ar71xx: add support for gl-mifi
authorZhao Gang <gang.zhao.42@gmail.com>
Tue, 19 Jul 2016 02:54:11 +0000 (02:54 +0000)
committerJohn Crispin <john@phrozen.org>
Sun, 24 Jul 2016 04:38:30 +0000 (06:38 +0200)
This add initial support for gl-mifi.
Product page: http://www.gl-inet.com/mifi/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/image/generic.mk

index 1254c71..a77147e 100755 (executable)
@@ -275,6 +275,13 @@ gl-inet)
        ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
        ;;
 
+gl-mifi)
+       ucidef_set_led_netdev "wan" "WAN" "gl_mifi:wan" "eth0"
+       ucidef_set_led_netdev "lan" "LAN" "gl_mifi:lan" "eth1"
+       ucidef_set_led_netdev "3gnet" "3GNET" "gl_mifi:net" "3g-wan"
+       ucidef_set_led_wlan "wlan" "WLAN" "gl_mifi:wlan" "phy0tpt"
+       ;;
+
 esr900)
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "engenius:blue:wlan-2g" "phy0tpt"
        ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "engenius:blue:wlan-5g" "phy1tpt"
index 7c4958a..11e78a6 100755 (executable)
@@ -394,6 +394,7 @@ gl-ar150 |\
 gl-ar300m |\
 gl-domino |\
 gl-inet |\
+gl-mifi |\
 jwap003 |\
 pb42 |\
 pb44 |\
index d1c92c9..68ad3c2 100755 (executable)
@@ -538,6 +538,8 @@ ar71xx_board_detect() {
                ;;
        *"GL-AR300M")
                name="gl-ar300m"
+       *"GL-MIFI")
+               name="gl-mifi"
                ;;
        *"EnGenius EPG5000")
                name="epg5000"
index c5cb4ab..c02e5e7 100755 (executable)
@@ -232,6 +232,7 @@ platform_check_image() {
        ew-dorin | \
        ew-dorin-router | \
        gl-ar150 | \
+       gl-mifi | \
        gl-ar300 | \
        gl-ar300m | \
        gl-domino | \
index 1cae660..5878b7a 100644 (file)
@@ -92,6 +92,7 @@ CONFIG_ATH79_MACH_GL_AR300=y
 CONFIG_ATH79_MACH_GL_AR300M=y
 CONFIG_ATH79_MACH_GL_DOMINO=y
 CONFIG_ATH79_MACH_GL_INET=y
+CONFIG_ATH79_MACH_GL_MIFI=y
 CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
 CONFIG_ATH79_MACH_GS_OOLITE=y
 CONFIG_ATH79_MACH_HIWIFI_HC6361=y
index a5c673c..a0ceecb 100644 (file)
@@ -624,6 +624,16 @@ config ATH79_MACH_GL_DOMINO
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_GL_MIFI
+       bool "GL MIFI support"
+       select SOC_AR933X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_GL_INET
        bool "GL-INET support"
        select SOC_AR933X
index a49384a..ff4fe9f 100644 (file)
@@ -96,6 +96,7 @@ obj-$(CONFIG_ATH79_MACH_GL_AR300)     += mach-gl-ar300.o
 obj-$(CONFIG_ATH79_MACH_GL_AR300M)     += mach-gl-ar300m.o
 obj-$(CONFIG_ATH79_MACH_GL_DOMINO)             += mach-gl-domino.o
 obj-$(CONFIG_ATH79_MACH_GL_INET)       += mach-gl-inet.o
+obj-$(CONFIG_ATH79_MACH_GL_MIFI)       += mach-gl-mifi.o
 obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o
 obj-$(CONFIG_ATH79_MACH_GS_OOLITE)     += mach-gs-oolite.o
 obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
new file mode 100644 (file)
index 0000000..567fef9
--- /dev/null
@@ -0,0 +1,114 @@
+/*
+ *  Mifi board support
+ *
+ *  Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2013 alzhao <alzhao@gmail.com>
+ *  Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define GL_MIFI_GPIO_LED_WAN           27
+#define GL_MIFI_GPIO_LED_LAN           16
+#define GL_MIFI_GPIO_LED_WLAN          1
+#define GL_MIFI_GPIO_LED_NET           0
+#define GL_MIFI_GPIO_LED_3GCONTROL     7
+
+#define GL_MIFI_GPIO_BTN_RESET    11
+
+#define GL_MIFI_KEYS_POLL_INTERVAL     20      /* msecs */
+#define GL_MIFI_KEYS_DEBOUNCE_INTERVAL (3 * GL_MIFI_KEYS_POLL_INTERVAL)
+
+#define GL_MIFI_MAC0_OFFSET        0x0000
+#define GL_MIFI_MAC1_OFFSET        0x0000
+#define GL_MIFI_CALDATA_OFFSET 0x1000
+#define GL_MIFI_WMAC_MAC_OFFSET        0x0000
+
+static struct gpio_led gl_mifi_leds_gpio[] __initdata = {
+       {
+               .name = "gl_mifi:wan",
+               .gpio = GL_MIFI_GPIO_LED_WAN,
+               .active_low = 0,
+       },
+       {
+               .name = "gl_mifi:lan",
+               .gpio = GL_MIFI_GPIO_LED_LAN,
+               .active_low = 0,
+       },
+       {
+               .name = "gl_mifi:wlan",
+               .gpio = GL_MIFI_GPIO_LED_WLAN,
+               .active_low = 0,
+       },
+       {
+               .name = "gl_mifi:net",
+               .gpio = GL_MIFI_GPIO_LED_NET,
+               .active_low = 0,
+       },
+       {
+               .name = "gl_mifi:3gcontrol",
+               .gpio = GL_MIFI_GPIO_LED_3GCONTROL,
+               .active_low = 0,
+       }
+};
+
+static struct gpio_keys_button gl_mifi_gpio_keys[] __initdata = {
+       {
+               .desc = "reset",
+               .type = EV_KEY,
+               .code = KEY_RESTART,
+               .debounce_interval = GL_MIFI_KEYS_DEBOUNCE_INTERVAL,
+               .gpio = GL_MIFI_GPIO_BTN_RESET,
+               .active_low = 0,
+       },
+};
+
+static void __init gl_mifi_setup(void)
+{
+
+       /* ART base address */
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+       ath79_setup_ar933x_phy4_switch(false, false);
+
+       /* register flash. */
+       ath79_register_m25p80(NULL);
+
+       /* register gpio LEDs and keys */
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_mifi_leds_gpio),
+                                gl_mifi_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, GL_MIFI_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(gl_mifi_gpio_keys),
+                                       gl_mifi_gpio_keys);
+
+       /* enable usb */
+       ath79_register_usb();
+
+       /* register eth0 as WAN, eth1 as LAN */
+       ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_MIFI_MAC0_OFFSET, 0);
+       ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_MIFI_MAC1_OFFSET, 0);
+       ath79_register_mdio(0, 0x0);
+       ath79_register_eth(0);
+       ath79_register_eth(1);
+
+       /* register wireless mac with cal data */
+       ath79_register_wmac(art + GL_MIFI_CALDATA_OFFSET, art + GL_MIFI_WMAC_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_GL_MIFI, "GL-MIFI", "GL-MIFI",gl_mifi_setup);
index 3e52ee4..3051a25 100644 (file)
@@ -89,6 +89,7 @@ enum ath79_mach_type {
        ATH79_MACH_GL_AR300M,           /* GL-AR300M */
        ATH79_MACH_GL_DOMINO,           /* Domino */
        ATH79_MACH_GL_INET,             /* GL-CONNECT GL-INET */
+       ATH79_MACH_GL_MIFI,             /* GL-MIFI support */
        ATH79_MACH_GS_MINIBOX_V1,       /* Gainstrong MiniBox V1.0 */
        ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */
        ATH79_MACH_HIWIFI_HC6361,       /* HiWiFi HC6361 */
index cb57dba..6e5ef2b 100644 (file)
@@ -77,6 +77,16 @@ define Device/gl-domino
 endef
 TARGET_DEVICES += gl-domino
 
+define Device/gl-mifi
+  DEVICE_TITLE := GL MIFI
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+  BOARDNAME = GL-MIFI
+  IMAGE_SIZE = 16000k
+  CONSOLE = ttyATH0,115200
+  MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += gl-mifi
+
 define Device/dr531
   DEVICE_TITLE := Wallys DR531
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2