ath79: add LED trigger for TL-WR902AC v1 WAN LED

Inspired by commit c48b571ad708, add an LED trigger for the WAN LED on top of
the TP-Link TL-WR902AC v1. Currently, only the LED on the port itself shows the
link state, while the LED on top of the device stays dark.

The WAN port of the device is a hybrid LAN/WAN one, hence why the LED at the
port was labeled LAN.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 55d677252534eaee068612e102593c7abc45e7eb..946d7306c3be2aa562c57c34e393dc7790026e7c 100755 (executable)
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -219,6 +219,7 @@ tplink,cpe510-v3)
 tplink,cpe610-v1|\
 tplink,tl-wr902ac-v1)
        ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
+       ucidef_set_led_netdev "internet" "Internet" "tp-link:green:internet" "eth0"
        ;;
 tplink,re355-v1|\
 tplink,re450-v1|\