ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND...

The initialization routines for these boards were relying on some (wrong)
defaults for the QCA953x ethernet. Make these defaults explicit to prevent
breaking them when the QCA953x defaults are fixed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46206

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c
index c28afc6cebfaf1ab92e4463b49da8bdef9dc79fc..3e5c2a2522b5d08b8a1112e2df43655daae37609 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c
@@ -109,12 +109,18 @@ static void __init tl_ap143_setup(void)
        ath79_register_mdio(0, 0x0);
 
        /* LAN */
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+       ath79_eth1_data.duplex = DUPLEX_FULL;
+       ath79_switch_data.phy_poll_mask |= BIT(4);
        ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
        ath79_register_eth(1);
 
        /* WAN */
        ath79_switch_data.phy4_mii_en = 1;
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ath79_eth0_data.duplex = DUPLEX_FULL;
+       ath79_eth0_data.speed = SPEED_100;
+       ath79_eth0_data.phy_mask = BIT(4);
        ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
        ath79_register_eth(0);
 

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
index bc13d7019f0fa896977f4340de55f6b40cd7c9c7..e665a2e993665e4077d3aa0a25a520bfb2795103 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
@@ -105,12 +105,19 @@ static void __init common_setup(void)
        ath79_register_mdio(0, 0x0);
 
        /* LAN */
+       ath79_eth0_data.duplex = DUPLEX_FULL;
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ath79_eth0_data.speed = SPEED_100;
+       ath79_eth0_data.phy_mask = BIT(4);
        ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
        ath79_register_eth(0);
 
        /* WAN */
        ath79_switch_data.phy4_mii_en = 1;
+       ath79_eth1_data.duplex = DUPLEX_FULL;
        ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ath79_eth1_data.speed = SPEED_100;
+       ath79_switch_data.phy_poll_mask |= BIT(4);
        ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
        ath79_register_eth(1);