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup);
-+
- static void __init rb2011g_setup(void)
- {
- rb2011_setup(RB2011_FLAG_SFP |
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -93,6 +93,7 @@ enum ath79_mach_type {
- ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
- ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
- ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */
-+ ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS */
- ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
- ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
- ATH79_MACH_RW2458N, /* Redwave RW2458N */
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -357,6 +357,16 @@ config ATH79_MACH_EL_MINI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-+config ATH79_MACH_GL_INET
-+ bool "GL-INET support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_GS_OOLITE
- bool "GS Oolite V1 support"
- select SOC_AR933X
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -52,6 +52,7 @@ enum ath79_mach_type {
- ATH79_MACH_EAP7660D, /* Senao EAP7660D */
- ATH79_MACH_EL_M150, /* EasyLink EL-M150 */
- ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */
-+ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
- ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
- ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
- ATH79_MACH_JA76PF, /* jjPlus JA76PF */
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mac
- obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
- obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
- obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
-+obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
- obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
- obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
- obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -177,6 +177,16 @@ config ATH79_MACH_AW_NR580
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-+config ATH79_MACH_ESR1750
-+ bool "EnGenius ESR1750 board support"
-+ select SOC_QCA955X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_WHR_HP_G300N
- bool "Buffalo WHR-HP-G300N board support"
- select SOC_AR724X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -64,6 +64,7 @@ obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mac
- obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
- obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
- obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
-+obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
- obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
- obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
- obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -52,6 +52,7 @@ enum ath79_mach_type {
- ATH79_MACH_EAP7660D, /* Senao EAP7660D */
- ATH79_MACH_EL_M150, /* EasyLink EL-M150 */
- ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */
-+ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
- ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
- ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
- ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -47,6 +47,7 @@ enum ath79_mach_type {
- ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
- ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */
- ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
-+ ATH79_MACH_ESR900, /* EnGenius ESR900 */
- ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
- ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
- ATH79_MACH_EAP7660D, /* Senao EAP7660D */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -335,6 +335,16 @@ config ATH79_MACH_DRAGINO2
- select ATH79_DEV_ETH
- select ATH79_DEV_USB
-
-+config ATH79_MACH_ESR900
-+ bool "EnGenius ESR900 board support"
-+ select SOC_QCA955X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_EW_DORIN
- bool "embedded wireless Dorin Platform support"
- select SOC_AR933X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -60,6 +60,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += m
- obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
- obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
- obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
-+obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o
- obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
- obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
- obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -141,6 +141,7 @@ enum ath79_mach_type {
- ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */
- ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
- ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
-+ ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */
- ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
- ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
- ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -29,6 +29,15 @@ config ATH79_MACH_ALFA_NX
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-+config ATH79_MACH_TUBE2H
-+ bool "ALFA Network Tube2H board support"
-+ select SOC_AR933X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_ALL0258N
- bool "Allnet ALL0258N support"
- select SOC_AR724X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -116,6 +116,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2)
- obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
- obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
- obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o
-+obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o
- obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
- obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
- obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -50,6 +50,7 @@ enum ath79_mach_type {
- ATH79_MACH_ESR900, /* EnGenius ESR900 */
- ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
- ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
-+ ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */
- ATH79_MACH_EAP7660D, /* Senao EAP7660D */
- ATH79_MACH_EL_M150, /* EasyLink EL-M150 */
- ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -396,6 +396,15 @@ config ATH79_MACH_GL_INET
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-+config ATH79_MACH_EAP300V2
-+ bool "EnGenius EAP300 v2 support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_GS_OOLITE
- bool "GS Oolite V1 support"
- select SOC_AR933X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += m
- obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
- obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o
- obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
-+obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o
- obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
- obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
- obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
+++ /dev/null
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -17,9 +17,11 @@
- #include <linux/etherdevice.h>
- #include <linux/ar8216_platform.h>
-
-+#include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/irq.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-
-+#include "common.h"
- #include "dev-ap9x-pci.h"
- #include "dev-eth.h"
- #include "dev-gpio-buttons.h"
-@@ -407,3 +409,65 @@ MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW,
-
- MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
- ubnt_loco_m_xw_setup);
-+
-+static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
-+ {
-+ .name = "ubnt:blue:wlan",
-+ .gpio = 0,
-+ }, {
-+ .name = "ubnt:white:status",
-+ .gpio = 1,
-+ },
-+};
-+
-+static struct gpio_keys_button airgateway_gpio_keys[] __initdata = {
-+ {
-+ .desc = "reset",
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = 12,
-+ .active_low = 1,
-+ }
-+};
-+
-+static void __init ubnt_airgateway_setup(void)
-+{
-+ u32 t;
-+ u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
-+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+
-+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
-+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
-+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
-+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
-+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-+
-+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-+ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
-+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
-+
-+ ath79_register_m25p80(NULL);
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds),
-+ ubnt_airgateway_gpio_leds);
-+
-+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(airgateway_gpio_keys),
-+ airgateway_gpio_keys);
-+
-+ ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
-+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+
-+ ath79_register_mdio(0, 0x0);
-+
-+ ath79_register_eth(1);
-+ ath79_register_eth(0);
-+
-+ ath79_register_wmac(ee, NULL);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
-+ ubnt_airgateway_setup);
-+
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -143,6 +143,7 @@ enum ath79_mach_type {
- ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
- ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
- ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */
-+ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */
- ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
- ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
- ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -76,6 +76,7 @@ enum ath79_mach_type {
- ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
- ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */
- ATH79_MACH_OM2P, /* OpenMesh OM2P */
-+ ATH79_MACH_OM5P, /* OpenMesh OM5P */
- ATH79_MACH_PB42, /* Atheros PB42 */
- ATH79_MACH_PB92, /* Atheros PB92 */
- ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -587,6 +587,15 @@ config ATH79_MACH_OM2P
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-+config ATH79_MACH_OM5P
-+ bool "OpenMesh OM5P board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_MR600
- bool "OpenMesh MR600 board support"
- select SOC_AR934X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -81,6 +81,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += ma
- obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
- obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
- obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
-+obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o
- obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
- obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
- obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -31,6 +31,7 @@ enum ath79_mach_type {
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
- ATH79_MACH_AP83, /* Atheros AP83 */
- ATH79_MACH_AP96, /* Atheros AP96 */
-+ ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
- ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
- ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
- ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -654,7 +654,7 @@ config ATH79_MACH_EAP7660D
- select ATH79_DEV_M25P80
-
- config ATH79_MACH_ARCHER_C7
-- bool "TP-LINK Archer C7/TL-WDR4900 v2 board support"
-+ bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -103,6 +103,7 @@ enum ath79_mach_type {
- ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
- ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
- ATH79_MACH_RW2458N, /* Redwave RW2458N */
-+ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
- ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
- ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
- ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -518,6 +518,15 @@ config ATH79_MACH_RBSXTLITE
- select ATH79_DEV_WMAC
- select ATH79_ROUTERBOOT
-
-+config ATH79_MACH_SMART_300
-+ bool "NC-LINK SMART-300 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_WNDAP360
- bool "NETGEAR WNDAP360 board support"
- select SOC_AR71XX
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -92,6 +92,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-
- obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
- obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
- obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
-+obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
- obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
- obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
- obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
+++ /dev/null
---- a/arch/mips/ath79/mach-rb2011.c
-+++ b/arch/mips/ath79/mach-rb2011.c
-@@ -323,7 +323,7 @@ MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US
-
- static void __init rb2011r5_setup(void)
- {
-- rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB);
-+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB | RB2011_FLAG_WLAN);
- }
-
- MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup);
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -99,7 +99,7 @@ enum ath79_mach_type {
- ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
- ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
- ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */
-- ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS */
-+ ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */
- ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
- ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
- ATH79_MACH_RW2458N, /* Redwave RW2458N */
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1034,6 +1034,17 @@ config ATH79_MACH_BHU_BXU2000N2_A
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-+config ATH79_MACH_QIHOO_C301
-+ bool "Qihoo 360 C301 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+ select ATH79_DEV_USB
-+ select ATH79_NVRAM
-+
- endmenu
-
- config SOC_AR71XX
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -80,6 +80,7 @@ enum ath79_mach_type {
- ATH79_MACH_OM5P, /* OpenMesh OM5P */
- ATH79_MACH_PB42, /* Atheros PB42 */
- ATH79_MACH_PB92, /* Atheros PB92 */
-+ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
- ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
- ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
- ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -85,6 +85,7 @@ obj-$(CONFIG_ATH79_MACH_OM5P) += mach-o
- obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
- obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
- obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
-+obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o
- obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
- obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
- obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
+++ /dev/null
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -147,6 +147,8 @@ static void ar934x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = false;
- else
- ath79_wmac_data.is_clk_25mhz = true;
-+
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
- }
-
- static void qca953x_wmac_setup(void)
+++ /dev/null
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYP
-
- static void ath79_restart(char *command)
- {
-+ local_irq_disable();
- ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
- for (;;)
- if (cpu_wait)
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -263,6 +263,16 @@ config ATH79_MACH_WZR_HP_G450H
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-+config ATH79_MACH_WZR_450HP2
-+ bool "Buffalo WZR-450HP2 board support"
-+ select SOC_QCA955X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_WP543
- bool "Compex WP543/WPJ543 board support"
- select SOC_AR71XX
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -140,6 +140,7 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) +
- obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
- obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
- obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
-+obj-$(CONFIG_ATH79_MACH_WZR_450HP2) += mach-wzr-450hp2.o
- obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
- obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
- obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -183,6 +183,7 @@ enum ath79_mach_type {
- ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
- ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
- ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
-+ ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */
- ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
- ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
- };
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -39,6 +39,7 @@
- ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
-+ ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */
- ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
- ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
- ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -283,6 +283,17 @@
- select ATH79_DEV_USB
- select MYLOADER
-
-+config ATH79_MACH_DHP_1565_A1
-+ bool "D-Link DHP-1565 rev. A1 board support"
-+ select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_DIR_505_A1
- bool "D-Link DIR-505-A1 support"
- select SOC_AR933X
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -54,6 +54,7 @@
- obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
- obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
- obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
-+obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o
- obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
- obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
- obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
+++ /dev/null
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -654,6 +654,16 @@ config ATH79_MACH_CAP4200AG
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-+config ATH79_MACH_MR900
-+ bool "OpenMesh MR900 board support"
-+ select SOC_QCA955X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_WMAC
-+
- config ATH79_MACH_EAP7660D
- bool "Senao EAP7660D support"
- select SOC_AR71XX
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -74,6 +74,7 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach
- obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
- obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
- obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
-+obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o
- obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
- obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o
- obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -65,6 +65,7 @@ enum ath79_mach_type {
- ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
- ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
- ATH79_MACH_MR600, /* OpenMesh MR600 */
-+ ATH79_MACH_MR900, /* OpenMesh MR900 */
- ATH79_MACH_MYNET_N600, /* WD My Net N600 */
- ATH79_MACH_MYNET_N750, /* WD My Net N750 */
- ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */
+++ /dev/null
---- a/arch/mips/ath79/machtypes.h
-+++ b/arch/mips/ath79/machtypes.h
-@@ -66,6 +66,7 @@ enum ath79_mach_type {
- ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
- ATH79_MACH_MR600, /* OpenMesh MR600 */
- ATH79_MACH_MR900, /* OpenMesh MR900 */
-+ ATH79_MACH_MR900v2, /* OpenMesh MR900v2 */
- ATH79_MACH_MYNET_N600, /* WD My Net N600 */
- ATH79_MACH_MYNET_N750, /* WD My Net N750 */
- ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */
+++ /dev/null
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
-
-- /* check the turnaround bit: the PHY should be driving it to zero */
-- if (mdiobb_get_bit(ctrl) != 0) {
-- /* PHY didn't drive TA low -- flush any bits it
-- * may be trying to send.
-- */
-- for (i = 0; i < 32; i++)
-- mdiobb_get_bit(ctrl);
--
-- return 0xffff;
-- }
-+ mdiobb_get_bit(ctrl);
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
+++ /dev/null
---- a/arch/mips/include/asm/checksum.h
-+++ b/arch/mips/include/asm/checksum.h
-@@ -104,26 +104,30 @@ static inline __sum16 ip_fast_csum(const
- const unsigned int *stop = word + ihl;
- unsigned int csum;
- int carry;
-+ unsigned int w;
-
-- csum = word[0];
-- csum += word[1];
-- carry = (csum < word[1]);
-+ csum = net_hdr_word(word++);
-+
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[2];
-- carry = (csum < word[2]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[3];
-- carry = (csum < word[3]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- word += 4;
- do {
-- csum += *word;
-- carry = (csum < *word);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-- word++;
- } while (word != stop);
-
- return csum_fold(csum);
-@@ -192,69 +196,4 @@ static inline __sum16 ip_compute_csum(co
- return csum_fold(csum_partial(buff, len, 0));
- }
-
--#define _HAVE_ARCH_IPV6_CSUM
--static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-- const struct in6_addr *daddr,
-- __u32 len, unsigned short proto,
-- __wsum sum)
--{
-- __asm__(
-- " .set push # csum_ipv6_magic\n"
-- " .set noreorder \n"
-- " .set noat \n"
-- " addu %0, %5 # proto (long in network byte order)\n"
-- " sltu $1, %0, %5 \n"
-- " addu %0, $1 \n"
--
-- " addu %0, %6 # csum\n"
-- " sltu $1, %0, %6 \n"
-- " lw %1, 0(%2) # four words source address\n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 0(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " addu %0, $1 # Add final carry\n"
-- " .set pop"
-- : "=r" (sum), "=r" (proto)
-- : "r" (saddr), "r" (daddr),
-- "0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
--
-- return csum_fold(sum);
--}
--
- #endif /* _ASM_CHECKSUM_H */
---- a/include/uapi/linux/ip.h
-+++ b/include/uapi/linux/ip.h
-@@ -102,7 +102,7 @@ struct iphdr {
- __be32 saddr;
- __be32 daddr;
- /*The options start here. */
--};
-+} __attribute__((packed, aligned(2)));
-
-
- struct ip_auth_hdr {
---- a/include/uapi/linux/ipv6.h
-+++ b/include/uapi/linux/ipv6.h
-@@ -125,7 +125,7 @@ struct ipv6hdr {
-
- struct in6_addr saddr;
- struct in6_addr daddr;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /* index values for the variables in ipv6_devconf */
---- a/include/uapi/linux/tcp.h
-+++ b/include/uapi/linux/tcp.h
-@@ -54,7 +54,7 @@ struct tcphdr {
- __be16 window;
- __sum16 check;
- __be16 urg_ptr;
--};
-+} __attribute__((packed, aligned(2)));
-
- /*
- * The union cast uses a gcc extension to avoid aliasing problems
-@@ -64,7 +64,7 @@ struct tcphdr {
- union tcp_word_hdr {
- struct tcphdr hdr;
- __be32 words[5];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
-
---- a/include/uapi/linux/udp.h
-+++ b/include/uapi/linux/udp.h
-@@ -24,7 +24,7 @@ struct udphdr {
- __be16 dest;
- __be16 len;
- __sum16 check;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* UDP socket options */
- #define UDP_CORK 1 /* Never send partially complete segments */
---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-@@ -40,8 +40,8 @@ static bool ipv4_pkt_to_tuple(const stru
- if (ap == NULL)
- return false;
-
-- tuple->src.u3.ip = ap[0];
-- tuple->dst.u3.ip = ap[1];
-+ tuple->src.u3.ip = net_hdr_word(ap++);
-+ tuple->dst.u3.ip = net_hdr_word(ap);
-
- return true;
- }
---- a/include/uapi/linux/icmp.h
-+++ b/include/uapi/linux/icmp.h
-@@ -80,7 +80,7 @@ struct icmphdr {
- __be16 mtu;
- } frag;
- } un;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /*
---- a/include/uapi/linux/in6.h
-+++ b/include/uapi/linux/in6.h
-@@ -36,7 +36,7 @@ struct in6_addr {
- #define s6_addr in6_u.u6_addr8
- #define s6_addr16 in6_u.u6_addr16
- #define s6_addr32 in6_u.u6_addr32
--};
-+} __attribute__((packed, aligned(2)));
-
- struct sockaddr_in6 {
- unsigned short int sin6_family; /* AF_INET6 */
---- a/net/ipv6/af_inet6.c
-+++ b/net/ipv6/af_inet6.c
-@@ -60,6 +60,7 @@
- #endif
-
- #include <asm/uaccess.h>
-+#include <asm/unaligned.h>
- #include <linux/mroute6.h>
-
- MODULE_AUTHOR("Cast of dozens");
-@@ -687,7 +688,7 @@ bool ipv6_opt_accepted(const struct sock
- if ((opt->hop && (np->rxopt.bits.hopopts ||
- np->rxopt.bits.ohopopts)) ||
- ((IPV6_FLOWINFO_MASK &
-- *(__be32 *)skb_network_header(skb)) &&
-+ net_hdr_word(skb_network_header(skb))) &&
- np->rxopt.bits.rxflow) ||
- (opt->srcrt && (np->rxopt.bits.srcrt ||
- np->rxopt.bits.osrcrt)) ||
---- a/net/ipv6/tcp_ipv6.c
-+++ b/net/ipv6/tcp_ipv6.c
-@@ -64,6 +64,7 @@
- #include <net/secure_seq.h>
- #include <net/tcp_memcontrol.h>
-
-+#include <asm/unaligned.h>
- #include <asm/uaccess.h>
-
- #include <linux/proc_fs.h>
-@@ -763,10 +764,10 @@ static void tcp_v6_send_response(struct
- topt = (__be32 *)(t1 + 1);
-
- if (tsecr) {
-- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
-- *topt++ = htonl(tsval);
-- *topt++ = htonl(tsecr);
-+ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
-+ put_unaligned_be32(tsval, topt++);
-+ put_unaligned_be32(tsecr, topt++);
- }
-
- #ifdef CONFIG_TCP_MD5SIG
---- a/include/linux/ipv6.h
-+++ b/include/linux/ipv6.h
-@@ -4,6 +4,7 @@
- #include <uapi/linux/ipv6.h>
-
- #define ipv6_optlen(p) (((p)->hdrlen+1) << 3)
-+
- /*
- * This structure contains configuration options per IPv6 link.
- */
---- a/net/ipv6/datagram.c
-+++ b/net/ipv6/datagram.c
-@@ -365,7 +365,7 @@ int ipv6_recv_error(struct sock *sk, str
- ipv6_iface_scope_id(&sin->sin6_addr,
- IP6CB(skb)->iif);
- } else {
-- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
-+ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
- &sin->sin6_addr);
- sin->sin6_scope_id = 0;
- }
-@@ -691,12 +691,12 @@ int ip6_datagram_send_ctl(struct net *ne
- }
-
- if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
-- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
-+ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
- err = -EINVAL;
- goto exit_f;
- }
- }
-- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
-+ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
- break;
-
- case IPV6_2292HOPOPTS:
---- a/net/ipv6/ip6_gre.c
-+++ b/net/ipv6/ip6_gre.c
-@@ -391,7 +391,7 @@ static void ip6gre_err(struct sk_buff *s
-
- t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
- flags & GRE_KEY ?
-- *(((__be32 *)p) + (grehlen / 4) - 1) : 0,
-+ net_hdr_word(((__be32 *)p) + (grehlen / 4) - 1) : 0,
- p[1]);
- if (t == NULL)
- return;
-@@ -483,11 +483,11 @@ static int ip6gre_rcv(struct sk_buff *sk
- offset += 4;
- }
- if (flags&GRE_KEY) {
-- key = *(__be32 *)(h + offset);
-+ key = net_hdr_word(h + offset);
- offset += 4;
- }
- if (flags&GRE_SEQ) {
-- seqno = ntohl(*(__be32 *)(h + offset));
-+ seqno = ntohl(net_hdr_word(h + offset));
- offset += 4;
- }
- }
-@@ -747,7 +747,7 @@ static netdev_tx_t ip6gre_xmit2(struct s
-
- if (tunnel->parms.o_flags&GRE_SEQ) {
- ++tunnel->o_seqno;
-- *ptr = htonl(tunnel->o_seqno);
-+ net_hdr_word(ptr) = htonl(tunnel->o_seqno);
- ptr--;
- }
- if (tunnel->parms.o_flags&GRE_KEY) {
-@@ -841,9 +841,9 @@ static inline int ip6gre_xmit_ipv6(struc
-
- dsfield = ipv6_get_dsfield(ipv6h);
- if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
-- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK);
-+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK;
- if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL)
-- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_FLOWLABEL_MASK);
-+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_FLOWLABEL_MASK;
- if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
- fl6.flowi6_mark = skb->mark;
-
---- a/net/ipv6/ip6_tunnel.c
-+++ b/net/ipv6/ip6_tunnel.c
-@@ -1273,9 +1273,9 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
-
- dsfield = ipv6_get_dsfield(ipv6h);
- if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
-- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_TCLASS_MASK);
-+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_TCLASS_MASK;
- if (t->parms.flags & IP6_TNL_F_USE_ORIG_FLOWLABEL)
-- fl6.flowlabel |= (*(__be32 *) ipv6h & IPV6_FLOWLABEL_MASK);
-+ fl6.flowlabel |= net_hdr_word(ipv6h) & IPV6_FLOWLABEL_MASK;
- if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
- fl6.flowi6_mark = skb->mark;
-
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -573,7 +573,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
- goto drop;
- }
-
-- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
-+ pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
- if (pkt_len <= IPV6_MAXPLEN) {
- IP6_INC_STATS_BH(net, ipv6_skb_idev(skb),
- IPSTATS_MIB_INHDRERRORS);
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -212,5 +212,11 @@ struct callback_head {
- };
- #define rcu_head callback_head
-
-+struct net_hdr_word {
-+ u32 words[1];
-+} __attribute__((packed, aligned(2)));
-+
-+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
-+
- #endif /* __ASSEMBLY__ */
- #endif /* _LINUX_TYPES_H */
---- a/net/ipv4/af_inet.c
-+++ b/net/ipv4/af_inet.c
-@@ -1381,8 +1381,8 @@ static struct sk_buff **inet_gro_receive
- if (unlikely(ip_fast_csum((u8 *)iph, 5)))
- goto out_unlock;
-
-- id = ntohl(*(__be32 *)&iph->id);
-- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id ^ IP_DF));
-+ id = ntohl(net_hdr_word(&iph->id));
-+ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id ^ IP_DF));
- id >>= 16;
-
- for (p = *head; p; p = p->next) {
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -462,7 +462,7 @@ static struct neighbour *ipv4_neigh_look
- else if (skb)
- pkey = &ip_hdr(skb)->daddr;
-
-- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
-+ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
- if (n)
- return n;
- return neigh_create(&arp_tbl, pkey, dev);
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -412,48 +412,53 @@ static void tcp_options_write(__be32 *pt
- u16 options = opts->options; /* mungable copy */
-
- if (unlikely(OPTION_MD5 & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
- /* overload cookie hash location */
- opts->hash_location = (__u8 *)ptr;
- ptr += 4;
- }
-
- if (unlikely(opts->mss)) {
-- *ptr++ = htonl((TCPOPT_MSS << 24) |
-- (TCPOLEN_MSS << 16) |
-- opts->mss);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
-+ opts->mss);
- }
-
- if (likely(OPTION_TS & options)) {
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
-- (TCPOLEN_SACK_PERM << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_SACK_PERM << 24) |
-+ (TCPOLEN_SACK_PERM << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- options &= ~OPTION_SACK_ADVERTISE;
- } else {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- }
-- *ptr++ = htonl(opts->tsval);
-- *ptr++ = htonl(opts->tsecr);
-+ net_hdr_word(ptr++) = htonl(opts->tsval);
-+ net_hdr_word(ptr++) = htonl(opts->tsecr);
- }
-
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK_PERM << 8) |
-- TCPOLEN_SACK_PERM);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK_PERM << 8) |
-+ TCPOLEN_SACK_PERM);
- }
-
- if (unlikely(OPTION_WSCALE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_WINDOW << 16) |
-- (TCPOLEN_WINDOW << 8) |
-- opts->ws);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_WINDOW << 16) |
-+ (TCPOLEN_WINDOW << 8) |
-+ opts->ws);
- }
-
- if (unlikely(opts->num_sack_blocks)) {
-@@ -461,16 +466,17 @@ static void tcp_options_write(__be32 *pt
- tp->duplicate_sack : tp->selective_acks;
- int this_sack;
-
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK << 8) |
-- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK << 8) |
-+ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
- TCPOLEN_SACK_PERBLOCK)));
-
- for (this_sack = 0; this_sack < opts->num_sack_blocks;
- ++this_sack) {
-- *ptr++ = htonl(sp[this_sack].start_seq);
-- *ptr++ = htonl(sp[this_sack].end_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
- }
-
- tp->rx_opt.dsack = 0;
-@@ -479,9 +485,10 @@ static void tcp_options_write(__be32 *pt
- if (unlikely(OPTION_FAST_OPEN_COOKIE & options)) {
- struct tcp_fastopen_cookie *foc = opts->fastopen_cookie;
-
-- *ptr++ = htonl((TCPOPT_EXP << 24) |
-- ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) |
-- TCPOPT_FASTOPEN_MAGIC);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_EXP << 24) |
-+ ((TCPOLEN_EXP_FASTOPEN_BASE + foc->len) << 16) |
-+ TCPOPT_FASTOPEN_MAGIC);
-
- memcpy(ptr, foc->val, foc->len);
- if ((foc->len & 3) == 2) {
---- a/net/ipv4/igmp.c
-+++ b/net/ipv4/igmp.c
-@@ -470,7 +470,7 @@ static struct sk_buff *add_grec(struct s
- if (!skb)
- return NULL;
- psrc = (__be32 *)skb_put(skb, sizeof(__be32));
-- *psrc = psf->sf_inaddr;
-+ net_hdr_word(psrc) = psf->sf_inaddr;
- scount++; stotal++;
- if ((type == IGMPV3_ALLOW_NEW_SOURCES ||
- type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) {
---- a/include/uapi/linux/igmp.h
-+++ b/include/uapi/linux/igmp.h
-@@ -32,7 +32,7 @@ struct igmphdr {
- __u8 code; /* For newer IGMP */
- __sum16 csum;
- __be32 group;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* V3 group record types [grec_type] */
- #define IGMPV3_MODE_IS_INCLUDE 1
-@@ -48,7 +48,7 @@ struct igmpv3_grec {
- __be16 grec_nsrcs;
- __be32 grec_mca;
- __be32 grec_src[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_report {
- __u8 type;
-@@ -57,7 +57,7 @@ struct igmpv3_report {
- __be16 resv2;
- __be16 ngrec;
- struct igmpv3_grec grec[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_query {
- __u8 type;
-@@ -78,7 +78,7 @@ struct igmpv3_query {
- __u8 qqic;
- __be16 nsrcs;
- __be32 srcs[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
- #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
---- a/net/core/flow_dissector.c
-+++ b/net/core/flow_dissector.c
-@@ -157,7 +157,7 @@ ipv6:
- ports = skb_header_pointer(skb, nhoff + poff,
- sizeof(_ports), &_ports);
- if (ports)
-- flow->ports = *ports;
-+ flow->ports = net_hdr_word(ports);
- }
-
- flow->thoff = (u16) nhoff;
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -76,7 +76,7 @@ struct icmp6hdr {
- #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
- #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
- #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
--};
-+} __attribute__((packed, aligned(2)));
-
-
- #define ICMPV6_ROUTER_PREF_LOW 0x3
---- a/include/net/ndisc.h
-+++ b/include/net/ndisc.h
-@@ -76,7 +76,7 @@ struct ra_msg {
- struct icmp6hdr icmph;
- __be32 reachable_time;
- __be32 retrans_timer;
--};
-+} __attribute__((packed, aligned(2)));
-
- struct rd_msg {
- struct icmp6hdr icmph;
-@@ -148,10 +148,10 @@ static inline u32 ndisc_hashfn(const voi
- {
- const u32 *p32 = pkey;
-
-- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
-- (p32[1] * hash_rnd[1]) +
-- (p32[2] * hash_rnd[2]) +
-- (p32[3] * hash_rnd[3]));
-+ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
-+ (net_hdr_word(&p32[1]) * hash_rnd[1]) +
-+ (net_hdr_word(&p32[2]) * hash_rnd[2]) +
-+ (net_hdr_word(&p32[3]) * hash_rnd[3]));
- }
-
- static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
-@@ -168,8 +168,10 @@ static inline struct neighbour *__ipv6_n
- n = rcu_dereference_bh(n->next)) {
- u32 *n32 = (u32 *) n->primary_key;
- if (n->dev == dev &&
-- ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
-- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0)
-+ ((n32[0] ^ net_hdr_word(&p32[0])) |
-+ (n32[1] ^ net_hdr_word(&p32[1])) |
-+ (n32[2] ^ net_hdr_word(&p32[2])) |
-+ (n32[3] ^ net_hdr_word(&p32[3]))) == 0)
- return n;
- }
-
---- a/net/sched/cls_u32.c
-+++ b/net/sched/cls_u32.c
-@@ -142,7 +142,7 @@ next_knode:
- data = skb_header_pointer(skb, toff, 4, &hdata);
- if (!data)
- goto out;
-- if ((*data ^ key->val) & key->mask) {
-+ if ((net_hdr_word(data) ^ key->val) & key->mask) {
- n = n->next;
- goto next_knode;
- }
-@@ -193,8 +193,8 @@ check_terminal:
- &hdata);
- if (!data)
- goto out;
-- sel = ht->divisor & u32_hash_fold(*data, &n->sel,
-- n->fshift);
-+ sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
-+ &n->sel, n->fshift);
- }
- if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
- goto next_ht;
---- a/net/ipv6/ip6_offload.c
-+++ b/net/ipv6/ip6_offload.c
-@@ -199,7 +199,7 @@ static struct sk_buff **ipv6_gro_receive
- continue;
-
- iph2 = ipv6_hdr(p);
-- first_word = *(__be32 *)iph ^ *(__be32 *)iph2 ;
-+ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
-
- /* All fields must match except length and Traffic Class. */
- if (nlen != skb_network_header_len(p) ||
---- a/include/net/addrconf.h
-+++ b/include/net/addrconf.h
-@@ -43,7 +43,7 @@ struct prefix_info {
- __be32 reserved2;
-
- struct in6_addr prefix;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- #include <linux/netdevice.h>
---- a/include/net/inet_ecn.h
-+++ b/include/net/inet_ecn.h
-@@ -115,13 +115,13 @@ static inline int IP6_ECN_set_ce(struct
- {
- if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
- return 0;
-- *(__be32*)iph |= htonl(INET_ECN_CE << 20);
-+ net_hdr_word(iph) |= htonl(INET_ECN_CE << 20);
- return 1;
- }
-
- static inline void IP6_ECN_clear(struct ipv6hdr *iph)
- {
-- *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20);
-+ net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20);
- }
-
- static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner)
---- a/include/net/ipv6.h
-+++ b/include/net/ipv6.h
-@@ -107,7 +107,7 @@ struct frag_hdr {
- __u8 reserved;
- __be16 frag_off;
- __be32 identification;
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IP6_MF 0x0001
-
-@@ -386,8 +386,8 @@ static inline void __ipv6_addr_set_half(
- }
- #endif
- #endif
-- addr[0] = wh;
-- addr[1] = wl;
-+ net_hdr_word(&addr[0]) = wh;
-+ net_hdr_word(&addr[1]) = wl;
- }
-
- static inline void ipv6_addr_set(struct in6_addr *addr,
-@@ -446,6 +446,8 @@ static inline bool ipv6_prefix_equal(con
- const __be32 *a1 = addr1->s6_addr32;
- const __be32 *a2 = addr2->s6_addr32;
- unsigned int pdw, pbi;
-+ /* Used for last <32-bit fraction of prefix */
-+ u32 pbia1, pbia2;
-
- /* check complete u32 in prefix */
- pdw = prefixlen >> 5;
-@@ -454,7 +456,9 @@ static inline bool ipv6_prefix_equal(con
-
- /* check incomplete u32 in prefix */
- pbi = prefixlen & 0x1f;
-- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
-+ pbia1 = net_hdr_word(&a1[pdw]);
-+ pbia2 = net_hdr_word(&a2[pdw]);
-+ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
- return false;
-
- return true;
-@@ -592,13 +596,13 @@ static inline void ipv6_addr_set_v4mappe
- */
- static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
- {
-- const __be32 *a1 = token1, *a2 = token2;
-+ const struct in6_addr *a1 = token1, *a2 = token2;
- int i;
-
- addrlen >>= 2;
-
- for (i = 0; i < addrlen; i++) {
-- __be32 xb = a1[i] ^ a2[i];
-+ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
- if (xb)
- return i * 32 + 31 - __fls(ntohl(xb));
- }
-@@ -660,12 +664,13 @@ static inline int ipv6_addr_diff(const s
- static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
- __be32 flowlabel)
- {
-- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
-+ net_hdr_word((__be32 *)hdr) =
-+ htonl(0x60000000 | (tclass << 20)) | flowlabel;
- }
-
- static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
- }
-
- /*
---- a/include/net/secure_seq.h
-+++ b/include/net/secure_seq.h
-@@ -2,6 +2,7 @@
- #define _NET_SECURE_SEQ
-
- #include <linux/types.h>
-+#include <linux/in6.h>
-
- extern u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
- extern u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -55,7 +55,7 @@ enum {
- /* Internet address. */
- struct in_addr {
- __be32 s_addr;
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IP_TOS 1
- #define IP_TTL 2
---- a/net/core/secure_seq.c
-+++ b/net/core/secure_seq.c
-@@ -56,11 +56,12 @@ __u32 secure_tcpv6_sequence_number(const
- u32 secret[MD5_MESSAGE_BYTES / 4];
- u32 hash[MD5_DIGEST_WORDS];
- u32 i;
-+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
-
- net_secret_init();
- memcpy(hash, saddr, 16);
- for (i = 0; i < 4; i++)
-- secret[i] = net_secret[i] + (__force u32)daddr[i];
-+ secret[i] = net_secret[i] + (__force u32)daddr6->s6_addr32[i];
- secret[4] = net_secret[4] +
- (((__force u16)sport << 16) + (__force u16)dport);
- for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
-@@ -78,11 +79,12 @@ u32 secure_ipv6_port_ephemeral(const __b
- u32 secret[MD5_MESSAGE_BYTES / 4];
- u32 hash[MD5_DIGEST_WORDS];
- u32 i;
-+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
-
- net_secret_init();
- memcpy(hash, saddr, 16);
- for (i = 0; i < 4; i++)
-- secret[i] = net_secret[i] + (__force u32) daddr[i];
-+ secret[i] = net_secret[i] + (__force u32) daddr6->s6_addr32[i];
- secret[4] = net_secret[4] + (__force u32)dport;
- for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
- secret[i] = net_secret[i];
-@@ -160,11 +162,12 @@ u64 secure_dccpv6_sequence_number(__be32
- u32 hash[MD5_DIGEST_WORDS];
- u64 seq;
- u32 i;
-+ const struct in6_addr *daddr6 = (struct in6_addr *) daddr;
-
- net_secret_init();
- memcpy(hash, saddr, 16);
- for (i = 0; i < 4; i++)
-- secret[i] = net_secret[i] + daddr[i];
-+ secret[i] = net_secret[i] + daddr6->s6_addr32[i];
- secret[4] = net_secret[4] +
- (((__force u16)sport << 16) + (__force u16)dport);
- for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
---- a/net/ipv6/ip6_fib.c
-+++ b/net/ipv6/ip6_fib.c
-@@ -144,7 +144,7 @@ static __inline__ __be32 addr_bit_set(co
- * See include/asm-generic/bitops/le.h.
- */
- return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
-- addr[fn_bit >> 5];
-+ net_hdr_word(&addr[fn_bit >> 5]);
- }
-
- static __inline__ struct fib6_node * node_alloc(void)
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -454,7 +454,7 @@ static void tcp_sack(const struct sk_buf
-
- /* Fast path for timestamp-only option */
- if (length == TCPOLEN_TSTAMP_ALIGNED
-- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
-+ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
- | (TCPOPT_NOP << 16)
- | (TCPOPT_TIMESTAMP << 8)
- | TCPOLEN_TIMESTAMP))
---- a/net/netfilter/xt_LOG.c
-+++ b/net/netfilter/xt_LOG.c
-@@ -528,9 +528,9 @@ static void dump_ipv6_packet(struct sbuf
- /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
- sb_add(m, "LEN=%Zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
- ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
-- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
-+ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
- ih->hop_limit,
-- (ntohl(*(__be32 *)ih) & 0x000fffff));
-+ (ntohl(net_hdr_word(ih)) & 0x000fffff));
-
- fragment = 0;
- ptr = ip6hoff + sizeof(struct ipv6hdr);
---- a/net/xfrm/xfrm_input.c
-+++ b/net/xfrm/xfrm_input.c
-@@ -77,8 +77,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
- if (!pskb_may_pull(skb, hlen))
- return -EINVAL;
-
-- *spi = *(__be32*)(skb_transport_header(skb) + offset);
-- *seq = *(__be32*)(skb_transport_header(skb) + offset_seq);
-+ *spi = net_hdr_word(skb_transport_header(skb) + offset);
-+ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
- return 0;
- }
-
---- a/net/ipv4/ip_gre.c
-+++ b/net/ipv4/ip_gre.c
-@@ -190,13 +190,13 @@ static int parse_gre_header(struct sk_bu
- }
-
- if (greh->flags & GRE_KEY) {
-- tpi->key = *options;
-+ tpi->key = net_hdr_word(options);
- options++;
- } else
- tpi->key = 0;
-
- if (unlikely(greh->flags & GRE_SEQ)) {
-- tpi->seq = *options;
-+ tpi->seq = net_hdr_word(options);
- options++;
- } else
- tpi->seq = 0;
---- a/net/ipv4/tcp_input.c
-+++ b/net/ipv4/tcp_input.c
-@@ -3624,14 +3624,16 @@ static bool tcp_parse_aligned_timestamp(
- {
- const __be32 *ptr = (const __be32 *)(th + 1);
-
-- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
-- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
-+ if (net_hdr_word(ptr) ==
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
- tp->rx_opt.saw_tstamp = 1;
- ++ptr;
-- tp->rx_opt.rcv_tsval = ntohl(*ptr);
-+ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
- ++ptr;
-- if (*ptr)
-- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
-+ if (net_hdr_word(ptr))
-+ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
-+ tp->tsoffset;
- else
- tp->rx_opt.rcv_tsecr = 0;
- return true;
---- a/include/uapi/linux/if_pppox.h
-+++ b/include/uapi/linux/if_pppox.h
-@@ -47,6 +47,7 @@ struct pppoe_addr {
- */
- struct pptp_addr {
- __be16 call_id;
-+ __u16 pad;
- struct in_addr sin_addr;
- };
-
projects / openwrt / openwrt.git / commitdiff