ipq806x: Sort occurrences of boardame alphabetically
authorLuis Araneda <luaraneda@gmail.com>
Fri, 5 Jan 2018 13:11:16 +0000 (10:11 -0300)
committerMathias Kresin <dev@kresin.me>
Sat, 13 Jan 2018 06:33:03 +0000 (07:33 +0100)
This restores the alphabetical sort that was present
before the renaming of boardname.

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
package/boot/uboot-envtools/files/ipq
target/linux/ipq806x/base-files/etc/board.d/01_leds
target/linux/ipq806x/base-files/etc/board.d/02_network
target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
target/linux/ipq806x/base-files/lib/upgrade/platform.sh
target/linux/ipq806x/image/Makefile

index c3ec01e..4618aac 100644 (file)
@@ -31,13 +31,13 @@ ubootenv_mtdinfo () {
 }
 
 case "$board" in
+linksys,ea8500)
+       ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x20000" "0x20000"
+       ;;
 qcom,ipq8064-ap148 |\
 qcom,ipq8064-db149)
        ubootenv_add_uci_config $(ubootenv_mtdinfo)
        ;;
-linksys,ea8500)
-       ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x20000" "0x20000"
-       ;;
 zyxel,nbg6817)
        ubootenv_add_uci_config "/dev/mtdblock9" "0x0" "0x10000" "0x10000"
        ;;
index f0b087f..b04832f 100755 (executable)
@@ -11,11 +11,10 @@ board=$(board_name)
 boardname="${board##*,}"
 
 case "$board" in
-tplink,c2600)
-       ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
-       ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
-       ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
-       ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
+avm,fritzbox-4040)
+       ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
+       ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
+       ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
        ;;
 netgear,d7800 |\
 netgear,r7500 |\
@@ -26,15 +25,11 @@ netgear,r7800)
        ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:wan" "eth0"
        ucidef_set_led_ide "esata" "eSATA" "${boardname}:white:esata"
        ;;
-avm,fritzbox-4040)
-       ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
-       ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
-       ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
-       ;;
-zyxel,nbg6817)
-       ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt"
-       ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt"
-       ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
+tplink,c2600)
+       ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
+       ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
+       ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
+       ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
        ;;
 tplink,vr2600v)
        ucidef_set_led_usbport "usb" "USB" "${boardname}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
@@ -43,6 +38,11 @@ tplink,vr2600v)
        ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:white:wlan5g" "phy1tpt"
        ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
        ;;
+zyxel,nbg6817)
+       ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt"
+       ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt"
+       ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
+       ;;
 *)
        ;;
 esac
index 8854b9c..74a38ee 100755 (executable)
@@ -12,6 +12,18 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+avm,fritzbox-4040)
+       ucidef_set_interfaces_lan_wan "eth0" "eth1"
+       ucidef_add_switch "switch0" \
+               "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+       ;;
+linksys,ea8500)
+       hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+       ucidef_add_switch "switch0" \
+               "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+       ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+       ;;
 netgear,d7800 |\
 netgear,r7500 |\
 netgear,r7500v2 |\
@@ -21,27 +33,14 @@ tplink,vr2600v)
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
        ;;
-tplink,c2600)
-       ucidef_add_switch "switch0" \
-               "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
-       ;;
 qcom,ipq8064-db149)
        ucidef_set_interface_lan "eth1 eth2 eth3"
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
        ;;
-linksys,ea8500)
-
-       hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-       ucidef_add_switch "switch0" \
-               "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-       ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
-       ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
-       ;;
-avm,fritzbox-4040)
-       ucidef_set_interfaces_lan_wan "eth0" "eth1"
+tplink,c2600)
        ucidef_add_switch "switch0" \
-               "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+               "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
        ;;
 zyxel,nbg6817)
        hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
index dc74df8..4aaa923 100644 (file)
@@ -47,69 +47,69 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
        case "$board" in
-       qcom,ap-dk01.1-c1)
-               ath10kcal_extract "ART" 4096 12064
-               ;;
        avm,fritzbox-4040)
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
+       qcom,ap-dk01.1-c1)
+               ath10kcal_extract "ART" 4096 12064
+               ;;
        esac
        ;;
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
        case "$board" in
-       qcom,ap-dk01.1-c1)
-               ath10kcal_extract "ART" 20480 12064
-               ;;
        avm,fritzbox-4040)
                /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
                ;;
+       qcom,ap-dk01.1-c1)
+               ath10kcal_extract "ART" 20480 12064
+               ;;
        esac
        ;;
 
 "ath10k/pre-cal-pci-0000:01:00.0.bin")
        case $board in
-       tplink,c2600)
-               ath10kcal_extract "radio" 4096 12064
-#              ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
+       linksys,ea8500)
+               hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+               ath10kcal_extract "art" 4096 12064
                ;;
        netgear,d7800 |\
        netgear,r7500v2 |\
        netgear,r7800)
                ath10kcal_extract "art" 4096 12064
                ;;
-       linksys,ea8500)
-               hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-               ath10kcal_extract "art" 4096 12064
-               ;;
-       zyxel,nbg6817)
-               ath10kcal_extract "0:ART" 4096 12064
+       tplink,c2600)
+               ath10kcal_extract "radio" 4096 12064
+#              ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
                ;;
        tplink,vr2600v)
                ath10kcal_extract "ART" 4096 12064
                ;;
+       zyxel,nbg6817)
+               ath10kcal_extract "0:ART" 4096 12064
+               ;;
        esac
        ;;
 "ath10k/pre-cal-pci-0001:01:00.0.bin")
        case $board in
-       tplink,c2600)
-               ath10kcal_extract "radio" 20480 12064
-#              ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
+       linksys,ea8500)
+               hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+               ath10kcal_extract "art" 20480 12064
                ;;
        netgear,d7800 |\
        netgear,r7500v2 |\
        netgear,r7800)
                ath10kcal_extract "art" 20480 12064
                ;;
-       linksys,ea8500)
-               hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-               ath10kcal_extract "art" 20480 12064
-               ;;
-       zyxel,nbg6817)
-               ath10kcal_extract "0:ART" 20480 12064
+       tplink,c2600)
+               ath10kcal_extract "radio" 20480 12064
+#              ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
                ;;
        tplink,vr2600v)
                ath10kcal_extract "ART" 20480 12064
                ;;
+       zyxel,nbg6817)
+               ath10kcal_extract "0:ART" 20480 12064
+               ;;
        esac
        ;;
 *)
index 2077110..7e31c38 100644 (file)
@@ -12,23 +12,23 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
-       tplink,c2600)
-               echo $(macaddr_add $(mtd_get_mac_binary default-mac 8)  $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
+       linksys,ea8500)
+               echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
                ;;
        netgear,d7800 |\
        netgear,r7500v2 |\
        netgear,r7800)
                echo $(macaddr_add $(mtd_get_mac_binary art 6)  $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
                ;;
-       linksys,ea8500)
-               echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
-               ;;
-       zyxel,nbg6817)
-               echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress
+       tplink,c2600)
+               echo $(macaddr_add $(mtd_get_mac_binary default-mac 8)  $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
                ;;
        tplink,vr2600v)
                echo $(macaddr_add $(mtd_get_mac_binary default-mac 0)  $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
                ;;
+       zyxel,nbg6817)
+               echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress
+               ;;
        *)
                ;;
 esac
index dc88c9e..f71ee37 100644 (file)
@@ -10,6 +10,9 @@ platform_check_image() {
 
 platform_do_upgrade() {
        case "$(board_name)" in
+       linksys,ea8500)
+               platform_do_upgrade_linksys "$ARGV"
+               ;;
        netgear,d7800 |\
        netgear,r7500 |\
        netgear,r7500v2 |\
@@ -24,9 +27,6 @@ platform_do_upgrade() {
                MTD_CONFIG_ARGS="-s 0x200000"
                default_do_upgrade "$ARGV"
                ;;
-       linksys,ea8500)
-               platform_do_upgrade_linksys "$ARGV"
-               ;;
        tplink,vr2600v)
                PART_NAME="kernel:rootfs"
                MTD_CONFIG_ARGS="-s 0x200000"
index f28f4a3..e8182e8 100644 (file)
@@ -98,70 +98,20 @@ define Device/ZyXELImage
        IMAGE/mmcblk0p4-kernel.bin := append-kernel
 endef
 
-define Device/qcom_ipq8064-ap148
-       $(call Device/FitImage)
-       $(call Device/UbiFit)
-       DEVICE_DTS := qcom-ipq8064-ap148
-       KERNEL_INSTALL := 1
-       BLOCKSIZE := 128k
-       PAGESIZE := 2048
-       BOARD_NAME := ap148
-       SUPPORTED_DEVICES += ap148
-       DEVICE_TITLE := Qualcomm AP148
-       DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148
-
-define Device/qcom_ipq8064-ap148-legacy
-       $(call Device/LegacyImage)
-       $(call Device/UbiFit)
-       DEVICE_DTS := qcom-ipq8064-ap148
-       BLOCKSIZE := 128k
-       PAGESIZE := 2048
-       BOARD_NAME := ap148
-       SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
-       DEVICE_TITLE := Qualcomm AP148 (legacy)
-       DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148-legacy
-
-define Device/tplink_c2600
-       $(call Device/TpSafeImage)
-       DEVICE_DTS := qcom-ipq8064-c2600
-       BLOCKSIZE := 128k
-       PAGESIZE := 2048
-       BOARD_NAME := c2600
-       SUPPORTED_DEVICES += c2600
-       TPLINK_BOARD_ID := C2600
-       DEVICE_TITLE := TP-Link Archer C2600
-       DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += tplink_c2600
-
-define Device/netgear_d7800
-       $(call Device/DniImage)
-       DEVICE_DTS := qcom-ipq8064-d7800
-       KERNEL_SIZE := 2097152
-       NETGEAR_BOARD_ID := D7800
-       NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
-       BLOCKSIZE := 128k
-       PAGESIZE := 2048
-       BOARD_NAME := d7800
-       SUPPORTED_DEVICES += d7800
-       DEVICE_TITLE := Netgear Nighthawk X4 D7800
-       DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += netgear_d7800
-
-define Device/qcom_ipq8064-db149
-       $(call Device/FitImage)
-       DEVICE_DTS := qcom-ipq8064-db149
-       KERNEL_INSTALL := 1
-       BOARD_NAME := db149
-       DEVICE_TITLE := Qualcomm DB149
-       DEVICE_PACKAGES := ath10k-firmware-qca99x0
+define Device/avm_fritzbox-4040
+       $(call Device/FitImageLzma)
+       DEVICE_DTS := qcom-ipq4019-fritz4040
+       KERNEL_LOADADDR := 0x80208000
+       BLOCKSIZE := 4k
+       PAGESIZE := 256
+       BOARD_NAME := fritz4040
+       DEVICE_TITLE := AVM Fritz!Box 4040
+       IMAGE_SIZE := 29753344
+       IMAGES = sysupgrade.bin
+       IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+       DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040
 endef
-TARGET_DEVICES += qcom_ipq8064-db149
+TARGET_DEVICES += avm_fritzbox-4040
 
 define Device/linksys_ea8500
        $(call Device/LegacyImage)
@@ -182,20 +132,20 @@ define Device/linksys_ea8500
 endef
 TARGET_DEVICES += linksys_ea8500
 
-define Device/avm_fritzbox-4040
-       $(call Device/FitImageLzma)
-       DEVICE_DTS := qcom-ipq4019-fritz4040
-       KERNEL_LOADADDR := 0x80208000
-       BLOCKSIZE := 4k
-       PAGESIZE := 256
-       BOARD_NAME := fritz4040
-       DEVICE_TITLE := AVM Fritz!Box 4040
-       IMAGE_SIZE := 29753344
-       IMAGES = sysupgrade.bin
-       IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-       DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040
+define Device/netgear_d7800
+       $(call Device/DniImage)
+       DEVICE_DTS := qcom-ipq8064-d7800
+       KERNEL_SIZE := 2097152
+       NETGEAR_BOARD_ID := D7800
+       NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
+       BLOCKSIZE := 128k
+       PAGESIZE := 2048
+       BOARD_NAME := d7800
+       SUPPORTED_DEVICES += d7800
+       DEVICE_TITLE := Netgear Nighthawk X4 D7800
+       DEVICE_PACKAGES := ath10k-firmware-qca99x0
 endef
-TARGET_DEVICES += avm_fritzbox-4040
+TARGET_DEVICES += netgear_d7800
 
 define Device/netgear_r7500
        $(call Device/DniImage)
@@ -242,37 +192,6 @@ define Device/netgear_r7800
 endef
 TARGET_DEVICES += netgear_r7800
 
-define Device/zyxel_nbg6817
-       DEVICE_DTS := qcom-ipq8065-nbg6817
-       KERNEL_SIZE := 4096k
-       BLOCKSIZE := 64k
-       BOARD_NAME := nbg6817
-       SUPPORTED_DEVICES += nbg6817
-       DEVICE_TITLE := ZyXEL NBG6817
-       DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
-       $(call Device/ZyXELImage)
-endef
-TARGET_DEVICES += zyxel_nbg6817
-
-define Device/tplink_vr2600v
-       PROFILES += $$(DEVICE_NAME)
-       FILESYSTEMS := squashfs
-       KERNEL_SUFFIX := -uImage
-       KERNEL = kernel-bin | append-dtb | uImage none
-       KERNEL_NAME := zImage
-       KERNEL_SIZE := 2097152
-       DEVICE_DTS := qcom-ipq8064-vr2600v
-       BLOCKSIZE := 128k
-       PAGESIZE := 2048
-       BOARD_NAME := vr2600v
-       SUPPORTED_DEVICES += vr2600v
-       DEVICE_TITLE := TP-Link Archer VR2600v
-       DEVICE_PACKAGES := ath10k-firmware-qca99x0
-       IMAGES := sysupgrade.bin
-       IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += tplink_vr2600v
-
 define Device/qcom_ap-dk01.1-c1
        PROFILES += $$(DEVICE_NAME)
        DEVICE_TITLE := QCA AP-DK01.1-C1
@@ -304,4 +223,85 @@ define Device/qcom_ap-dk04.1-c1
 endef
 TARGET_DEVICES += qcom_ap-dk04.1-c1
 
+define Device/qcom_ipq8064-ap148
+       $(call Device/FitImage)
+       $(call Device/UbiFit)
+       DEVICE_DTS := qcom-ipq8064-ap148
+       KERNEL_INSTALL := 1
+       BLOCKSIZE := 128k
+       PAGESIZE := 2048
+       BOARD_NAME := ap148
+       SUPPORTED_DEVICES += ap148
+       DEVICE_TITLE := Qualcomm AP148
+       DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148
+
+define Device/qcom_ipq8064-ap148-legacy
+       $(call Device/LegacyImage)
+       $(call Device/UbiFit)
+       DEVICE_DTS := qcom-ipq8064-ap148
+       BLOCKSIZE := 128k
+       PAGESIZE := 2048
+       BOARD_NAME := ap148
+       SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
+       DEVICE_TITLE := Qualcomm AP148 (legacy)
+       DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-ap148-legacy
+
+define Device/qcom_ipq8064-db149
+       $(call Device/FitImage)
+       DEVICE_DTS := qcom-ipq8064-db149
+       KERNEL_INSTALL := 1
+       BOARD_NAME := db149
+       DEVICE_TITLE := Qualcomm DB149
+       DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += qcom_ipq8064-db149
+
+define Device/tplink_c2600
+       $(call Device/TpSafeImage)
+       DEVICE_DTS := qcom-ipq8064-c2600
+       BLOCKSIZE := 128k
+       PAGESIZE := 2048
+       BOARD_NAME := c2600
+       SUPPORTED_DEVICES += c2600
+       TPLINK_BOARD_ID := C2600
+       DEVICE_TITLE := TP-Link Archer C2600
+       DEVICE_PACKAGES := ath10k-firmware-qca99x0
+endef
+TARGET_DEVICES += tplink_c2600
+
+define Device/tplink_vr2600v
+       PROFILES += $$(DEVICE_NAME)
+       FILESYSTEMS := squashfs
+       KERNEL_SUFFIX := -uImage
+       KERNEL = kernel-bin | append-dtb | uImage none
+       KERNEL_NAME := zImage
+       KERNEL_SIZE := 2097152
+       DEVICE_DTS := qcom-ipq8064-vr2600v
+       BLOCKSIZE := 128k
+       PAGESIZE := 2048
+       BOARD_NAME := vr2600v
+       SUPPORTED_DEVICES += vr2600v
+       DEVICE_TITLE := TP-Link Archer VR2600v
+       DEVICE_PACKAGES := ath10k-firmware-qca99x0
+       IMAGES := sysupgrade.bin
+       IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += tplink_vr2600v
+
+define Device/zyxel_nbg6817
+       DEVICE_DTS := qcom-ipq8065-nbg6817
+       KERNEL_SIZE := 4096k
+       BLOCKSIZE := 64k
+       BOARD_NAME := nbg6817
+       SUPPORTED_DEVICES += nbg6817
+       DEVICE_TITLE := ZyXEL NBG6817
+       DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
+       $(call Device/ZyXELImage)
+endef
+TARGET_DEVICES += zyxel_nbg6817
+
 $(eval $(call BuildImage))