ar71xx: add kernel support for the OpenMesh OM5P-AC board
authorJohn Crispin <john@openwrt.org>
Sat, 9 Apr 2016 10:25:47 +0000 (10:25 +0000)
committerJohn Crispin <john@openwrt.org>
Sat, 9 Apr 2016 10:25:47 +0000 (10:25 +0000)
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
SVN-Revision: 49141

target/linux/ar71xx/config-4.1
target/linux/ar71xx/config-4.4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

index d6ad85047c4a1ed482f4e77da55e95153cd890f3..0ba1f538b92d92f8eacc937be44f73c90d2999ba 100644 (file)
@@ -109,6 +109,7 @@ CONFIG_ATH79_MACH_NBG460N=y
 CONFIG_ATH79_MACH_NBG6716=y
 CONFIG_ATH79_MACH_OM2P=y
 CONFIG_ATH79_MACH_OM5P=y
+CONFIG_ATH79_MACH_OM5P_AC=y
 CONFIG_ATH79_MACH_OMY_X1=y
 CONFIG_ATH79_MACH_ONION_OMEGA=y
 CONFIG_ATH79_MACH_PB42=y
index 49cecc5a3f2dbb36dd36118fd4194e9246a6a236..51178297a3d4690737eec4f8dd03866c2b7d5459 100644 (file)
@@ -112,6 +112,7 @@ CONFIG_ATH79_MACH_NBG460N=y
 CONFIG_ATH79_MACH_NBG6716=y
 CONFIG_ATH79_MACH_OM2P=y
 CONFIG_ATH79_MACH_OM5P=y
+CONFIG_ATH79_MACH_OM5P_AC=y
 CONFIG_ATH79_MACH_OMY_X1=y
 CONFIG_ATH79_MACH_ONION_OMEGA=y
 CONFIG_ATH79_MACH_PB42=y
index f47f1b97dcdd2d7942a7c090f57b191ddbdfce86..b12c42aa71a921e8d26e9eade7a18f0393793dda 100644 (file)
@@ -861,6 +861,15 @@ config ATH79_MACH_OM5P
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_OM5P_AC
+       bool "OpenMesh OM5P-AC board support"
+       select SOC_QCA955X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_OMY_X1
        bool "OMYlink OMY X1 support"
        select SOC_AR934X
index 74376b22948acfc59fa23957717e08411ee6054a..484dda0e28809cd4499d48cda311b9e077a35492 100644 (file)
@@ -115,6 +115,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
 obj-$(CONFIG_ATH79_MACH_NBG460N)       += mach-nbg460n.o
 obj-$(CONFIG_ATH79_MACH_OM2P)          += mach-om2p.o
 obj-$(CONFIG_ATH79_MACH_OM5P)          += mach-om5p.o
+obj-$(CONFIG_ATH79_MACH_OM5P_AC)       += mach-om5pac.o
 obj-$(CONFIG_ATH79_MACH_OMY_X1)                += mach-omy-x1.o
 obj-$(CONFIG_ATH79_MACH_ONION_OMEGA)  += mach-onion-omega.o
 obj-$(CONFIG_ATH79_MACH_PB42)          += mach-pb42.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c
new file mode 100644 (file)
index 0000000..f6974af
--- /dev/null
@@ -0,0 +1,193 @@
+/*
+ *  OpenMesh OM5P-AC support
+ *
+ *  Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
+ *  Copyright (C) 2014 Sven Eckelmann <sven@open-mesh.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/platform_data/phy-at803x.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define OM5PAC_GPIO_LED_POWER  18
+#define OM5PAC_GPIO_LED_GREEN  21
+#define OM5PAC_GPIO_LED_RED    23
+#define OM5PAC_GPIO_LED_YELLOW 22
+#define OM5PAC_GPIO_LED_LAN    20
+#define OM5PAC_GPIO_LED_WAN    19
+#define OM5PAC_GPIO_I2C_SCL    12
+#define OM5PAC_GPIO_I2C_SDA    11
+
+#define OM5PAC_KEYS_POLL_INTERVAL      20      /* msecs */
+#define OM5PAC_KEYS_DEBOUNCE_INTERVAL  (3 * OM5PAC_KEYS_POLL_INTERVAL)
+
+#define OM5PAC_WMAC_CALDATA_OFFSET     0x1000
+
+static struct gpio_led om5pac_leds_gpio[] __initdata = {
+       {
+               .name           = "om5pac:blue:power",
+               .gpio           = OM5PAC_GPIO_LED_POWER,
+               .active_low     = 1,
+       }, {
+               .name           = "om5pac:red:wifi",
+               .gpio           = OM5PAC_GPIO_LED_RED,
+               .active_low     = 1,
+       }, {
+               .name           = "om5pac:yellow:wifi",
+               .gpio           = OM5PAC_GPIO_LED_YELLOW,
+               .active_low     = 1,
+       }, {
+               .name           = "om5pac:green:wifi",
+               .gpio           = OM5PAC_GPIO_LED_GREEN,
+               .active_low     = 1,
+       }, {
+               .name           = "om5pac:blue:lan",
+               .gpio           = OM5PAC_GPIO_LED_LAN,
+               .active_low     = 1,
+       }, {
+               .name           = "om5pac:blue:wan",
+               .gpio           = OM5PAC_GPIO_LED_WAN,
+               .active_low     = 1,
+       }
+};
+
+static struct flash_platform_data om5pac_flash_data = {
+       .type = "mx25l12805d",
+};
+
+static struct i2c_gpio_platform_data om5pac_i2c_device_platdata = {
+       .sda_pin                = OM5PAC_GPIO_I2C_SDA,
+       .scl_pin                = OM5PAC_GPIO_I2C_SCL,
+       .udelay                 = 10,
+       .sda_is_open_drain      = 1,
+       .scl_is_open_drain      = 1,
+};
+
+static struct platform_device om5pac_i2c_device = {
+       .name           = "i2c-gpio",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &om5pac_i2c_device_platdata,
+       },
+};
+
+static struct i2c_board_info om5pac_i2c_devs[] __initdata = {
+       {
+               I2C_BOARD_INFO("tmp423", 0x4c),
+       },
+};
+
+static struct at803x_platform_data om5pac_at803x_data = {
+       .disable_smarteee = 1,
+       .enable_rgmii_rx_delay = 1,
+       .enable_rgmii_tx_delay = 1,
+};
+
+static struct mdio_board_info om5pac_mdio0_info[] = {
+       {
+               .bus_id = "ag71xx-mdio.0",
+               .phy_addr = 1,
+               .platform_data = &om5pac_at803x_data,
+       },
+       {
+               .bus_id = "ag71xx-mdio.0",
+               .phy_addr = 2,
+               .platform_data = &om5pac_at803x_data,
+       },
+};
+
+static void __init om5p_ac_setup_qca955x_eth_cfg(u32 mask,
+                                                unsigned int rxd,
+                                                unsigned int rxdv,
+                                                unsigned int txd,
+                                                unsigned int txe)
+{
+       void __iomem *base;
+       u32 t;
+
+       base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
+
+       t = mask;
+       t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
+       t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
+       t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
+       t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
+
+       __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
+
+       iounmap(base);
+}
+
+static void __init om5p_ac_setup(void)
+{
+       u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
+       u8 mac[6];
+
+       /* temperature sensor */
+       platform_device_register(&om5pac_i2c_device);
+       i2c_register_board_info(0, om5pac_i2c_devs,
+                               ARRAY_SIZE(om5pac_i2c_devs));
+
+       ath79_gpio_output_select(OM5PAC_GPIO_LED_WAN, QCA955X_GPIO_OUT_GPIO);
+
+       ath79_register_m25p80(&om5pac_flash_data);
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(om5pac_leds_gpio),
+                                om5pac_leds_gpio);
+
+       ath79_init_mac(mac, art, 0x02);
+       ath79_register_wmac(art + OM5PAC_WMAC_CALDATA_OFFSET, mac);
+
+       om5p_ac_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
+       ath79_register_mdio(0, 0x0);
+
+       mdiobus_register_board_info(om5pac_mdio0_info,
+                                   ARRAY_SIZE(om5pac_mdio0_info));
+
+       ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
+       ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
+
+       /* GMAC0 is connected to the PHY1 */
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+       ath79_eth0_data.phy_mask = BIT(1);
+       ath79_eth0_pll_data.pll_1000 = 0x82000101;
+       ath79_eth0_pll_data.pll_100 = 0x80000101;
+       ath79_eth0_pll_data.pll_10 = 0x80001313;
+       ath79_register_eth(0);
+
+       /* GMAC1 is connected to MDIO1 in SGMII mode */
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+       ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev;
+       ath79_eth1_data.phy_mask = BIT(2);
+       ath79_eth1_pll_data.pll_1000 = 0x03000101;
+       ath79_eth1_pll_data.pll_100 = 0x80000101;
+       ath79_eth1_pll_data.pll_10 = 0x80001313;
+       ath79_eth1_data.speed = SPEED_1000;
+       ath79_eth1_data.duplex = DUPLEX_FULL;
+       ath79_register_eth(1);
+
+       ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_OM5P_AC, "OM5P-AC", "OpenMesh OM5P AC", om5p_ac_setup);
index 307d2dff710bd1435f0a88aa8489717a6ec2ba3e..12e30c7c1de9e2b324a89bda3b07c987bb8aa1c4 100644 (file)
@@ -113,6 +113,7 @@ enum ath79_mach_type {
        ATH79_MACH_OM2P_LC,             /* OpenMesh OM2P-LC */
        ATH79_MACH_OM2Pv2,              /* OpenMesh OM2Pv2 */
        ATH79_MACH_OM2P,                /* OpenMesh OM2P */
+       ATH79_MACH_OM5P_AC,             /* OpenMesh OM5P-AC */
        ATH79_MACH_OM5P_AN,             /* OpenMesh OM5P-AN */
        ATH79_MACH_OM5P,                /* OpenMesh OM5P */
        ATH79_MACH_OMY_X1,              /* OMYlink OMY-X1 */