mvebu: consolidate DTS files
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>
Thu, 18 Jun 2020 09:26:00 +0000 (11:26 +0200)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Tue, 23 Jun 2020 19:02:40 +0000 (21:02 +0200)
The DTS files in files-4.19 and files-5.4 are exactly identical
except for one file (armada-3720-uDPU.dts), which is only present
for 4.19, as it has been upstreamed before 5.4.

Since there is no point in maintaining all these identical files
twice, this patch moves them to the "files" directory, only keeping
the named exception to files-4.19.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
18 files changed:
target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts [deleted file]
target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-385-linksys-venom.dts [deleted file]
target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts [deleted file]
target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts [deleted file]
target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts [deleted file]
target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts [deleted file]
target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts [deleted file]
target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-385-linksys-venom.dts [deleted file]
target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts [deleted file]
target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts [deleted file]
target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts [deleted file]
target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts [deleted file]
target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts [new file with mode: 0644]
target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-venom.dts [new file with mode: 0644]
target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts [new file with mode: 0644]
target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts [new file with mode: 0644]
target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts [new file with mode: 0644]
target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts [new file with mode: 0644]

diff --git a/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts
deleted file mode 100644 (file)
index 6b8a964..0000000
+++ /dev/null
@@ -1,360 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Buffalo LinkStation LS421DE
- *
- * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include "mvebu-linkstation-fan.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Buffalo LinkStation LS421DE";
-       compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp";
-
-       aliases {
-               led-boot = &led_boot;
-               led-failsafe = &led_failsafe;
-               led-running = &led_power;
-               led-upgrade = &led_upgrade;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200 earlyprintk noinitrd rootfstype=squashfs";
-               stdout-path = "serial0:115200n8";
-               append-rootblock = "nullparameter="; /* override the bootloader args */
-       };
-
-       memory {
-               device_type = "memory";
-               reg = <0x00000000 0x20000000>; /* 512 MB */
-       };
-
-       soc {
-               ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-                         MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-                         MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-       };
-
-       gpio_fan {
-               gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
-                       &gpio0 14 GPIO_ACTIVE_HIGH>;
-               alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-       };
-
-       gpio_keys {
-               compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               pinctrl-0 = <&pmx_hdd_present &pmx_buttons>;
-               pinctrl-names = "default";
-
-               hdd1-present {
-                       label = "HDD1 Present";
-                       linux,code = <KEY_PROG1>;
-                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-               };
-
-               hdd2-present {
-                       label = "HDD2 Present";
-                       linux,code = <KEY_PROG2>;
-                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-
-               };
-
-               power {
-                       label = "Power Switch";
-                       linux,code = <KEY_POWER>;
-                       linux,input-type = <EV_SW>;
-                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-               };
-
-               function {
-                       label = "Function Button";
-                       linux,code = <KEY_OPTION>;
-                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       gpio_leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
-
-               system_red {
-                       label = "ls421de:red:system";
-                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_power: power_white {
-                       label = "ls421de:white:power";
-                       gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
-               };
-
-               led_failsafe: power_red {
-                       label = "ls421de:red:power";
-                       gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_upgrade: power_orange {
-                       label = "ls421de:orange:power";
-                       gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_boot: system_white {
-                       label = "ls421de:white:system";
-                       gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-               };
-
-               hdd1_red {
-                       label = "ls421de:red:hdd1";
-                       gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-                       linux,default-trigger = "disk-activity";
-               };
-
-               hdd2_red {
-                       label = "ls421de:red:hdd2";
-                       gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-                       linux,default-trigger = "disk-activity";
-               };
-       };
-
-       regulators {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>;
-
-               pinctrl-names = "default";
-
-               usb_v5_regulator: usb-v5-regulator {
-                       compatible = "regulator-fixed";
-                       regulator-name = "USB";
-                       regulator-min-microvolt = <5000000>;
-                       regulator-max-microvolt = <5000000>;
-                       enable-active-high;
-                       regulator-always-on;
-                       regulator-boot-on;
-                       gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-               };
-
-               ata1_regulator: ata1-regulator {
-                       compatible = "regulator-fixed";
-                       reg = <1>;
-                       regulator-name = "HDD1";
-                       regulator-min-microvolt = <12000000>;
-                       regulator-max-microvolt = <12000000>;
-                       startup-delay-us = <2000000>;
-                       enable-active-high;
-                       regulator-always-on;
-                       regulator-boot-on;
-                       gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               ata2_regulator: ata2-regulator {
-                       compatible = "regulator-fixed";
-                       reg = <2>;
-                       regulator-name = "HDD2";
-                       regulator-min-microvolt = <12000000>;
-                       regulator-max-microvolt = <12000000>;
-                       startup-delay-us = <4000000>;
-                       enable-active-high;
-                       regulator-always-on;
-                       regulator-boot-on;
-                       gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       /* FIXME: this driver needs to be aware of the LED2 eth phy use,
-          which must be set to off state before shutting down the machine */
-       restart_poweroff {
-               compatible = "restart-poweroff";
-       };
-};
-
-&eth1 {
-       pinctrl-0 = <&ge1_rgmii_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-       phy = <&phy0>;
-       phy-mode = "rgmii-id";
-};
-
-&i2c0 {
-       clock-frequency = <100000>;
-       status = "okay";
-
-       rs5c372a: rs5c372a@32 {
-               compatible = "ricoh,rs5c372a";
-               reg = <0x32>;
-       };
-};
-
-&mdio {
-       pinctrl-0 = <&mdio_pins>;
-       pinctrl-names = "default";
-
-       phy0: ethernet-phy@0 { /* Marvell 88E1518 */
-               reg = <0>;
-               /* LED2 is used to inform uBoot if the power-switch was slided
-                  to the "off" position, and then power off the machine.
-                  Page 0x3, Register 0x10, bit 8:
-                               0x800: LED2 off, power off the machine
-                               0x900: LED2 on, boot the machine */
-               marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED Function */
-                                       <0x3 0x11 0x1 0x4401>, /* LED polarity */
-                                       <0x3 0x12 0x1 0x4905>; /* LED Timer */
-       };
-};
-
-&pciec {
-       status = "okay";
-       /* Connected to uPD720202 USB 3.0 Host */
-       pcie@1,0 {
-               status = "okay";
-       };
-};
-
-&pmsu {
-       pinctrl-0 = <&pmx_power_cpu>;
-       pinctrl-names = "default";
-};
-
-&rtc {
-       status = "disabled";
-};
-
-&sata {
-       nr-ports = <2>;
-       status = "okay";
-};
-
-&sdio {
-       pinctrl-0 = <&sdio_pins2>;
-       pinctrl-names = "default";
-       status = "okay";
-       /* No CD or WP GPIOs */
-       broken-cd;
-};
-
-&uart0 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&nand_controller {
-       status = "okay";
-
-       nand@0 {
-               reg = <0>;
-               label = "pxa3xx_nand-0";
-               nand-rb = <0>;
-               marvell,nand-keep-config;
-               nand-on-flash-bbt;
-               nand-ecc-strength = <4>;
-               nand-ecc-step-size = <512>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "kernel";
-                               reg = <0x00000000 0x02000000>;  /* 32 MiB */
-                       };
-
-                       partition@2000000 {
-                               label = "ubi";
-                               reg = <0x02000000 0x1e000000>;  /* 480 MiB */
-                       };
-               };
-       };
-};
-
-&spi0 {
-       status = "okay";
-       pinctrl-0 = <&spi0_pins2>;
-       pinctrl-names = "default";
-
-       spi-flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "mxicy,mx25l8005", "jedec,spi-nor";
-               reg = <0>; /* Chip select 0 */
-               spi-max-frequency = <50000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x00000 0xf0000>; /* 960 KiB*/
-                               label = "u-boot";
-                               read-only;
-                       };
-                       partition@f0000 {
-                               reg = <0xf0000 0x10000>; /* 64 KiB */
-                               label = "u-boot-env";
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       pmx_power_cpu: pmx-power-cpu {
-               marvell,pins = "mpp4";
-               marvell,function = "vdd";
-       };
-       pmx_power_usb: pmx-power-usb {
-               marvell,pins = "mpp5";
-               marvell,function = "gpo";
-       };
-       pmx_power_hdd1: pmx-power-hdd1 {
-               marvell,pins = "mpp8";
-               marvell,function = "gpio";
-       };
-       pmx_power_hdd2: pmx-power-hdd2 {
-               marvell,pins = "mpp9";
-               marvell,function = "gpo";
-       };
-       pmx_fan_lock: pmx-fan-lock {
-               marvell,pins = "mpp10";
-               marvell,function = "gpio";
-       };
-       pmx_hdd_present: pmx-hdd-present {
-               marvell,pins = "mpp11", "mpp12";
-               marvell,function = "gpio";
-       };
-       pmx_fan_high: pmx-fan-high {
-               marvell,pins = "mpp13";
-               marvell,function = "gpio";
-       };
-       pmx_fan_low: pmx-fan-low {
-               marvell,pins = "mpp14";
-               marvell,function = "gpio";
-       };
-       pmx_buttons: pmx-buttons {
-               marvell,pins = "mpp15", "mpp16";
-               marvell,function = "gpio";
-       };
-       pmx_leds1: pmx-leds {
-               marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
-               marvell,function = "gpo";
-       };
-       pmx_leds2: pmx-leds {
-               marvell,pins = "mpp55", "mpp57", "mpp62";
-               marvell,function = "gpio";
-       };
-};
diff --git a/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-385-linksys-venom.dts b/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-385-linksys-venom.dts
deleted file mode 100644 (file)
index de81600..0000000
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT32X (Venom)
- *
- * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385-linksys.dtsi"
-
-/ {
-       model = "Linksys WRT32X";
-       compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385",
-                    "marvell,armada385", "marvell,armada380";
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-               append-rootblock = "root=/dev/mtdblock";
-       };
-};
-
-&expander0 {
-       wan_amber@0 {
-               label = "venom:amber:wan";
-               reg = <0x0>;
-       };
-
-       wan_blue@1 {
-               label = "venom:blue:wan";
-               reg = <0x1>;
-       };
-
-       usb2@5 {
-               label = "venom:blue:usb2";
-               reg = <0x5>;
-       };
-
-       usb3_1@6 {
-               label = "venom:blue:usb3_1";
-               reg = <0x6>;
-       };
-
-       usb3_2@7 {
-               label = "venom:blue:usb3_2";
-               reg = <0x7>;
-       };
-
-       wps_blue@8 {
-               label = "venom:blue:wps";
-               reg = <0x8>;
-       };
-
-       wps_amber@9 {
-               label = "venom:amber:wps";
-               reg = <0x9>;
-       };
-};
-
-&gpio_leds {
-       power {
-               gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-               label = "venom:blue:power";
-       };
-
-       sata {
-               gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-               label = "venom:blue:sata";
-       };
-
-       wlan_2g {
-               gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-               label = "venom:blue:wlan_2g";
-       };
-
-       wlan_5g {
-               gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-               label = "venom:blue:wlan_5g";
-       };
-};
-
-&gpio_leds_pins {
-       marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
-};
-
-&nand {
-       /* Spansion S34ML02G2 256MiB, OEM Layout */
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0000000 0x200000>;     /* 2MB */
-                       read-only;
-               };
-
-               partition@200000 {
-                       label = "u_env";
-                       reg = <0x200000 0x20000>;       /* 128KB */
-               };
-
-               partition@220000 {
-                       label = "s_env";
-                       reg = <0x220000 0x40000>;       /* 256KB */
-               };
-
-               partition@180000 {
-                       label = "unused_area";
-                       reg = <0x260000 0x5c0000>;      /* 5.75MB */
-               };
-
-               partition@7e0000 {
-                       label = "devinfo";
-                       reg = <0x7e0000 0x40000>;       /* 256KB */
-                       read-only;
-               };
-
-               /* kernel1 overlaps with rootfs1 by design */
-               partition@900000 {
-                       label = "kernel1";
-                       reg = <0x900000 0x7b00000>;     /* 123MB */
-               };
-
-               partition@c00000 {
-                       label = "rootfs1";
-                       reg = <0xc00000 0x7800000>;     /* 120MB */
-               };
-
-               /* kernel2 overlaps with rootfs2 by design */
-               partition@8400000 {
-                       label = "kernel2";
-                       reg = <0x8400000 0x7b00000>;    /* 123MB */
-               };
-
-               partition@8700000 {
-                       label = "rootfs2";
-                       reg = <0x8700000 0x7800000>;    /* 120MB */
-               };
-
-               /* last MB is for the BBT, not writable */
-               partition@ff00000 {
-                       label = "BBT";
-                       reg = <0xff00000 0x100000>;
-               };
-       };
-};
-
-
-&pcie1 {
-       mwlwifi {
-               marvell,chainmask = <4 4>;
-       };
-};
-
-&pcie2 {
-       mwlwifi {
-               marvell,chainmask = <4 4>;
-       };
-};
-
-&sdhci {
-       pinctrl-names = "default";
-       pinctrl-0 = <&sdhci_pins>;
-       no-1-8-v;
-       non-removable;
-       wp-inverted;
-       bus-width = <8>;
-       status = "okay";
-};
-
-&usb3_1_vbus {
-       gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_1_vbus_pins {
-       marvell,pins = "mpp44";
-};
diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
deleted file mode 100644 (file)
index ef90a1b..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
-       model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
-       compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
-                    "marvell,armada3720", "marvell,armada3710";
-};
-
-&sdhci0 {
-       status = "okay";
-
-       #address-cells = <1>;
-       #size-cells = <0>;
-       mmccard: mmccard@0 {
-               compatible = "mmc-card";
-               reg = <0>;
-       };
-};
diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
deleted file mode 100644 (file)
index 2b565ca..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
-       model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
-       compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
-                    "globalscale,espressobin", "marvell,armada3720",
-                    "marvell,armada3710";
-};
-
-&ports {
-       port@1 {
-               reg = <1>;
-               label = "lan1";
-               phy-handle = <&switch0phy0>;
-       };
-
-       port@3 {
-               reg = <3>;
-               label = "wan";
-               phy-handle = <&switch0phy2>;
-       };
-};
-
-&sdhci0 {
-       status = "okay";
-
-       #address-cells = <1>;
-       #size-cells = <0>;
-       mmccard: mmccard@0 {
-               compatible = "mmc-card";
-               reg = <0>;
-       };
-};
diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
deleted file mode 100644 (file)
index 8a408c3..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
-       model = "Globalscale Marvell ESPRESSOBin Board V7";
-       compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
-                    "marvell,armada3720", "marvell,armada3710";
-};
-
-&ports {
-       port@1 {
-               reg = <1>;
-               label = "lan1";
-               phy-handle = <&switch0phy0>;
-       };
-
-       port@3 {
-               reg = <3>;
-               label = "wan";
-               phy-handle = <&switch0phy2>;
-       };
-};
diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
deleted file mode 100644 (file)
index d1a966f..0000000
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
-       model = "GL.iNet GL-MV1000";
-       compatible = "glinet,gl-mv1000", "marvell,armada3720";
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
-       };
-
-       vcc_sd_reg1: regulator {
-               compatible = "regulator-gpio";
-               regulator-name = "vcc_sd1";
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <3300000>;
-               regulator-boot-on;
-        
-               gpios-states = <0>;
-               states = <1800000 0x1
-                       3300000 0x0>;
-               enable-active-high;
-       };
-};
-
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               reg = <0>;
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <104000000>;
-               m25p,fast-read;
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0 0xf0000>;
-                       };
-
-                       partition@f0000 {
-                               label = "u-boot-env";
-                               reg = <0Xf0000 0x8000>;
-                       };
-
-                       factory: partition@f8000 {
-                               label = "factory";
-                               reg = <0xf8000 0x8000>;
-                       };
-               };
-       };
-};
-
-&sdhci1 {
-       wp-inverted;
-       bus-width = <4>;
-       cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
-       marvell,pad-type = "sd";
-       no-1-8-v;
-       vqmmc-supply = <&vcc_sd_reg1>;
-       status = "okay";
-};
-
-&sdhci0 {
-       bus-width = <8>;
-       mmc-ddr-1_8v;
-       mmc-hs400-1_8v;
-       non-removable;
-       no-sd;
-       no-sdio;
-       marvell,pad-type = "fixed-1-8v";
-       status = "okay";
-};
-
-&usb3 {
-       status = "okay";
-};
-
-&usb2 {
-       status = "okay";
-};
-
-&uart0 {
-       status = "okay";
-};
-
-&mdio {
-       switch0: switch0@1 {
-               compatible = "marvell,mv88e6085";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <1>;
-
-               dsa,member = <0 0>;
-
-               ports: ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       port@0 {
-                               reg = <0>;
-                               label = "cpu";
-                               ethernet = <&eth0>;
-                       };
-
-                       port@1 {
-                               reg = <1>;
-                               label = "wan";
-                               phy-handle = <&switch0phy0>;
-                       };
-
-                       port@2 {
-                               reg = <2>;
-                               label = "lan0";
-                               phy-handle = <&switch0phy1>;
-                       };
-
-                       port@3 {
-                               reg = <3>;
-                               label = "lan1";
-                               phy-handle = <&switch0phy2>;
-                       };
-               };
-
-               mdio {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       switch0phy0: switch0phy0@11 {
-                               reg = <0x11>;
-                       };
-                       switch0phy1: switch0phy1@12 {
-                               reg = <0x12>;
-                       };
-                       switch0phy2: switch0phy2@13 {
-                               reg = <0x13>;
-                       };
-               };
-       };
-};
-
-&eth0 {
-       mtd-mac-address = <&factory 0x0>;
-       phy-mode = "rgmii-id";
-       status = "okay";
-
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
-       };
-};
diff --git a/target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts
deleted file mode 100644 (file)
index 6b8a964..0000000
+++ /dev/null
@@ -1,360 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Buffalo LinkStation LS421DE
- *
- * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
- */
-
-/dts-v1/;
-
-#include "armada-370.dtsi"
-#include "mvebu-linkstation-fan.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Buffalo LinkStation LS421DE";
-       compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp";
-
-       aliases {
-               led-boot = &led_boot;
-               led-failsafe = &led_failsafe;
-               led-running = &led_power;
-               led-upgrade = &led_upgrade;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200 earlyprintk noinitrd rootfstype=squashfs";
-               stdout-path = "serial0:115200n8";
-               append-rootblock = "nullparameter="; /* override the bootloader args */
-       };
-
-       memory {
-               device_type = "memory";
-               reg = <0x00000000 0x20000000>; /* 512 MB */
-       };
-
-       soc {
-               ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-                         MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-                         MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-       };
-
-       gpio_fan {
-               gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
-                       &gpio0 14 GPIO_ACTIVE_HIGH>;
-               alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-       };
-
-       gpio_keys {
-               compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               pinctrl-0 = <&pmx_hdd_present &pmx_buttons>;
-               pinctrl-names = "default";
-
-               hdd1-present {
-                       label = "HDD1 Present";
-                       linux,code = <KEY_PROG1>;
-                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-               };
-
-               hdd2-present {
-                       label = "HDD2 Present";
-                       linux,code = <KEY_PROG2>;
-                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-
-               };
-
-               power {
-                       label = "Power Switch";
-                       linux,code = <KEY_POWER>;
-                       linux,input-type = <EV_SW>;
-                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-               };
-
-               function {
-                       label = "Function Button";
-                       linux,code = <KEY_OPTION>;
-                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       gpio_leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
-
-               system_red {
-                       label = "ls421de:red:system";
-                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_power: power_white {
-                       label = "ls421de:white:power";
-                       gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
-               };
-
-               led_failsafe: power_red {
-                       label = "ls421de:red:power";
-                       gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_upgrade: power_orange {
-                       label = "ls421de:orange:power";
-                       gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_boot: system_white {
-                       label = "ls421de:white:system";
-                       gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-               };
-
-               hdd1_red {
-                       label = "ls421de:red:hdd1";
-                       gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-                       linux,default-trigger = "disk-activity";
-               };
-
-               hdd2_red {
-                       label = "ls421de:red:hdd2";
-                       gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
-                       linux,default-trigger = "disk-activity";
-               };
-       };
-
-       regulators {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>;
-
-               pinctrl-names = "default";
-
-               usb_v5_regulator: usb-v5-regulator {
-                       compatible = "regulator-fixed";
-                       regulator-name = "USB";
-                       regulator-min-microvolt = <5000000>;
-                       regulator-max-microvolt = <5000000>;
-                       enable-active-high;
-                       regulator-always-on;
-                       regulator-boot-on;
-                       gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-               };
-
-               ata1_regulator: ata1-regulator {
-                       compatible = "regulator-fixed";
-                       reg = <1>;
-                       regulator-name = "HDD1";
-                       regulator-min-microvolt = <12000000>;
-                       regulator-max-microvolt = <12000000>;
-                       startup-delay-us = <2000000>;
-                       enable-active-high;
-                       regulator-always-on;
-                       regulator-boot-on;
-                       gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               ata2_regulator: ata2-regulator {
-                       compatible = "regulator-fixed";
-                       reg = <2>;
-                       regulator-name = "HDD2";
-                       regulator-min-microvolt = <12000000>;
-                       regulator-max-microvolt = <12000000>;
-                       startup-delay-us = <4000000>;
-                       enable-active-high;
-                       regulator-always-on;
-                       regulator-boot-on;
-                       gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       /* FIXME: this driver needs to be aware of the LED2 eth phy use,
-          which must be set to off state before shutting down the machine */
-       restart_poweroff {
-               compatible = "restart-poweroff";
-       };
-};
-
-&eth1 {
-       pinctrl-0 = <&ge1_rgmii_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-       phy = <&phy0>;
-       phy-mode = "rgmii-id";
-};
-
-&i2c0 {
-       clock-frequency = <100000>;
-       status = "okay";
-
-       rs5c372a: rs5c372a@32 {
-               compatible = "ricoh,rs5c372a";
-               reg = <0x32>;
-       };
-};
-
-&mdio {
-       pinctrl-0 = <&mdio_pins>;
-       pinctrl-names = "default";
-
-       phy0: ethernet-phy@0 { /* Marvell 88E1518 */
-               reg = <0>;
-               /* LED2 is used to inform uBoot if the power-switch was slided
-                  to the "off" position, and then power off the machine.
-                  Page 0x3, Register 0x10, bit 8:
-                               0x800: LED2 off, power off the machine
-                               0x900: LED2 on, boot the machine */
-               marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED Function */
-                                       <0x3 0x11 0x1 0x4401>, /* LED polarity */
-                                       <0x3 0x12 0x1 0x4905>; /* LED Timer */
-       };
-};
-
-&pciec {
-       status = "okay";
-       /* Connected to uPD720202 USB 3.0 Host */
-       pcie@1,0 {
-               status = "okay";
-       };
-};
-
-&pmsu {
-       pinctrl-0 = <&pmx_power_cpu>;
-       pinctrl-names = "default";
-};
-
-&rtc {
-       status = "disabled";
-};
-
-&sata {
-       nr-ports = <2>;
-       status = "okay";
-};
-
-&sdio {
-       pinctrl-0 = <&sdio_pins2>;
-       pinctrl-names = "default";
-       status = "okay";
-       /* No CD or WP GPIOs */
-       broken-cd;
-};
-
-&uart0 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&nand_controller {
-       status = "okay";
-
-       nand@0 {
-               reg = <0>;
-               label = "pxa3xx_nand-0";
-               nand-rb = <0>;
-               marvell,nand-keep-config;
-               nand-on-flash-bbt;
-               nand-ecc-strength = <4>;
-               nand-ecc-step-size = <512>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "kernel";
-                               reg = <0x00000000 0x02000000>;  /* 32 MiB */
-                       };
-
-                       partition@2000000 {
-                               label = "ubi";
-                               reg = <0x02000000 0x1e000000>;  /* 480 MiB */
-                       };
-               };
-       };
-};
-
-&spi0 {
-       status = "okay";
-       pinctrl-0 = <&spi0_pins2>;
-       pinctrl-names = "default";
-
-       spi-flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "mxicy,mx25l8005", "jedec,spi-nor";
-               reg = <0>; /* Chip select 0 */
-               spi-max-frequency = <50000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x00000 0xf0000>; /* 960 KiB*/
-                               label = "u-boot";
-                               read-only;
-                       };
-                       partition@f0000 {
-                               reg = <0xf0000 0x10000>; /* 64 KiB */
-                               label = "u-boot-env";
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       pmx_power_cpu: pmx-power-cpu {
-               marvell,pins = "mpp4";
-               marvell,function = "vdd";
-       };
-       pmx_power_usb: pmx-power-usb {
-               marvell,pins = "mpp5";
-               marvell,function = "gpo";
-       };
-       pmx_power_hdd1: pmx-power-hdd1 {
-               marvell,pins = "mpp8";
-               marvell,function = "gpio";
-       };
-       pmx_power_hdd2: pmx-power-hdd2 {
-               marvell,pins = "mpp9";
-               marvell,function = "gpo";
-       };
-       pmx_fan_lock: pmx-fan-lock {
-               marvell,pins = "mpp10";
-               marvell,function = "gpio";
-       };
-       pmx_hdd_present: pmx-hdd-present {
-               marvell,pins = "mpp11", "mpp12";
-               marvell,function = "gpio";
-       };
-       pmx_fan_high: pmx-fan-high {
-               marvell,pins = "mpp13";
-               marvell,function = "gpio";
-       };
-       pmx_fan_low: pmx-fan-low {
-               marvell,pins = "mpp14";
-               marvell,function = "gpio";
-       };
-       pmx_buttons: pmx-buttons {
-               marvell,pins = "mpp15", "mpp16";
-               marvell,function = "gpio";
-       };
-       pmx_leds1: pmx-leds {
-               marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
-               marvell,function = "gpo";
-       };
-       pmx_leds2: pmx-leds {
-               marvell,pins = "mpp55", "mpp57", "mpp62";
-               marvell,function = "gpio";
-       };
-};
diff --git a/target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-385-linksys-venom.dts b/target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-385-linksys-venom.dts
deleted file mode 100644 (file)
index de81600..0000000
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT32X (Venom)
- *
- * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385-linksys.dtsi"
-
-/ {
-       model = "Linksys WRT32X";
-       compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385",
-                    "marvell,armada385", "marvell,armada380";
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
-               stdout-path = "serial0:115200n8";
-               append-rootblock = "root=/dev/mtdblock";
-       };
-};
-
-&expander0 {
-       wan_amber@0 {
-               label = "venom:amber:wan";
-               reg = <0x0>;
-       };
-
-       wan_blue@1 {
-               label = "venom:blue:wan";
-               reg = <0x1>;
-       };
-
-       usb2@5 {
-               label = "venom:blue:usb2";
-               reg = <0x5>;
-       };
-
-       usb3_1@6 {
-               label = "venom:blue:usb3_1";
-               reg = <0x6>;
-       };
-
-       usb3_2@7 {
-               label = "venom:blue:usb3_2";
-               reg = <0x7>;
-       };
-
-       wps_blue@8 {
-               label = "venom:blue:wps";
-               reg = <0x8>;
-       };
-
-       wps_amber@9 {
-               label = "venom:amber:wps";
-               reg = <0x9>;
-       };
-};
-
-&gpio_leds {
-       power {
-               gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-               label = "venom:blue:power";
-       };
-
-       sata {
-               gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-               label = "venom:blue:sata";
-       };
-
-       wlan_2g {
-               gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-               label = "venom:blue:wlan_2g";
-       };
-
-       wlan_5g {
-               gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-               label = "venom:blue:wlan_5g";
-       };
-};
-
-&gpio_leds_pins {
-       marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
-};
-
-&nand {
-       /* Spansion S34ML02G2 256MiB, OEM Layout */
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0000000 0x200000>;     /* 2MB */
-                       read-only;
-               };
-
-               partition@200000 {
-                       label = "u_env";
-                       reg = <0x200000 0x20000>;       /* 128KB */
-               };
-
-               partition@220000 {
-                       label = "s_env";
-                       reg = <0x220000 0x40000>;       /* 256KB */
-               };
-
-               partition@180000 {
-                       label = "unused_area";
-                       reg = <0x260000 0x5c0000>;      /* 5.75MB */
-               };
-
-               partition@7e0000 {
-                       label = "devinfo";
-                       reg = <0x7e0000 0x40000>;       /* 256KB */
-                       read-only;
-               };
-
-               /* kernel1 overlaps with rootfs1 by design */
-               partition@900000 {
-                       label = "kernel1";
-                       reg = <0x900000 0x7b00000>;     /* 123MB */
-               };
-
-               partition@c00000 {
-                       label = "rootfs1";
-                       reg = <0xc00000 0x7800000>;     /* 120MB */
-               };
-
-               /* kernel2 overlaps with rootfs2 by design */
-               partition@8400000 {
-                       label = "kernel2";
-                       reg = <0x8400000 0x7b00000>;    /* 123MB */
-               };
-
-               partition@8700000 {
-                       label = "rootfs2";
-                       reg = <0x8700000 0x7800000>;    /* 120MB */
-               };
-
-               /* last MB is for the BBT, not writable */
-               partition@ff00000 {
-                       label = "BBT";
-                       reg = <0xff00000 0x100000>;
-               };
-       };
-};
-
-
-&pcie1 {
-       mwlwifi {
-               marvell,chainmask = <4 4>;
-       };
-};
-
-&pcie2 {
-       mwlwifi {
-               marvell,chainmask = <4 4>;
-       };
-};
-
-&sdhci {
-       pinctrl-names = "default";
-       pinctrl-0 = <&sdhci_pins>;
-       no-1-8-v;
-       non-removable;
-       wp-inverted;
-       bus-width = <8>;
-       status = "okay";
-};
-
-&usb3_1_vbus {
-       gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_1_vbus_pins {
-       marvell,pins = "mpp44";
-};
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
deleted file mode 100644 (file)
index ef90a1b..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
-       model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
-       compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
-                    "marvell,armada3720", "marvell,armada3710";
-};
-
-&sdhci0 {
-       status = "okay";
-
-       #address-cells = <1>;
-       #size-cells = <0>;
-       mmccard: mmccard@0 {
-               compatible = "mmc-card";
-               reg = <0>;
-       };
-};
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
deleted file mode 100644 (file)
index 2b565ca..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
-       model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
-       compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
-                    "globalscale,espressobin", "marvell,armada3720",
-                    "marvell,armada3710";
-};
-
-&ports {
-       port@1 {
-               reg = <1>;
-               label = "lan1";
-               phy-handle = <&switch0phy0>;
-       };
-
-       port@3 {
-               reg = <3>;
-               label = "wan";
-               phy-handle = <&switch0phy2>;
-       };
-};
-
-&sdhci0 {
-       status = "okay";
-
-       #address-cells = <1>;
-       #size-cells = <0>;
-       mmccard: mmccard@0 {
-               compatible = "mmc-card";
-               reg = <0>;
-       };
-};
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
deleted file mode 100644 (file)
index 8a408c3..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
-       model = "Globalscale Marvell ESPRESSOBin Board V7";
-       compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
-                    "marvell,armada3720", "marvell,armada3710";
-};
-
-&ports {
-       port@1 {
-               reg = <1>;
-               label = "lan1";
-               phy-handle = <&switch0phy0>;
-       };
-
-       port@3 {
-               reg = <3>;
-               label = "wan";
-               phy-handle = <&switch0phy2>;
-       };
-};
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
deleted file mode 100644 (file)
index d1a966f..0000000
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
-       model = "GL.iNet GL-MV1000";
-       compatible = "glinet,gl-mv1000", "marvell,armada3720";
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
-       };
-
-       vcc_sd_reg1: regulator {
-               compatible = "regulator-gpio";
-               regulator-name = "vcc_sd1";
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <3300000>;
-               regulator-boot-on;
-        
-               gpios-states = <0>;
-               states = <1800000 0x1
-                       3300000 0x0>;
-               enable-active-high;
-       };
-};
-
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               reg = <0>;
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <104000000>;
-               m25p,fast-read;
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0 0xf0000>;
-                       };
-
-                       partition@f0000 {
-                               label = "u-boot-env";
-                               reg = <0Xf0000 0x8000>;
-                       };
-
-                       factory: partition@f8000 {
-                               label = "factory";
-                               reg = <0xf8000 0x8000>;
-                       };
-               };
-       };
-};
-
-&sdhci1 {
-       wp-inverted;
-       bus-width = <4>;
-       cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
-       marvell,pad-type = "sd";
-       no-1-8-v;
-       vqmmc-supply = <&vcc_sd_reg1>;
-       status = "okay";
-};
-
-&sdhci0 {
-       bus-width = <8>;
-       mmc-ddr-1_8v;
-       mmc-hs400-1_8v;
-       non-removable;
-       no-sd;
-       no-sdio;
-       marvell,pad-type = "fixed-1-8v";
-       status = "okay";
-};
-
-&usb3 {
-       status = "okay";
-};
-
-&usb2 {
-       status = "okay";
-};
-
-&uart0 {
-       status = "okay";
-};
-
-&mdio {
-       switch0: switch0@1 {
-               compatible = "marvell,mv88e6085";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <1>;
-
-               dsa,member = <0 0>;
-
-               ports: ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       port@0 {
-                               reg = <0>;
-                               label = "cpu";
-                               ethernet = <&eth0>;
-                       };
-
-                       port@1 {
-                               reg = <1>;
-                               label = "wan";
-                               phy-handle = <&switch0phy0>;
-                       };
-
-                       port@2 {
-                               reg = <2>;
-                               label = "lan0";
-                               phy-handle = <&switch0phy1>;
-                       };
-
-                       port@3 {
-                               reg = <3>;
-                               label = "lan1";
-                               phy-handle = <&switch0phy2>;
-                       };
-               };
-
-               mdio {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       switch0phy0: switch0phy0@11 {
-                               reg = <0x11>;
-                       };
-                       switch0phy1: switch0phy1@12 {
-                               reg = <0x12>;
-                       };
-                       switch0phy2: switch0phy2@13 {
-                               reg = <0x13>;
-                       };
-               };
-       };
-};
-
-&eth0 {
-       mtd-mac-address = <&factory 0x0>;
-       phy-mode = "rgmii-id";
-       status = "okay";
-
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
-       };
-};
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts
new file mode 100644 (file)
index 0000000..6b8a964
--- /dev/null
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo LinkStation LS421DE
+ *
+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Buffalo LinkStation LS421DE";
+       compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp";
+
+       aliases {
+               led-boot = &led_boot;
+               led-failsafe = &led_failsafe;
+               led-running = &led_power;
+               led-upgrade = &led_upgrade;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200 earlyprintk noinitrd rootfstype=squashfs";
+               stdout-path = "serial0:115200n8";
+               append-rootblock = "nullparameter="; /* override the bootloader args */
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>; /* 512 MB */
+       };
+
+       soc {
+               ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+                         MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+                         MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+       };
+
+       gpio_fan {
+               gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
+                       &gpio0 14 GPIO_ACTIVE_HIGH>;
+               alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+       };
+
+       gpio_keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-0 = <&pmx_hdd_present &pmx_buttons>;
+               pinctrl-names = "default";
+
+               hdd1-present {
+                       label = "HDD1 Present";
+                       linux,code = <KEY_PROG1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+               };
+
+               hdd2-present {
+                       label = "HDD2 Present";
+                       linux,code = <KEY_PROG2>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+
+               };
+
+               power {
+                       label = "Power Switch";
+                       linux,code = <KEY_POWER>;
+                       linux,input-type = <EV_SW>;
+                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+               };
+
+               function {
+                       label = "Function Button";
+                       linux,code = <KEY_OPTION>;
+                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio_leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+
+               system_red {
+                       label = "ls421de:red:system";
+                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_power: power_white {
+                       label = "ls421de:white:power";
+                       gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+
+               led_failsafe: power_red {
+                       label = "ls421de:red:power";
+                       gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_upgrade: power_orange {
+                       label = "ls421de:orange:power";
+                       gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_boot: system_white {
+                       label = "ls421de:white:system";
+                       gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+               };
+
+               hdd1_red {
+                       label = "ls421de:red:hdd1";
+                       gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+                       linux,default-trigger = "disk-activity";
+               };
+
+               hdd2_red {
+                       label = "ls421de:red:hdd2";
+                       gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+                       linux,default-trigger = "disk-activity";
+               };
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>;
+
+               pinctrl-names = "default";
+
+               usb_v5_regulator: usb-v5-regulator {
+                       compatible = "regulator-fixed";
+                       regulator-name = "USB";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+               };
+
+               ata1_regulator: ata1-regulator {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "HDD1";
+                       regulator-min-microvolt = <12000000>;
+                       regulator-max-microvolt = <12000000>;
+                       startup-delay-us = <2000000>;
+                       enable-active-high;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+               };
+
+               ata2_regulator: ata2-regulator {
+                       compatible = "regulator-fixed";
+                       reg = <2>;
+                       regulator-name = "HDD2";
+                       regulator-min-microvolt = <12000000>;
+                       regulator-max-microvolt = <12000000>;
+                       startup-delay-us = <4000000>;
+                       enable-active-high;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       /* FIXME: this driver needs to be aware of the LED2 eth phy use,
+          which must be set to off state before shutting down the machine */
+       restart_poweroff {
+               compatible = "restart-poweroff";
+       };
+};
+
+&eth1 {
+       pinctrl-0 = <&ge1_rgmii_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+       phy = <&phy0>;
+       phy-mode = "rgmii-id";
+};
+
+&i2c0 {
+       clock-frequency = <100000>;
+       status = "okay";
+
+       rs5c372a: rs5c372a@32 {
+               compatible = "ricoh,rs5c372a";
+               reg = <0x32>;
+       };
+};
+
+&mdio {
+       pinctrl-0 = <&mdio_pins>;
+       pinctrl-names = "default";
+
+       phy0: ethernet-phy@0 { /* Marvell 88E1518 */
+               reg = <0>;
+               /* LED2 is used to inform uBoot if the power-switch was slided
+                  to the "off" position, and then power off the machine.
+                  Page 0x3, Register 0x10, bit 8:
+                               0x800: LED2 off, power off the machine
+                               0x900: LED2 on, boot the machine */
+               marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED Function */
+                                       <0x3 0x11 0x1 0x4401>, /* LED polarity */
+                                       <0x3 0x12 0x1 0x4905>; /* LED Timer */
+       };
+};
+
+&pciec {
+       status = "okay";
+       /* Connected to uPD720202 USB 3.0 Host */
+       pcie@1,0 {
+               status = "okay";
+       };
+};
+
+&pmsu {
+       pinctrl-0 = <&pmx_power_cpu>;
+       pinctrl-names = "default";
+};
+
+&rtc {
+       status = "disabled";
+};
+
+&sata {
+       nr-ports = <2>;
+       status = "okay";
+};
+
+&sdio {
+       pinctrl-0 = <&sdio_pins2>;
+       pinctrl-names = "default";
+       status = "okay";
+       /* No CD or WP GPIOs */
+       broken-cd;
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&nand_controller {
+       status = "okay";
+
+       nand@0 {
+               reg = <0>;
+               label = "pxa3xx_nand-0";
+               nand-rb = <0>;
+               marvell,nand-keep-config;
+               nand-on-flash-bbt;
+               nand-ecc-strength = <4>;
+               nand-ecc-step-size = <512>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "kernel";
+                               reg = <0x00000000 0x02000000>;  /* 32 MiB */
+                       };
+
+                       partition@2000000 {
+                               label = "ubi";
+                               reg = <0x02000000 0x1e000000>;  /* 480 MiB */
+                       };
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+       pinctrl-0 = <&spi0_pins2>;
+       pinctrl-names = "default";
+
+       spi-flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+               reg = <0>; /* Chip select 0 */
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x00000 0xf0000>; /* 960 KiB*/
+                               label = "u-boot";
+                               read-only;
+                       };
+                       partition@f0000 {
+                               reg = <0xf0000 0x10000>; /* 64 KiB */
+                               label = "u-boot-env";
+                       };
+               };
+       };
+};
+
+&pinctrl {
+       pmx_power_cpu: pmx-power-cpu {
+               marvell,pins = "mpp4";
+               marvell,function = "vdd";
+       };
+       pmx_power_usb: pmx-power-usb {
+               marvell,pins = "mpp5";
+               marvell,function = "gpo";
+       };
+       pmx_power_hdd1: pmx-power-hdd1 {
+               marvell,pins = "mpp8";
+               marvell,function = "gpio";
+       };
+       pmx_power_hdd2: pmx-power-hdd2 {
+               marvell,pins = "mpp9";
+               marvell,function = "gpo";
+       };
+       pmx_fan_lock: pmx-fan-lock {
+               marvell,pins = "mpp10";
+               marvell,function = "gpio";
+       };
+       pmx_hdd_present: pmx-hdd-present {
+               marvell,pins = "mpp11", "mpp12";
+               marvell,function = "gpio";
+       };
+       pmx_fan_high: pmx-fan-high {
+               marvell,pins = "mpp13";
+               marvell,function = "gpio";
+       };
+       pmx_fan_low: pmx-fan-low {
+               marvell,pins = "mpp14";
+               marvell,function = "gpio";
+       };
+       pmx_buttons: pmx-buttons {
+               marvell,pins = "mpp15", "mpp16";
+               marvell,function = "gpio";
+       };
+       pmx_leds1: pmx-leds {
+               marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
+               marvell,function = "gpo";
+       };
+       pmx_leds2: pmx-leds {
+               marvell,pins = "mpp55", "mpp57", "mpp62";
+               marvell,function = "gpio";
+       };
+};
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-venom.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-venom.dts
new file mode 100644 (file)
index 0000000..de81600
--- /dev/null
@@ -0,0 +1,213 @@
+/*
+ * Device Tree file for the Linksys WRT32X (Venom)
+ *
+ * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+       model = "Linksys WRT32X";
+       compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385",
+                    "marvell,armada385", "marvell,armada380";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+               append-rootblock = "root=/dev/mtdblock";
+       };
+};
+
+&expander0 {
+       wan_amber@0 {
+               label = "venom:amber:wan";
+               reg = <0x0>;
+       };
+
+       wan_blue@1 {
+               label = "venom:blue:wan";
+               reg = <0x1>;
+       };
+
+       usb2@5 {
+               label = "venom:blue:usb2";
+               reg = <0x5>;
+       };
+
+       usb3_1@6 {
+               label = "venom:blue:usb3_1";
+               reg = <0x6>;
+       };
+
+       usb3_2@7 {
+               label = "venom:blue:usb3_2";
+               reg = <0x7>;
+       };
+
+       wps_blue@8 {
+               label = "venom:blue:wps";
+               reg = <0x8>;
+       };
+
+       wps_amber@9 {
+               label = "venom:amber:wps";
+               reg = <0x9>;
+       };
+};
+
+&gpio_leds {
+       power {
+               gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+               label = "venom:blue:power";
+       };
+
+       sata {
+               gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+               label = "venom:blue:sata";
+       };
+
+       wlan_2g {
+               gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+               label = "venom:blue:wlan_2g";
+       };
+
+       wlan_5g {
+               gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+               label = "venom:blue:wlan_5g";
+       };
+};
+
+&gpio_leds_pins {
+       marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+};
+
+&nand {
+       /* Spansion S34ML02G2 256MiB, OEM Layout */
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0000000 0x200000>;     /* 2MB */
+                       read-only;
+               };
+
+               partition@200000 {
+                       label = "u_env";
+                       reg = <0x200000 0x20000>;       /* 128KB */
+               };
+
+               partition@220000 {
+                       label = "s_env";
+                       reg = <0x220000 0x40000>;       /* 256KB */
+               };
+
+               partition@180000 {
+                       label = "unused_area";
+                       reg = <0x260000 0x5c0000>;      /* 5.75MB */
+               };
+
+               partition@7e0000 {
+                       label = "devinfo";
+                       reg = <0x7e0000 0x40000>;       /* 256KB */
+                       read-only;
+               };
+
+               /* kernel1 overlaps with rootfs1 by design */
+               partition@900000 {
+                       label = "kernel1";
+                       reg = <0x900000 0x7b00000>;     /* 123MB */
+               };
+
+               partition@c00000 {
+                       label = "rootfs1";
+                       reg = <0xc00000 0x7800000>;     /* 120MB */
+               };
+
+               /* kernel2 overlaps with rootfs2 by design */
+               partition@8400000 {
+                       label = "kernel2";
+                       reg = <0x8400000 0x7b00000>;    /* 123MB */
+               };
+
+               partition@8700000 {
+                       label = "rootfs2";
+                       reg = <0x8700000 0x7800000>;    /* 120MB */
+               };
+
+               /* last MB is for the BBT, not writable */
+               partition@ff00000 {
+                       label = "BBT";
+                       reg = <0xff00000 0x100000>;
+               };
+       };
+};
+
+
+&pcie1 {
+       mwlwifi {
+               marvell,chainmask = <4 4>;
+       };
+};
+
+&pcie2 {
+       mwlwifi {
+               marvell,chainmask = <4 4>;
+       };
+};
+
+&sdhci {
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdhci_pins>;
+       no-1-8-v;
+       non-removable;
+       wp-inverted;
+       bus-width = <8>;
+       status = "okay";
+};
+
+&usb3_1_vbus {
+       gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_1_vbus_pins {
+       marvell,pins = "mpp44";
+};
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
new file mode 100644 (file)
index 0000000..ef90a1b
--- /dev/null
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+
+#include "armada-3720-espressobin.dts"
+
+/ {
+       model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
+       compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
+                    "marvell,armada3720", "marvell,armada3710";
+};
+
+&sdhci0 {
+       status = "okay";
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+       mmccard: mmccard@0 {
+               compatible = "mmc-card";
+               reg = <0>;
+       };
+};
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
new file mode 100644 (file)
index 0000000..2b565ca
--- /dev/null
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+
+#include "armada-3720-espressobin.dts"
+
+/ {
+       model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
+       compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
+                    "globalscale,espressobin", "marvell,armada3720",
+                    "marvell,armada3710";
+};
+
+&ports {
+       port@1 {
+               reg = <1>;
+               label = "lan1";
+               phy-handle = <&switch0phy0>;
+       };
+
+       port@3 {
+               reg = <3>;
+               label = "wan";
+               phy-handle = <&switch0phy2>;
+       };
+};
+
+&sdhci0 {
+       status = "okay";
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+       mmccard: mmccard@0 {
+               compatible = "mmc-card";
+               reg = <0>;
+       };
+};
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
new file mode 100644 (file)
index 0000000..8a408c3
--- /dev/null
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+
+#include "armada-3720-espressobin.dts"
+
+/ {
+       model = "Globalscale Marvell ESPRESSOBin Board V7";
+       compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
+                    "marvell,armada3720", "marvell,armada3710";
+};
+
+&ports {
+       port@1 {
+               reg = <1>;
+               label = "lan1";
+               phy-handle = <&switch0phy0>;
+       };
+
+       port@3 {
+               reg = <3>;
+               label = "wan";
+               phy-handle = <&switch0phy2>;
+       };
+};
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
new file mode 100644 (file)
index 0000000..d1a966f
--- /dev/null
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+       model = "GL.iNet GL-MV1000";
+       compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+       };
+
+       vcc_sd_reg1: regulator {
+               compatible = "regulator-gpio";
+               regulator-name = "vcc_sd1";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+        
+               gpios-states = <0>;
+               states = <1800000 0x1
+                       3300000 0x0>;
+               enable-active-high;
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               reg = <0>;
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <104000000>;
+               m25p,fast-read;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0 0xf0000>;
+                       };
+
+                       partition@f0000 {
+                               label = "u-boot-env";
+                               reg = <0Xf0000 0x8000>;
+                       };
+
+                       factory: partition@f8000 {
+                               label = "factory";
+                               reg = <0xf8000 0x8000>;
+                       };
+               };
+       };
+};
+
+&sdhci1 {
+       wp-inverted;
+       bus-width = <4>;
+       cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+       marvell,pad-type = "sd";
+       no-1-8-v;
+       vqmmc-supply = <&vcc_sd_reg1>;
+       status = "okay";
+};
+
+&sdhci0 {
+       bus-width = <8>;
+       mmc-ddr-1_8v;
+       mmc-hs400-1_8v;
+       non-removable;
+       no-sd;
+       no-sdio;
+       marvell,pad-type = "fixed-1-8v";
+       status = "okay";
+};
+
+&usb3 {
+       status = "okay";
+};
+
+&usb2 {
+       status = "okay";
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&mdio {
+       switch0: switch0@1 {
+               compatible = "marvell,mv88e6085";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <1>;
+
+               dsa,member = <0 0>;
+
+               ports: ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               label = "cpu";
+                               ethernet = <&eth0>;
+                       };
+
+                       port@1 {
+                               reg = <1>;
+                               label = "wan";
+                               phy-handle = <&switch0phy0>;
+                       };
+
+                       port@2 {
+                               reg = <2>;
+                               label = "lan0";
+                               phy-handle = <&switch0phy1>;
+                       };
+
+                       port@3 {
+                               reg = <3>;
+                               label = "lan1";
+                               phy-handle = <&switch0phy2>;
+                       };
+               };
+
+               mdio {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       switch0phy0: switch0phy0@11 {
+                               reg = <0x11>;
+                       };
+                       switch0phy1: switch0phy1@12 {
+                               reg = <0x12>;
+                       };
+                       switch0phy2: switch0phy2@13 {
+                               reg = <0x13>;
+                       };
+               };
+       };
+};
+
+&eth0 {
+       mtd-mac-address = <&factory 0x0>;
+       phy-mode = "rgmii-id";
+       status = "okay";
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+};