ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage

r22700 contained a copy-and-paste error that set eth0's MAC address
twice and never set eth1's.

Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 24036

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
index 5ecc47390c9bca64d226bfb3caa98aaa10f32c36..3d3114689b48aa71e0e90ef4f358c10b4184980b 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c
@@ -156,7 +156,7 @@ static void __init dir825b1_setup(void)
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
        ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
 
-       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 2);
+       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2);
        ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth1_data.phy_mask = 0x10;