uboot-envtools: Add support for IPQ806x AP148 and DB149
authorRam Chandra Jangir <rjangir@codeaurora.org>
Wed, 28 Jun 2017 17:54:45 +0000 (23:24 +0530)
committerJohn Crispin <john@phrozen.org>
Wed, 30 Aug 2017 16:12:48 +0000 (18:12 +0200)
IPQ806x AP148 and DB149 boards didn't have the UCI ubootenv
section initialized, so the usage of fw_printenv required manual
configuration. With this change, the "fw_printenv" and "fw_setenv"
command will automatically work on NOR and NAND based platforms.

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
package/boot/uboot-envtools/files/ipq

index 5d0a477..b716280 100644 (file)
@@ -12,7 +12,28 @@ touch /etc/config/ubootenv
 
 board=$(board_name)
 
+ubootenv_mtdinfo () {
+       UBOOTENV_PART=$(cat /proc/mtd | grep APPSBLENV)
+       mtd_dev=$(echo $UBOOTENV_PART | awk '{print $1}' | sed 's/:$//')
+       mtd_size=$(echo $UBOOTENV_PART | awk '{print "0x"$2}')
+       mtd_erase=$(echo $UBOOTENV_PART | awk '{print "0x"$3}')
+       nor_flash=$(find /sys/bus/spi/devices/*/mtd -name ${mtd_dev})
+
+       if [ -n "$nor_flash" ]; then
+               ubootenv_size=$mtd_size
+       else
+               # size is fixed to 0x40000 in u-boot
+               ubootenv_size=0x40000
+       fi
+
+       sectors=$(( $ubootenv_size / $mtd_erase ))
+       echo /dev/$mtd_dev 0x0 $ubootenv_size $mtd_erase $sectors
+}
+
 case "$board" in
+ap148 | db149)
+       ubootenv_add_uci_config $(ubootenv_mtdinfo)
+       ;;
 ea8500)
        ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x20000" "0x20000"
        ;;