ar71xx: Add support for Ubiquiti UniFi AP AC PRO
authorP.Wassi <p.wassi at gmx.at>
Wed, 11 May 2016 07:40:00 +0000 (09:40 +0200)
committerJohn Crispin <john@phrozen.org>
Thu, 12 May 2016 01:29:36 +0000 (03:29 +0200)
Add support for the Ubiquiti UniFi AP AC PRO
Signed-off-by: P.Wassi <p.wassi at gmx.at>
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/generic/profiles/ubnt.mk
target/linux/ar71xx/image/Makefile

index 4cf7434..449af63 100755 (executable)
@@ -418,6 +418,11 @@ wpj344)
                "0@eth0" "3:lan" "2:wan"
        ;;
 
+unifiac-pro)
+       ucidef_add_switch "switch0" \
+               "0@eth0" "2:lan" "3:wan"
+       ;;
+
 wpj531)
        ucidef_set_interfaces_lan_wan "eth0" "eth1"
        ;;
index 71f5ebc..3b5e299 100644 (file)
@@ -355,7 +355,8 @@ get_status_led() {
                status_led="ubnt:green:dome"
                ;;
        uap-pro | \
-       unifiac-lite)
+       unifiac-lite | \
+       unifiac-pro)
                status_led="ubnt:white:dome"
                ;;
        unifi-outdoor-plus)
index 3490129..d925a85 100644 (file)
@@ -76,7 +76,8 @@ case "$FIRMWARE" in
                ath10kcal_extract "ART" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
                ;;
-       unifiac-lite)
+       unifiac-lite | \
+       unifiac-pro)
                ath10kcal_extract "EEPROM" 20480 2116
                ;;
        esac
index d05ef54..6c2b51a 100755 (executable)
@@ -952,6 +952,9 @@ ar71xx_board_detect() {
        *"UniFi-AC-LITE")
                name="unifiac-lite"
                ;;
+       *"UniFi-AC-PRO")
+               name="unifiac-pro"
+               ;;
        *"UniFi AP Pro")
                name="uap-pro"
                ;;
index 18d9237..9b771b7 100755 (executable)
@@ -269,6 +269,7 @@ platform_check_image() {
        nbg460n_550n_550nh | \
        unifi | \
        unifiac-lite | \
+       unifiac-pro | \
        unifi-outdoor | \
        carambola2 | \
        weio )
index 622d9a7..79d2d9d 100644 (file)
@@ -1442,7 +1442,7 @@ config ATH79_MACH_UBNT
        select ATH79_DEV_USB
 
 config ATH79_MACH_UBNT_UNIFIAC
-       bool "Ubiquiti UniFi AC (LITE/LR) support"
+       bool "Ubiquiti UniFi AC (LITE/LR/PRO) support"
        select SOC_QCA956X
        select ATH79_DEV_AP9X_PCI if PCI
        select ATH79_DEV_ETH
@@ -1450,6 +1450,7 @@ config ATH79_MACH_UBNT_UNIFIAC
        select ATH79_DEV_LEDS_GPIO
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
+       select ATH79_DEV_USB
 
 config ATH79_MACH_WEIO
        bool "WeIO board"
index 31cbe30..9194bc1 100644 (file)
@@ -21,6 +21,7 @@
 #include <asm/mach-ath79/ar71xx_regs.h>
 
 #include <linux/platform_data/phy-at803x.h>
+#include <linux/ar8216_platform.h>
 
 #include "common.h"
 #include "dev-ap9x-pci.h"
@@ -29,6 +30,7 @@
 #include "dev-leds-gpio.h"
 #include "dev-m25p80.h"
 #include "dev-wmac.h"
+#include "dev-usb.h"
 #include "machtypes.h"
 
 
@@ -108,3 +110,70 @@ static void __init ubnt_unifiac_lite_setup(void)
 
 MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_LITE, "UBNT-UF-AC-LITE", "Ubiquiti UniFi-AC-LITE",
             ubnt_unifiac_lite_setup);
+
+static struct ar8327_pad_cfg ubnt_unifiac_pro_ar8327_pad0_cfg = {
+       .mode = AR8327_PAD_MAC_SGMII,
+       .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data ubnt_unifiac_pro_ar8327_data = {
+       .pad0_cfg = &ubnt_unifiac_pro_ar8327_pad0_cfg,
+       .port0_cfg = {
+               .force_link = 1,
+               .speed = AR8327_PORT_SPEED_1000,
+               .duplex = 1,
+               .txpause = 1,
+               .rxpause = 1,
+       },
+};
+
+
+static struct mdio_board_info ubnt_unifiac_pro_mdio0_info[] = {
+       {
+               .bus_id = "ag71xx-mdio.0",
+               .phy_addr = 0,
+               .platform_data = &ubnt_unifiac_pro_ar8327_data,
+       },
+};
+
+static void __init ubnt_unifiac_pro_setup(void)
+{
+       u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       ath79_register_m25p80(&ubnt_unifiac_flash_data);
+
+
+       ath79_init_mac(ath79_eth0_data.mac_addr,
+                      eeprom + UNIFIAC_MAC0_OFFSET, 0);
+
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+       ath79_eth0_data.phy_mask = BIT(0);
+
+       mdiobus_register_board_info(ubnt_unifiac_pro_mdio0_info,
+                                   ARRAY_SIZE(ubnt_unifiac_pro_mdio0_info));
+
+       ath79_register_mdio(0, 0x00);
+       ath79_register_eth(0);
+
+
+       ath79_register_usb();
+
+
+       ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
+
+
+       ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
+
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
+                                ubnt_unifiac_leds_gpio);
+
+       ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ubnt_unifiac_gpio_keys),
+                                       ubnt_unifiac_gpio_keys);
+}
+
+
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_PRO, "UBNT-UF-AC-PRO", "Ubiquiti UniFi-AC-PRO",
+            ubnt_unifiac_pro_setup);
index d83045c..7b4f67f 100644 (file)
@@ -220,6 +220,7 @@ enum ath79_mach_type {
        ATH79_MACH_UBNT_UAP_PRO,        /* Ubiquiti UniFi AP Pro */
        ATH79_MACH_UBNT_UNIFI,          /* Ubiquiti Unifi */
        ATH79_MACH_UBNT_UNIFIAC_LITE,   /* Ubiquiti Unifi AC LITE/LR */
+       ATH79_MACH_UBNT_UNIFIAC_PRO,    /* Ubiquiti Unifi AC PRO */
        ATH79_MACH_UBNT_UNIFI_OUTDOOR,  /* Ubiquiti UnifiAP Outdoor */
        ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
        ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
index eac0240..69b8398 100644 (file)
@@ -49,6 +49,17 @@ endef
 
 $(eval $(call Profile,UBNTUNIFIACLITE))
 
+define Profile/UBNTUNIFIACPRO
+       NAME:=Ubiquiti UniFi AP AC PRO
+       PACKAGES:=kmod-ath10k ath10k-firmware-qca988x kmod-usb-core kmod-usb-ohci kmod-usb2
+endef
+
+define Profile/UBNTUNIFIACPRO/Description
+       Package set optimized for the Ubiquiti UniFi AP AC PRO.
+endef
+
+$(eval $(call Profile,UBNTUNIFIACPRO))
+
 define Profile/UBNTUNIFIOUTDOOR
        NAME:=Ubiquiti UniFiAP Outdoor
        PACKAGES:=
index dba2667..4a9378c 100644 (file)
@@ -1241,12 +1241,18 @@ define Device/ubnt-unifiac-lite
   BOARDNAME := UBNT-UF-AC-LITE
 endef
 
+define Device/ubnt-unifiac-pro
+  $(Device/ubnt-unifiac)
+  DEVICE_PROFILE := UBNT UBNTUNIFIACPRO
+  BOARDNAME := UBNT-UF-AC-PRO
+endef
+
 define Device/ubnt-unifi-outdoor
   $(Device/ubnt-bz)
   BOARDNAME := UBNT-U20
   DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
 endef
-TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifi-outdoor
+TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-pro ubnt-unifi-outdoor
 
 define Device/ubnt-nano-m-xw
   $(Device/ubnt-xw)