--- /dev/null
+From ded8f22945899f4e87dd6d952bbc4abce6e64b7e Mon Sep 17 00:00:00 2001
+From: William Zhang <william.zhang@broadcom.com>
+Date: Wed, 3 Aug 2022 10:54:50 -0700
+Subject: [PATCH] arm64: dts: Move BCM4908 dts to bcmbca folder
+
+As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts
+files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the
+BCM4908 board dts. Delete bcm4908 folder and its makefile as well.
+
+Signed-off-by: William Zhang <william.zhang@broadcom.com>
+Link: https://lore.kernel.org/r/20220803175455.47638-5-william.zhang@broadcom.com
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/Makefile | 1 -
+ arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 5 -----
+ arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 4 ++++
+ .../broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts | 0
+ .../{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts | 0
+ .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi | 0
+ .../broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts | 0
+ .../broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts | 0
+ .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi | 0
+ 9 files changed, 4 insertions(+), 6 deletions(-)
+ delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
+ rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (100%)
+ rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (100%)
+ rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
+ rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (100%)
+ rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (100%)
+ rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)
+
+--- a/arch/arm64/boot/dts/broadcom/Makefile
++++ b/arch/arm64/boot/dts/broadcom/Makefile
+@@ -4,7 +4,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp
+ bcm2837-rpi-3-b-plus.dtb \
+ bcm2837-rpi-cm3-io3.dtb
+
+-subdir-y += bcm4908
+ subdir-y += bcmbca
+ subdir-y += northstar2
+ subdir-y += stingray
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
++++ /dev/null
+@@ -1,5 +0,0 @@
+-# SPDX-License-Identifier: GPL-2.0
+-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
+-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
+-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
+-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb
+--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+@@ -1,5 +1,9 @@
+ # SPDX-License-Identifier: GPL-2.0
+ dtb-$(CONFIG_ARCH_BCMBCA) += \
++ bcm4906-netgear-r8000p.dtb \
++ bcm4906-tplink-archer-c2300-v1.dtb \
++ bcm4908-asus-gt-ac5300.dtb \
++ bcm4908-netgear-raxe500.dtb \
+ bcm4912-asus-gt-ax6000.dtb \
+ bcm94912.dtb \
+ bcm963158.dtb \
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
++++ /dev/null
+@@ -1,157 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+-
+-#include <dt-bindings/gpio/gpio.h>
+-#include <dt-bindings/input/input.h>
+-#include <dt-bindings/leds/common.h>
+-
+-#include "bcm4906.dtsi"
+-
+-/ {
+- compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
+- model = "Netgear R8000P";
+-
+- memory@0 {
+- device_type = "memory";
+- reg = <0x00 0x00 0x00 0x20000000>;
+- };
+-
+- leds {
+- compatible = "gpio-leds";
+-
+- led-power-white {
+- function = LED_FUNCTION_POWER;
+- color = <LED_COLOR_ID_WHITE>;
+- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-power-amber {
+- function = LED_FUNCTION_POWER;
+- color = <LED_COLOR_ID_AMBER>;
+- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-wps {
+- function = LED_FUNCTION_WPS;
+- color = <LED_COLOR_ID_WHITE>;
+- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-2ghz {
+- function = "2ghz";
+- color = <LED_COLOR_ID_WHITE>;
+- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-5ghz-1 {
+- function = "5ghz-1";
+- color = <LED_COLOR_ID_WHITE>;
+- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-5ghz-2 {
+- function = "5ghz-2";
+- color = <LED_COLOR_ID_WHITE>;
+- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-usb2 {
+- function = "usb2";
+- color = <LED_COLOR_ID_WHITE>;
+- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-usb3 {
+- function = "usb3";
+- color = <LED_COLOR_ID_WHITE>;
+- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-wifi {
+- function = "wifi";
+- color = <LED_COLOR_ID_WHITE>;
+- gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
+- };
+- };
+-};
+-
+-&enet {
+- nvmem-cells = <&base_mac_addr>;
+- nvmem-cell-names = "mac-address";
+-};
+-
+-&usb_phy {
+- brcm,ioc = <1>;
+- status = "okay";
+-};
+-
+-&ehci {
+- status = "okay";
+-};
+-
+-&ohci {
+- status = "okay";
+-};
+-
+-&xhci {
+- status = "okay";
+-};
+-
+-&ports {
+- port@0 {
+- label = "lan4";
+- };
+-
+- port@1 {
+- label = "lan3";
+- };
+-
+- port@2 {
+- label = "lan2";
+- };
+-
+- port@3 {
+- label = "lan1";
+- };
+-
+- port@7 {
+- reg = <7>;
+- phy-mode = "internal";
+- phy-handle = <&phy12>;
+- label = "wan";
+- };
+-};
+-
+-&nandcs {
+- nand-ecc-strength = <4>;
+- nand-ecc-step-size = <512>;
+- nand-on-flash-bbt;
+-
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- partitions {
+- compatible = "fixed-partitions";
+- #address-cells = <1>;
+- #size-cells = <1>;
+-
+- partition@0 {
+- compatible = "nvmem-cells";
+- label = "cferom";
+- reg = <0x0 0x100000>;
+-
+- #address-cells = <1>;
+- #size-cells = <1>;
+- ranges = <0 0x0 0x100000>;
+-
+- base_mac_addr: mac@106a0 {
+- reg = <0x106a0 0x6>;
+- };
+- };
+-
+- partition@100000 {
+- compatible = "brcm,bcm4908-firmware";
+- label = "firmware";
+- reg = <0x100000 0x4400000>;
+- };
+- };
+-};
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
++++ /dev/null
+@@ -1,182 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+-
+-#include <dt-bindings/gpio/gpio.h>
+-#include <dt-bindings/input/input.h>
+-#include <dt-bindings/leds/common.h>
+-
+-#include "bcm4906.dtsi"
+-
+-/ {
+- compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
+- model = "TP-Link Archer C2300 V1";
+-
+- memory@0 {
+- device_type = "memory";
+- reg = <0x00 0x00 0x00 0x20000000>;
+- };
+-
+- leds {
+- compatible = "gpio-leds";
+-
+- led-power {
+- function = LED_FUNCTION_POWER;
+- color = <LED_COLOR_ID_BLUE>;
+- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-2ghz {
+- function = "2ghz";
+- color = <LED_COLOR_ID_BLUE>;
+- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-5ghz {
+- function = "5ghz";
+- color = <LED_COLOR_ID_BLUE>;
+- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-wan-amber {
+- function = LED_FUNCTION_WAN;
+- color = <LED_COLOR_ID_AMBER>;
+- gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+- };
+-
+- led-wan-blue {
+- function = LED_FUNCTION_WAN;
+- color = <LED_COLOR_ID_BLUE>;
+- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-lan {
+- function = LED_FUNCTION_LAN;
+- color = <LED_COLOR_ID_BLUE>;
+- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-wps {
+- function = LED_FUNCTION_WPS;
+- color = <LED_COLOR_ID_BLUE>;
+- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-usb2 {
+- function = "usb2";
+- color = <LED_COLOR_ID_BLUE>;
+- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-usb3 {
+- function = "usbd3";
+- color = <LED_COLOR_ID_BLUE>;
+- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+- };
+-
+- led-brightness {
+- function = LED_FUNCTION_BACKLIGHT;
+- color = <LED_COLOR_ID_WHITE>;
+- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+- };
+- };
+-
+- gpio-keys-polled {
+- compatible = "gpio-keys-polled";
+- poll-interval = <100>;
+-
+- key-brightness {
+- label = "LEDs";
+- linux,code = <KEY_BRIGHTNESS_ZERO>;
+- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+- };
+-
+- key-wps {
+- label = "WPS";
+- linux,code = <KEY_WPS_BUTTON>;
+- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+- };
+-
+- key-wifi {
+- label = "WiFi";
+- linux,code = <KEY_RFKILL>;
+- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+- };
+-
+- key-restart {
+- label = "Reset";
+- linux,code = <KEY_RESTART>;
+- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+- };
+- };
+-};
+-
+-&usb_phy {
+- brcm,ioc = <1>;
+- status = "okay";
+-};
+-
+-&ehci {
+- status = "okay";
+-};
+-
+-&ohci {
+- status = "okay";
+-};
+-
+-&xhci {
+- status = "okay";
+-};
+-
+-&ports {
+- port@0 {
+- label = "lan4";
+- };
+-
+- port@1 {
+- label = "lan3";
+- };
+-
+- port@2 {
+- label = "lan2";
+- };
+-
+- port@3 {
+- label = "lan1";
+- };
+-
+- port@7 {
+- reg = <7>;
+- phy-mode = "internal";
+- phy-handle = <&phy12>;
+- label = "wan";
+- };
+-};
+-
+-&nandcs {
+- nand-ecc-strength = <4>;
+- nand-ecc-step-size = <512>;
+- nand-on-flash-bbt;
+-
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- partitions {
+- compatible = "brcm,bcm4908-partitions";
+- #address-cells = <1>;
+- #size-cells = <1>;
+-
+- partition@0 {
+- label = "cferom";
+- reg = <0x0 0x100000>;
+- };
+-
+- partition@100000 {
+- compatible = "brcm,bcm4908-firmware";
+- reg = <0x100000 0x3900000>;
+- };
+-
+- partition@5800000 {
+- compatible = "brcm,bcm4908-firmware";
+- reg = <0x3a00000 0x3900000>;
+- };
+- };
+-};
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
++++ /dev/null
+@@ -1,26 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+-
+-#include "bcm4908.dtsi"
+-
+-/ {
+- cpus {
+- /delete-node/ cpu@2;
+-
+- /delete-node/ cpu@3;
+- };
+-
+- timer {
+- compatible = "arm,armv8-timer";
+- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+- };
+-
+- pmu {
+- compatible = "arm,cortex-a53-pmu";
+- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+- interrupt-affinity = <&cpu0>, <&cpu1>;
+- };
+-};
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
++++ /dev/null
+@@ -1,207 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+-
+-#include <dt-bindings/gpio/gpio.h>
+-#include <dt-bindings/input/input.h>
+-#include <dt-bindings/leds/common.h>
+-
+-#include "bcm4908.dtsi"
+-
+-/ {
+- compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
+- model = "Asus GT-AC5300";
+-
+- memory@0 {
+- device_type = "memory";
+- reg = <0x00 0x00 0x00 0x40000000>;
+- };
+-
+- gpio-keys-polled {
+- compatible = "gpio-keys-polled";
+- poll-interval = <100>;
+-
+- key-wifi {
+- label = "WiFi";
+- linux,code = <KEY_RFKILL>;
+- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+- };
+-
+- key-wps {
+- label = "WPS";
+- linux,code = <KEY_WPS_BUTTON>;
+- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+- };
+-
+- key-restart {
+- label = "Reset";
+- linux,code = <KEY_RESTART>;
+- gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+- };
+-
+- key-brightness {
+- label = "LEDs";
+- linux,code = <KEY_BRIGHTNESS_ZERO>;
+- gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+- };
+- };
+-};
+-
+-&enet {
+- nvmem-cells = <&base_mac_addr>;
+- nvmem-cell-names = "mac-address";
+-};
+-
+-&usb_phy {
+- brcm,ioc = <1>;
+- status = "okay";
+-};
+-
+-&ehci {
+- status = "okay";
+-};
+-
+-&ohci {
+- status = "okay";
+-};
+-
+-&xhci {
+- status = "okay";
+-};
+-
+-&ports {
+- port@0 {
+- label = "lan2";
+- };
+-
+- port@1 {
+- label = "lan1";
+- };
+-
+- port@2 {
+- label = "lan6";
+- };
+-
+- port@3 {
+- label = "lan5";
+- };
+-
+- /* External BCM53134S switch */
+- port@7 {
+- label = "sw";
+- reg = <7>;
+- phy-mode = "rgmii";
+-
+- fixed-link {
+- speed = <1000>;
+- full-duplex;
+- };
+- };
+-};
+-
+-&mdio {
+- /* lan8 */
+- ethernet-phy@0 {
+- reg = <0>;
+- };
+-
+- /* lan7 */
+- ethernet-phy@1 {
+- reg = <1>;
+- };
+-
+- /* lan4 */
+- ethernet-phy@2 {
+- reg = <2>;
+- };
+-
+- /* lan3 */
+- ethernet-phy@3 {
+- reg = <3>;
+- };
+-};
+-
+-&leds {
+- led-power@11 {
+- reg = <0x11>;
+- function = LED_FUNCTION_POWER;
+- color = <LED_COLOR_ID_WHITE>;
+- default-state = "on";
+- active-low;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pins_led_17_a>;
+- };
+-
+- led-wan-red@12 {
+- reg = <0x12>;
+- function = LED_FUNCTION_WAN;
+- color = <LED_COLOR_ID_RED>;
+- active-low;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pins_led_18_a>;
+- };
+-
+- led-wps@14 {
+- reg = <0x14>;
+- function = LED_FUNCTION_WPS;
+- color = <LED_COLOR_ID_WHITE>;
+- active-low;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pins_led_20_a>;
+- };
+-
+- led-wan-white@15 {
+- reg = <0x15>;
+- function = LED_FUNCTION_WAN;
+- color = <LED_COLOR_ID_WHITE>;
+- active-low;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pins_led_21_a>;
+- };
+-
+- led-lan@19 {
+- reg = <0x19>;
+- function = LED_FUNCTION_LAN;
+- color = <LED_COLOR_ID_WHITE>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pins_led_25_a>;
+- };
+-};
+-
+-&nandcs {
+- nand-ecc-strength = <4>;
+- nand-ecc-step-size = <512>;
+- nand-on-flash-bbt;
+- brcm,nand-has-wp;
+-
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- partitions {
+- compatible = "brcm,bcm4908-partitions";
+- #address-cells = <1>;
+- #size-cells = <1>;
+-
+- partition@0 {
+- compatible = "nvmem-cells";
+- label = "cferom";
+- reg = <0x0 0x100000>;
+-
+- #address-cells = <1>;
+- #size-cells = <1>;
+- ranges = <0 0x0 0x100000>;
+-
+- base_mac_addr: mac@106a0 {
+- reg = <0x106a0 0x6>;
+- };
+- };
+-
+- partition@100000 {
+- compatible = "brcm,bcm4908-firmware";
+- reg = <0x100000 0x5700000>;
+- };
+-
+- partition@5800000 {
+- compatible = "brcm,bcm4908-firmware";
+- reg = <0x5800000 0x5700000>;
+- };
+- };
+-};
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
++++ /dev/null
+@@ -1,50 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+-
+-#include "bcm4908.dtsi"
+-
+-/ {
+- compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
+- model = "Netgear RAXE500";
+-
+- memory@0 {
+- device_type = "memory";
+- reg = <0x00 0x00 0x00 0x40000000>;
+- };
+-};
+-
+-&ehci {
+- status = "okay";
+-};
+-
+-&ohci {
+- status = "okay";
+-};
+-
+-&xhci {
+- status = "okay";
+-};
+-
+-&ports {
+- port@0 {
+- label = "lan4";
+- };
+-
+- port@1 {
+- label = "lan3";
+- };
+-
+- port@2 {
+- label = "lan2";
+- };
+-
+- port@3 {
+- label = "lan1";
+- };
+-
+- port@7 {
+- reg = <7>;
+- phy-mode = "internal";
+- phy-handle = <&phy12>;
+- label = "wan";
+- };
+-};
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
++++ /dev/null
+@@ -1,575 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+-
+-#include <dt-bindings/interrupt-controller/irq.h>
+-#include <dt-bindings/interrupt-controller/arm-gic.h>
+-#include <dt-bindings/phy/phy.h>
+-#include <dt-bindings/soc/bcm-pmb.h>
+-
+-/dts-v1/;
+-
+-/ {
+- interrupt-parent = <&gic>;
+-
+- #address-cells = <2>;
+- #size-cells = <2>;
+-
+- aliases {
+- serial0 = &uart0;
+- };
+-
+- chosen {
+- stdout-path = "serial0:115200n8";
+- };
+-
+- cpus {
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- cpu0: cpu@0 {
+- device_type = "cpu";
+- compatible = "brcm,brahma-b53";
+- reg = <0x0>;
+- enable-method = "spin-table";
+- cpu-release-addr = <0x0 0xfff8>;
+- next-level-cache = <&l2>;
+- };
+-
+- cpu1: cpu@1 {
+- device_type = "cpu";
+- compatible = "brcm,brahma-b53";
+- reg = <0x1>;
+- enable-method = "spin-table";
+- cpu-release-addr = <0x0 0xfff8>;
+- next-level-cache = <&l2>;
+- };
+-
+- cpu2: cpu@2 {
+- device_type = "cpu";
+- compatible = "brcm,brahma-b53";
+- reg = <0x2>;
+- enable-method = "spin-table";
+- cpu-release-addr = <0x0 0xfff8>;
+- next-level-cache = <&l2>;
+- };
+-
+- cpu3: cpu@3 {
+- device_type = "cpu";
+- compatible = "brcm,brahma-b53";
+- reg = <0x3>;
+- enable-method = "spin-table";
+- cpu-release-addr = <0x0 0xfff8>;
+- next-level-cache = <&l2>;
+- };
+-
+- l2: l2-cache0 {
+- compatible = "cache";
+- };
+- };
+-
+- axi@81000000 {
+- compatible = "simple-bus";
+- #address-cells = <1>;
+- #size-cells = <1>;
+- ranges = <0x00 0x00 0x81000000 0x4000>;
+-
+- gic: interrupt-controller@1000 {
+- compatible = "arm,gic-400";
+- #interrupt-cells = <3>;
+- #address-cells = <0>;
+- interrupt-controller;
+- reg = <0x1000 0x1000>,
+- <0x2000 0x2000>;
+- };
+- };
+-
+- timer {
+- compatible = "arm,armv8-timer";
+- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+- };
+-
+- pmu {
+- compatible = "arm,cortex-a53-pmu";
+- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+- };
+-
+- clocks {
+- periph_clk: periph_clk {
+- compatible = "fixed-clock";
+- #clock-cells = <0>;
+- clock-frequency = <50000000>;
+- clock-output-names = "periph";
+- };
+- };
+-
+- soc {
+- compatible = "simple-bus";
+- #address-cells = <1>;
+- #size-cells = <1>;
+- ranges = <0x00 0x00 0x80000000 0x281000>;
+-
+- enet: ethernet@2000 {
+- compatible = "brcm,bcm4908-enet";
+- reg = <0x2000 0x1000>;
+-
+- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+- interrupt-names = "rx", "tx";
+- };
+-
+- usb_phy: usb-phy@c200 {
+- compatible = "brcm,bcm4908-usb-phy";
+- reg = <0xc200 0x100>;
+- reg-names = "ctrl";
+- power-domains = <&pmb BCM_PMB_HOST_USB>;
+- dr_mode = "host";
+- brcm,has-xhci;
+- brcm,has-eohci;
+- #phy-cells = <1>;
+- status = "disabled";
+- };
+-
+- ehci: usb@c300 {
+- compatible = "generic-ehci";
+- reg = <0xc300 0x100>;
+- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+- phys = <&usb_phy PHY_TYPE_USB2>;
+- status = "disabled";
+- };
+-
+- ohci: usb@c400 {
+- compatible = "generic-ohci";
+- reg = <0xc400 0x100>;
+- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+- phys = <&usb_phy PHY_TYPE_USB2>;
+- status = "disabled";
+- };
+-
+- xhci: usb@d000 {
+- compatible = "generic-xhci";
+- reg = <0xd000 0x8c8>;
+- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+- phys = <&usb_phy PHY_TYPE_USB3>;
+- status = "disabled";
+- };
+-
+- bus@80000 {
+- compatible = "simple-bus";
+- #size-cells = <1>;
+- #address-cells = <1>;
+- ranges = <0 0x80000 0x50000>;
+-
+- ethernet-switch@0 {
+- compatible = "brcm,bcm4908-switch";
+- reg = <0x0 0x40000>,
+- <0x40000 0x110>,
+- <0x40340 0x30>,
+- <0x40380 0x30>,
+- <0x40600 0x34>,
+- <0x40800 0x208>;
+- reg-names = "core", "reg", "intrl2_0",
+- "intrl2_1", "fcb", "acb";
+- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+- brcm,num-gphy = <5>;
+- brcm,num-rgmii-ports = <2>;
+-
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- ports: ports {
+- #address-cells = <1>;
+- #size-cells = <0>;
+-
+- port@0 {
+- reg = <0>;
+- phy-mode = "internal";
+- phy-handle = <&phy8>;
+- };
+-
+- port@1 {
+- reg = <1>;
+- phy-mode = "internal";
+- phy-handle = <&phy9>;
+- };
+-
+- port@2 {
+- reg = <2>;
+- phy-mode = "internal";
+- phy-handle = <&phy10>;
+- };
+-
+- port@3 {
+- reg = <3>;
+- phy-mode = "internal";
+- phy-handle = <&phy11>;
+- };
+-
+- port@8 {
+- reg = <8>;
+- phy-mode = "internal";
+- ethernet = <&enet>;
+-
+- fixed-link {
+- speed = <1000>;
+- full-duplex;
+- };
+- };
+- };
+- };
+-
+- mdio: mdio@405c0 {
+- compatible = "brcm,unimac-mdio";
+- reg = <0x405c0 0x8>;
+- reg-names = "mdio";
+- #size-cells = <0>;
+- #address-cells = <1>;
+-
+- phy8: ethernet-phy@8 {
+- reg = <8>;
+- };
+-
+- phy9: ethernet-phy@9 {
+- reg = <9>;
+- };
+-
+- phy10: ethernet-phy@a {
+- reg = <10>;
+- };
+-
+- phy11: ethernet-phy@b {
+- reg = <11>;
+- };
+-
+- phy12: ethernet-phy@c {
+- reg = <12>;
+- };
+- };
+- };
+-
+- procmon: syscon@280000 {
+- compatible = "simple-bus";
+- reg = <0x280000 0x1000>;
+- ranges;
+-
+- #address-cells = <1>;
+- #size-cells = <1>;
+-
+- pmb: power-controller@2800c0 {
+- compatible = "brcm,bcm4908-pmb";
+- reg = <0x2800c0 0x40>;
+- #power-domain-cells = <1>;
+- };
+- };
+- };
+-
+- bus@ff800000 {
+- compatible = "simple-bus";
+- #address-cells = <1>;
+- #size-cells = <1>;
+- ranges = <0x00 0x00 0xff800000 0x3000>;
+-
+- twd: timer-mfd@400 {
+- compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+- reg = <0x400 0x4c>;
+- ranges = <0x0 0x400 0x4c>;
+-
+- #address-cells = <1>;
+- #size-cells = <1>;
+-
+- watchdog@28 {
+- compatible = "brcm,bcm6345-wdt";
+- reg = <0x28 0x8>;
+- };
+- };
+-
+- gpio0: gpio-controller@500 {
+- compatible = "brcm,bcm6345-gpio";
+- reg-names = "dirout", "dat";
+- reg = <0x500 0x28>, <0x528 0x28>;
+-
+- #gpio-cells = <2>;
+- gpio-controller;
+- };
+-
+- pinctrl@560 {
+- compatible = "brcm,bcm4908-pinctrl";
+- reg = <0x560 0x10>;
+-
+- pins_led_0_a: led_0-a-pins {
+- function = "led_0";
+- groups = "led_0_grp_a";
+- };
+-
+- pins_led_1_a: led_1-a-pins {
+- function = "led_1";
+- groups = "led_1_grp_a";
+- };
+-
+- pins_led_2_a: led_2-a-pins {
+- function = "led_2";
+- groups = "led_2_grp_a";
+- };
+-
+- pins_led_3_a: led_3-a-pins {
+- function = "led_3";
+- groups = "led_3_grp_a";
+- };
+-
+- pins_led_4_a: led_4-a-pins {
+- function = "led_4";
+- groups = "led_4_grp_a";
+- };
+-
+- pins_led_5_a: led_5-a-pins {
+- function = "led_5";
+- groups = "led_5_grp_a";
+- };
+-
+- pins_led_6_a: led_6-a-pins {
+- function = "led_6";
+- groups = "led_6_grp_a";
+- };
+-
+- pins_led_7_a: led_7-a-pins {
+- function = "led_7";
+- groups = "led_7_grp_a";
+- };
+-
+- pins_led_8_a: led_8-a-pins {
+- function = "led_8";
+- groups = "led_8_grp_a";
+- };
+-
+- pins_led_9_a: led_9-a-pins {
+- function = "led_9";
+- groups = "led_9_grp_a";
+- };
+-
+- pins_led_10_a: led_10-a-pins {
+- function = "led_10";
+- groups = "led_10_grp_a";
+- };
+-
+- pins_led_11_a: led_11-a-pins {
+- function = "led_11";
+- groups = "led_11_grp_a";
+- };
+-
+- pins_led_12_a: led_12-a-pins {
+- function = "led_12";
+- groups = "led_12_grp_a";
+- };
+-
+- pins_led_13_a: led_13-a-pins {
+- function = "led_13";
+- groups = "led_13_grp_a";
+- };
+-
+- pins_led_14_a: led_14-a-pins {
+- function = "led_14";
+- groups = "led_14_grp_a";
+- };
+-
+- pins_led_15_a: led_15-a-pins {
+- function = "led_15";
+- groups = "led_15_grp_a";
+- };
+-
+- pins_led_16_a: led_16-a-pins {
+- function = "led_16";
+- groups = "led_16_grp_a";
+- };
+-
+- pins_led_17_a: led_17-a-pins {
+- function = "led_17";
+- groups = "led_17_grp_a";
+- };
+-
+- pins_led_18_a: led_18-a-pins {
+- function = "led_18";
+- groups = "led_18_grp_a";
+- };
+-
+- pins_led_19_a: led_19-a-pins {
+- function = "led_19";
+- groups = "led_19_grp_a";
+- };
+-
+- pins_led_20_a: led_20-a-pins {
+- function = "led_20";
+- groups = "led_20_grp_a";
+- };
+-
+- pins_led_21_a: led_21-a-pins {
+- function = "led_21";
+- groups = "led_21_grp_a";
+- };
+-
+- pins_led_22_a: led_22-a-pins {
+- function = "led_22";
+- groups = "led_22_grp_a";
+- };
+-
+- pins_led_23_a: led_23-a-pins {
+- function = "led_23";
+- groups = "led_23_grp_a";
+- };
+-
+- pins_led_24_a: led_24-a-pins {
+- function = "led_24";
+- groups = "led_24_grp_a";
+- };
+-
+- pins_led_25_a: led_25-a-pins {
+- function = "led_25";
+- groups = "led_25_grp_a";
+- };
+-
+- pins_led_26_a: led_26-a-pins {
+- function = "led_26";
+- groups = "led_26_grp_a";
+- };
+-
+- pins_led_27_a: led_27-a-pins {
+- function = "led_27";
+- groups = "led_27_grp_a";
+- };
+-
+- pins_led_28_a: led_28-a-pins {
+- function = "led_28";
+- groups = "led_28_grp_a";
+- };
+-
+- pins_led_29_a: led_29-a-pins {
+- function = "led_29";
+- groups = "led_29_grp_a";
+- };
+-
+- pins_led_30_a: led_30-a-pins {
+- function = "led_30";
+- groups = "led_30_grp_a";
+- };
+-
+- pins_led_31_a: led_31-a-pins {
+- function = "led_31";
+- groups = "led_31_grp_a";
+- };
+-
+- pins_hs_uart: hs_uart-pins {
+- function = "hs_uart";
+- groups = "hs_uart_grp";
+- };
+-
+- pins_i2c_a: i2c-a-pins {
+- function = "i2c";
+- groups = "i2c_grp_a";
+- };
+-
+- pins_i2c_b: i2c-b-pins {
+- function = "i2c";
+- groups = "i2c_grp_b";
+- };
+-
+- pins_i2s: i2s-pins {
+- function = "i2s";
+- groups = "i2s_grp";
+- };
+-
+- pins_nand_ctrl: nand_ctrl-pins {
+- function = "nand_ctrl";
+- groups = "nand_ctrl_grp";
+- };
+-
+- pins_nand_data: nand_data-pins {
+- function = "nand_data";
+- groups = "nand_data_grp";
+- };
+-
+- pins_emmc_ctrl: emmc_ctrl-pins {
+- function = "emmc_ctrl";
+- groups = "emmc_ctrl_grp";
+- };
+-
+- pins_usb0_pwr: usb0_pwr-pins {
+- function = "usb0_pwr";
+- groups = "usb0_pwr_grp";
+- };
+-
+- pins_usb1_pwr: usb1_pwr-pins {
+- function = "usb1_pwr";
+- groups = "usb1_pwr_grp";
+- };
+- };
+-
+- uart0: serial@640 {
+- compatible = "brcm,bcm6345-uart";
+- reg = <0x640 0x18>;
+- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+- clocks = <&periph_clk>;
+- clock-names = "refclk";
+- status = "okay";
+- };
+-
+- leds: leds@800 {
+- compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
+- reg = <0x800 0xdc>;
+-
+- #address-cells = <1>;
+- #size-cells = <0>;
+- };
+-
+- nand-controller@1800 {
+- #address-cells = <1>;
+- #size-cells = <0>;
+- compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+- reg = <0x1800 0x600>, <0x2000 0x10>;
+- reg-names = "nand", "nand-int-base";
+- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+- interrupt-names = "nand";
+- status = "okay";
+-
+- nandcs: nand@0 {
+- compatible = "brcm,nandcs";
+- reg = <0>;
+- };
+- };
+-
+- i2c@2100 {
+- compatible = "brcm,brcmper-i2c";
+- reg = <0x2100 0x58>;
+- clock-frequency = <97500>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pins_i2c_a>;
+- status = "disabled";
+- };
+-
+- misc@2600 {
+- compatible = "brcm,misc", "simple-mfd";
+- reg = <0x2600 0xe4>;
+-
+- #address-cells = <1>;
+- #size-cells = <1>;
+- ranges = <0x00 0x2600 0xe4>;
+-
+- reset-controller@2644 {
+- compatible = "brcm,bcm4908-misc-pcie-reset";
+- reg = <0x44 0x04>;
+- #reset-cells = <1>;
+- };
+- };
+- };
+-
+- reboot {
+- compatible = "syscon-reboot";
+- regmap = <&twd>;
+- offset = <0x34>;
+- mask = <1>;
+- };
+-};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
+@@ -0,0 +1,157 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++
++#include "bcm4906.dtsi"
++
++/ {
++ compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
++ model = "Netgear R8000P";
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x00 0x00 0x00 0x20000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-power-white {
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
++ };
++
++ led-power-amber {
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_AMBER>;
++ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
++ };
++
++ led-wps {
++ function = LED_FUNCTION_WPS;
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
++ };
++
++ led-2ghz {
++ function = "2ghz";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
++ };
++
++ led-5ghz-1 {
++ function = "5ghz-1";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
++ };
++
++ led-5ghz-2 {
++ function = "5ghz-2";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
++ };
++
++ led-usb2 {
++ function = "usb2";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
++ };
++
++ led-usb3 {
++ function = "usb3";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
++ };
++
++ led-wifi {
++ function = "wifi";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&enet {
++ nvmem-cells = <&base_mac_addr>;
++ nvmem-cell-names = "mac-address";
++};
++
++&usb_phy {
++ brcm,ioc = <1>;
++ status = "okay";
++};
++
++&ehci {
++ status = "okay";
++};
++
++&ohci {
++ status = "okay";
++};
++
++&xhci {
++ status = "okay";
++};
++
++&ports {
++ port@0 {
++ label = "lan4";
++ };
++
++ port@1 {
++ label = "lan3";
++ };
++
++ port@2 {
++ label = "lan2";
++ };
++
++ port@3 {
++ label = "lan1";
++ };
++
++ port@7 {
++ reg = <7>;
++ phy-mode = "internal";
++ phy-handle = <&phy12>;
++ label = "wan";
++ };
++};
++
++&nandcs {
++ nand-ecc-strength = <4>;
++ nand-ecc-step-size = <512>;
++ nand-on-flash-bbt;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ compatible = "nvmem-cells";
++ label = "cferom";
++ reg = <0x0 0x100000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0 0x0 0x100000>;
++
++ base_mac_addr: mac@106a0 {
++ reg = <0x106a0 0x6>;
++ };
++ };
++
++ partition@100000 {
++ compatible = "brcm,bcm4908-firmware";
++ label = "firmware";
++ reg = <0x100000 0x4400000>;
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
+@@ -0,0 +1,182 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++
++#include "bcm4906.dtsi"
++
++/ {
++ compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
++ model = "TP-Link Archer C2300 V1";
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x00 0x00 0x00 0x20000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-power {
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
++ };
++
++ led-2ghz {
++ function = "2ghz";
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
++ };
++
++ led-5ghz {
++ function = "5ghz";
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
++ };
++
++ led-wan-amber {
++ function = LED_FUNCTION_WAN;
++ color = <LED_COLOR_ID_AMBER>;
++ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-wan-blue {
++ function = LED_FUNCTION_WAN;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
++ };
++
++ led-lan {
++ function = LED_FUNCTION_LAN;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
++ };
++
++ led-wps {
++ function = LED_FUNCTION_WPS;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
++ };
++
++ led-usb2 {
++ function = "usb2";
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
++ };
++
++ led-usb3 {
++ function = "usbd3";
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
++ };
++
++ led-brightness {
++ function = LED_FUNCTION_BACKLIGHT;
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-keys-polled {
++ compatible = "gpio-keys-polled";
++ poll-interval = <100>;
++
++ key-brightness {
++ label = "LEDs";
++ linux,code = <KEY_BRIGHTNESS_ZERO>;
++ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
++ };
++
++ key-wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
++ };
++
++ key-wifi {
++ label = "WiFi";
++ linux,code = <KEY_RFKILL>;
++ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
++ };
++
++ key-restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&usb_phy {
++ brcm,ioc = <1>;
++ status = "okay";
++};
++
++&ehci {
++ status = "okay";
++};
++
++&ohci {
++ status = "okay";
++};
++
++&xhci {
++ status = "okay";
++};
++
++&ports {
++ port@0 {
++ label = "lan4";
++ };
++
++ port@1 {
++ label = "lan3";
++ };
++
++ port@2 {
++ label = "lan2";
++ };
++
++ port@3 {
++ label = "lan1";
++ };
++
++ port@7 {
++ reg = <7>;
++ phy-mode = "internal";
++ phy-handle = <&phy12>;
++ label = "wan";
++ };
++};
++
++&nandcs {
++ nand-ecc-strength = <4>;
++ nand-ecc-step-size = <512>;
++ nand-on-flash-bbt;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ partitions {
++ compatible = "brcm,bcm4908-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ label = "cferom";
++ reg = <0x0 0x100000>;
++ };
++
++ partition@100000 {
++ compatible = "brcm,bcm4908-firmware";
++ reg = <0x100000 0x3900000>;
++ };
++
++ partition@5800000 {
++ compatible = "brcm,bcm4908-firmware";
++ reg = <0x3a00000 0x3900000>;
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
+@@ -0,0 +1,26 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include "bcm4908.dtsi"
++
++/ {
++ cpus {
++ /delete-node/ cpu@2;
++
++ /delete-node/ cpu@3;
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
++ pmu {
++ compatible = "arm,cortex-a53-pmu";
++ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-affinity = <&cpu0>, <&cpu1>;
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
+@@ -0,0 +1,207 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++
++#include "bcm4908.dtsi"
++
++/ {
++ compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
++ model = "Asus GT-AC5300";
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x00 0x00 0x00 0x40000000>;
++ };
++
++ gpio-keys-polled {
++ compatible = "gpio-keys-polled";
++ poll-interval = <100>;
++
++ key-wifi {
++ label = "WiFi";
++ linux,code = <KEY_RFKILL>;
++ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
++ };
++
++ key-wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
++ };
++
++ key-restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
++ };
++
++ key-brightness {
++ label = "LEDs";
++ linux,code = <KEY_BRIGHTNESS_ZERO>;
++ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&enet {
++ nvmem-cells = <&base_mac_addr>;
++ nvmem-cell-names = "mac-address";
++};
++
++&usb_phy {
++ brcm,ioc = <1>;
++ status = "okay";
++};
++
++&ehci {
++ status = "okay";
++};
++
++&ohci {
++ status = "okay";
++};
++
++&xhci {
++ status = "okay";
++};
++
++&ports {
++ port@0 {
++ label = "lan2";
++ };
++
++ port@1 {
++ label = "lan1";
++ };
++
++ port@2 {
++ label = "lan6";
++ };
++
++ port@3 {
++ label = "lan5";
++ };
++
++ /* External BCM53134S switch */
++ port@7 {
++ label = "sw";
++ reg = <7>;
++ phy-mode = "rgmii";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++};
++
++&mdio {
++ /* lan8 */
++ ethernet-phy@0 {
++ reg = <0>;
++ };
++
++ /* lan7 */
++ ethernet-phy@1 {
++ reg = <1>;
++ };
++
++ /* lan4 */
++ ethernet-phy@2 {
++ reg = <2>;
++ };
++
++ /* lan3 */
++ ethernet-phy@3 {
++ reg = <3>;
++ };
++};
++
++&leds {
++ led-power@11 {
++ reg = <0x11>;
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_WHITE>;
++ default-state = "on";
++ active-low;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_led_17_a>;
++ };
++
++ led-wan-red@12 {
++ reg = <0x12>;
++ function = LED_FUNCTION_WAN;
++ color = <LED_COLOR_ID_RED>;
++ active-low;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_led_18_a>;
++ };
++
++ led-wps@14 {
++ reg = <0x14>;
++ function = LED_FUNCTION_WPS;
++ color = <LED_COLOR_ID_WHITE>;
++ active-low;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_led_20_a>;
++ };
++
++ led-wan-white@15 {
++ reg = <0x15>;
++ function = LED_FUNCTION_WAN;
++ color = <LED_COLOR_ID_WHITE>;
++ active-low;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_led_21_a>;
++ };
++
++ led-lan@19 {
++ reg = <0x19>;
++ function = LED_FUNCTION_LAN;
++ color = <LED_COLOR_ID_WHITE>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_led_25_a>;
++ };
++};
++
++&nandcs {
++ nand-ecc-strength = <4>;
++ nand-ecc-step-size = <512>;
++ nand-on-flash-bbt;
++ brcm,nand-has-wp;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ partitions {
++ compatible = "brcm,bcm4908-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ compatible = "nvmem-cells";
++ label = "cferom";
++ reg = <0x0 0x100000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0 0x0 0x100000>;
++
++ base_mac_addr: mac@106a0 {
++ reg = <0x106a0 0x6>;
++ };
++ };
++
++ partition@100000 {
++ compatible = "brcm,bcm4908-firmware";
++ reg = <0x100000 0x5700000>;
++ };
++
++ partition@5800000 {
++ compatible = "brcm,bcm4908-firmware";
++ reg = <0x5800000 0x5700000>;
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
+@@ -0,0 +1,50 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include "bcm4908.dtsi"
++
++/ {
++ compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
++ model = "Netgear RAXE500";
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x00 0x00 0x00 0x40000000>;
++ };
++};
++
++&ehci {
++ status = "okay";
++};
++
++&ohci {
++ status = "okay";
++};
++
++&xhci {
++ status = "okay";
++};
++
++&ports {
++ port@0 {
++ label = "lan4";
++ };
++
++ port@1 {
++ label = "lan3";
++ };
++
++ port@2 {
++ label = "lan2";
++ };
++
++ port@3 {
++ label = "lan1";
++ };
++
++ port@7 {
++ reg = <7>;
++ phy-mode = "internal";
++ phy-handle = <&phy12>;
++ label = "wan";
++ };
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+@@ -0,0 +1,575 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++#include <dt-bindings/phy/phy.h>
++#include <dt-bindings/soc/bcm-pmb.h>
++
++/dts-v1/;
++
++/ {
++ interrupt-parent = <&gic>;
++
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ cpus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ cpu0: cpu@0 {
++ device_type = "cpu";
++ compatible = "brcm,brahma-b53";
++ reg = <0x0>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0xfff8>;
++ next-level-cache = <&l2>;
++ };
++
++ cpu1: cpu@1 {
++ device_type = "cpu";
++ compatible = "brcm,brahma-b53";
++ reg = <0x1>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0xfff8>;
++ next-level-cache = <&l2>;
++ };
++
++ cpu2: cpu@2 {
++ device_type = "cpu";
++ compatible = "brcm,brahma-b53";
++ reg = <0x2>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0xfff8>;
++ next-level-cache = <&l2>;
++ };
++
++ cpu3: cpu@3 {
++ device_type = "cpu";
++ compatible = "brcm,brahma-b53";
++ reg = <0x3>;
++ enable-method = "spin-table";
++ cpu-release-addr = <0x0 0xfff8>;
++ next-level-cache = <&l2>;
++ };
++
++ l2: l2-cache0 {
++ compatible = "cache";
++ };
++ };
++
++ axi@81000000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x00 0x00 0x81000000 0x4000>;
++
++ gic: interrupt-controller@1000 {
++ compatible = "arm,gic-400";
++ #interrupt-cells = <3>;
++ #address-cells = <0>;
++ interrupt-controller;
++ reg = <0x1000 0x1000>,
++ <0x2000 0x2000>;
++ };
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
++ };
++
++ pmu {
++ compatible = "arm,cortex-a53-pmu";
++ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
++ };
++
++ clocks {
++ periph_clk: periph_clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <50000000>;
++ clock-output-names = "periph";
++ };
++ };
++
++ soc {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x00 0x00 0x80000000 0x281000>;
++
++ enet: ethernet@2000 {
++ compatible = "brcm,bcm4908-enet";
++ reg = <0x2000 0x1000>;
++
++ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "rx", "tx";
++ };
++
++ usb_phy: usb-phy@c200 {
++ compatible = "brcm,bcm4908-usb-phy";
++ reg = <0xc200 0x100>;
++ reg-names = "ctrl";
++ power-domains = <&pmb BCM_PMB_HOST_USB>;
++ dr_mode = "host";
++ brcm,has-xhci;
++ brcm,has-eohci;
++ #phy-cells = <1>;
++ status = "disabled";
++ };
++
++ ehci: usb@c300 {
++ compatible = "generic-ehci";
++ reg = <0xc300 0x100>;
++ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&usb_phy PHY_TYPE_USB2>;
++ status = "disabled";
++ };
++
++ ohci: usb@c400 {
++ compatible = "generic-ohci";
++ reg = <0xc400 0x100>;
++ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&usb_phy PHY_TYPE_USB2>;
++ status = "disabled";
++ };
++
++ xhci: usb@d000 {
++ compatible = "generic-xhci";
++ reg = <0xd000 0x8c8>;
++ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&usb_phy PHY_TYPE_USB3>;
++ status = "disabled";
++ };
++
++ bus@80000 {
++ compatible = "simple-bus";
++ #size-cells = <1>;
++ #address-cells = <1>;
++ ranges = <0 0x80000 0x50000>;
++
++ ethernet-switch@0 {
++ compatible = "brcm,bcm4908-switch";
++ reg = <0x0 0x40000>,
++ <0x40000 0x110>,
++ <0x40340 0x30>,
++ <0x40380 0x30>,
++ <0x40600 0x34>,
++ <0x40800 0x208>;
++ reg-names = "core", "reg", "intrl2_0",
++ "intrl2_1", "fcb", "acb";
++ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
++ brcm,num-gphy = <5>;
++ brcm,num-rgmii-ports = <2>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ ports: ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ phy-mode = "internal";
++ phy-handle = <&phy8>;
++ };
++
++ port@1 {
++ reg = <1>;
++ phy-mode = "internal";
++ phy-handle = <&phy9>;
++ };
++
++ port@2 {
++ reg = <2>;
++ phy-mode = "internal";
++ phy-handle = <&phy10>;
++ };
++
++ port@3 {
++ reg = <3>;
++ phy-mode = "internal";
++ phy-handle = <&phy11>;
++ };
++
++ port@8 {
++ reg = <8>;
++ phy-mode = "internal";
++ ethernet = <&enet>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++ };
++
++ mdio: mdio@405c0 {
++ compatible = "brcm,unimac-mdio";
++ reg = <0x405c0 0x8>;
++ reg-names = "mdio";
++ #size-cells = <0>;
++ #address-cells = <1>;
++
++ phy8: ethernet-phy@8 {
++ reg = <8>;
++ };
++
++ phy9: ethernet-phy@9 {
++ reg = <9>;
++ };
++
++ phy10: ethernet-phy@a {
++ reg = <10>;
++ };
++
++ phy11: ethernet-phy@b {
++ reg = <11>;
++ };
++
++ phy12: ethernet-phy@c {
++ reg = <12>;
++ };
++ };
++ };
++
++ procmon: syscon@280000 {
++ compatible = "simple-bus";
++ reg = <0x280000 0x1000>;
++ ranges;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ pmb: power-controller@2800c0 {
++ compatible = "brcm,bcm4908-pmb";
++ reg = <0x2800c0 0x40>;
++ #power-domain-cells = <1>;
++ };
++ };
++ };
++
++ bus@ff800000 {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x00 0x00 0xff800000 0x3000>;
++
++ twd: timer-mfd@400 {
++ compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
++ reg = <0x400 0x4c>;
++ ranges = <0x0 0x400 0x4c>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ watchdog@28 {
++ compatible = "brcm,bcm6345-wdt";
++ reg = <0x28 0x8>;
++ };
++ };
++
++ gpio0: gpio-controller@500 {
++ compatible = "brcm,bcm6345-gpio";
++ reg-names = "dirout", "dat";
++ reg = <0x500 0x28>, <0x528 0x28>;
++
++ #gpio-cells = <2>;
++ gpio-controller;
++ };
++
++ pinctrl@560 {
++ compatible = "brcm,bcm4908-pinctrl";
++ reg = <0x560 0x10>;
++
++ pins_led_0_a: led_0-a-pins {
++ function = "led_0";
++ groups = "led_0_grp_a";
++ };
++
++ pins_led_1_a: led_1-a-pins {
++ function = "led_1";
++ groups = "led_1_grp_a";
++ };
++
++ pins_led_2_a: led_2-a-pins {
++ function = "led_2";
++ groups = "led_2_grp_a";
++ };
++
++ pins_led_3_a: led_3-a-pins {
++ function = "led_3";
++ groups = "led_3_grp_a";
++ };
++
++ pins_led_4_a: led_4-a-pins {
++ function = "led_4";
++ groups = "led_4_grp_a";
++ };
++
++ pins_led_5_a: led_5-a-pins {
++ function = "led_5";
++ groups = "led_5_grp_a";
++ };
++
++ pins_led_6_a: led_6-a-pins {
++ function = "led_6";
++ groups = "led_6_grp_a";
++ };
++
++ pins_led_7_a: led_7-a-pins {
++ function = "led_7";
++ groups = "led_7_grp_a";
++ };
++
++ pins_led_8_a: led_8-a-pins {
++ function = "led_8";
++ groups = "led_8_grp_a";
++ };
++
++ pins_led_9_a: led_9-a-pins {
++ function = "led_9";
++ groups = "led_9_grp_a";
++ };
++
++ pins_led_10_a: led_10-a-pins {
++ function = "led_10";
++ groups = "led_10_grp_a";
++ };
++
++ pins_led_11_a: led_11-a-pins {
++ function = "led_11";
++ groups = "led_11_grp_a";
++ };
++
++ pins_led_12_a: led_12-a-pins {
++ function = "led_12";
++ groups = "led_12_grp_a";
++ };
++
++ pins_led_13_a: led_13-a-pins {
++ function = "led_13";
++ groups = "led_13_grp_a";
++ };
++
++ pins_led_14_a: led_14-a-pins {
++ function = "led_14";
++ groups = "led_14_grp_a";
++ };
++
++ pins_led_15_a: led_15-a-pins {
++ function = "led_15";
++ groups = "led_15_grp_a";
++ };
++
++ pins_led_16_a: led_16-a-pins {
++ function = "led_16";
++ groups = "led_16_grp_a";
++ };
++
++ pins_led_17_a: led_17-a-pins {
++ function = "led_17";
++ groups = "led_17_grp_a";
++ };
++
++ pins_led_18_a: led_18-a-pins {
++ function = "led_18";
++ groups = "led_18_grp_a";
++ };
++
++ pins_led_19_a: led_19-a-pins {
++ function = "led_19";
++ groups = "led_19_grp_a";
++ };
++
++ pins_led_20_a: led_20-a-pins {
++ function = "led_20";
++ groups = "led_20_grp_a";
++ };
++
++ pins_led_21_a: led_21-a-pins {
++ function = "led_21";
++ groups = "led_21_grp_a";
++ };
++
++ pins_led_22_a: led_22-a-pins {
++ function = "led_22";
++ groups = "led_22_grp_a";
++ };
++
++ pins_led_23_a: led_23-a-pins {
++ function = "led_23";
++ groups = "led_23_grp_a";
++ };
++
++ pins_led_24_a: led_24-a-pins {
++ function = "led_24";
++ groups = "led_24_grp_a";
++ };
++
++ pins_led_25_a: led_25-a-pins {
++ function = "led_25";
++ groups = "led_25_grp_a";
++ };
++
++ pins_led_26_a: led_26-a-pins {
++ function = "led_26";
++ groups = "led_26_grp_a";
++ };
++
++ pins_led_27_a: led_27-a-pins {
++ function = "led_27";
++ groups = "led_27_grp_a";
++ };
++
++ pins_led_28_a: led_28-a-pins {
++ function = "led_28";
++ groups = "led_28_grp_a";
++ };
++
++ pins_led_29_a: led_29-a-pins {
++ function = "led_29";
++ groups = "led_29_grp_a";
++ };
++
++ pins_led_30_a: led_30-a-pins {
++ function = "led_30";
++ groups = "led_30_grp_a";
++ };
++
++ pins_led_31_a: led_31-a-pins {
++ function = "led_31";
++ groups = "led_31_grp_a";
++ };
++
++ pins_hs_uart: hs_uart-pins {
++ function = "hs_uart";
++ groups = "hs_uart_grp";
++ };
++
++ pins_i2c_a: i2c-a-pins {
++ function = "i2c";
++ groups = "i2c_grp_a";
++ };
++
++ pins_i2c_b: i2c-b-pins {
++ function = "i2c";
++ groups = "i2c_grp_b";
++ };
++
++ pins_i2s: i2s-pins {
++ function = "i2s";
++ groups = "i2s_grp";
++ };
++
++ pins_nand_ctrl: nand_ctrl-pins {
++ function = "nand_ctrl";
++ groups = "nand_ctrl_grp";
++ };
++
++ pins_nand_data: nand_data-pins {
++ function = "nand_data";
++ groups = "nand_data_grp";
++ };
++
++ pins_emmc_ctrl: emmc_ctrl-pins {
++ function = "emmc_ctrl";
++ groups = "emmc_ctrl_grp";
++ };
++
++ pins_usb0_pwr: usb0_pwr-pins {
++ function = "usb0_pwr";
++ groups = "usb0_pwr_grp";
++ };
++
++ pins_usb1_pwr: usb1_pwr-pins {
++ function = "usb1_pwr";
++ groups = "usb1_pwr_grp";
++ };
++ };
++
++ uart0: serial@640 {
++ compatible = "brcm,bcm6345-uart";
++ reg = <0x640 0x18>;
++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&periph_clk>;
++ clock-names = "refclk";
++ status = "okay";
++ };
++
++ leds: leds@800 {
++ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
++ reg = <0x800 0xdc>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ nand-controller@1800 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
++ reg = <0x1800 0x600>, <0x2000 0x10>;
++ reg-names = "nand", "nand-int-base";
++ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "nand";
++ status = "okay";
++
++ nandcs: nand@0 {
++ compatible = "brcm,nandcs";
++ reg = <0>;
++ };
++ };
++
++ i2c@2100 {
++ compatible = "brcm,brcmper-i2c";
++ reg = <0x2100 0x58>;
++ clock-frequency = <97500>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_i2c_a>;
++ status = "disabled";
++ };
++
++ misc@2600 {
++ compatible = "brcm,misc", "simple-mfd";
++ reg = <0x2600 0xe4>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x00 0x2600 0xe4>;
++
++ reset-controller@2644 {
++ compatible = "brcm,bcm4908-misc-pcie-reset";
++ reg = <0x44 0x04>;
++ #reset-cells = <1>;
++ };
++ };
++ };
++
++ reboot {
++ compatible = "syscon-reboot";
++ regmap = <&twd>;
++ offset = <0x34>;
++ mask = <1>;
++ };
++};
projects / openwrt / openwrt.git / commitdiff