ramips: Archer C50 cleanup
authorHenryk Heisig <hyniu@o2.pl>
Thu, 13 Oct 2016 19:00:06 +0000 (21:00 +0200)
committerJohn Crispin <john@phrozen.org>
Mon, 31 Oct 2016 15:58:41 +0000 (16:58 +0100)
- setting read-only flag to important partitions
- enabling PA to improve 2.4 GHz signal strength
- add missing leds
- rename colour led
- add mac adress to 5GHz wlan interface
- included <dt-bindings/input/input.h> and <dt-bindings/gpio/gpio.h>

Signed-off-by: Henryk Heisig hyniu@o2.pl
target/linux/ramips/base-files/etc/board.d/01_leds
target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/dts/ArcherC50.dts

index d1c83d7..27e15ca 100755 (executable)
@@ -88,11 +88,12 @@ c20i)
        ucidef_set_led_wlan "wlan" "wlan" "$board:blue:wlan" "phy0radio"
        ;;
 c50)
-       ucidef_set_led_default "power" "power" "$board:blue:power" "0"
-       ucidef_set_led_netdev "lan" "lan" "$board:blue:lan" "eth0.2"
-       set_usb_led "$board:blue:usb"
-       ucidef_set_led_wlan "wlan2g" "wlan2g" "$board:blue:wlan2g" "phy1radio"
-       ucidef_set_led_wlan "wlan5g" "wlan5g" "$board:blue:wlan5g" "phy0radio"
+       ucidef_set_led_default "power" "power" "$board:green:power" "0"
+       ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01"
+       set_usb_led "$board:green:usb"
+       ucidef_set_led_netdev "wlan2g" "wlan2g" "$board:green:wlan2g" wlan1
+       set_wifi_led "$board:green:wlan5g"
        ;;
 cf-wr800n)
        ucidef_set_led_netdev "lan" "lan" "$board:white:ethernet" eth0.1
index b6d845f..ff8f4c5 100644 (file)
@@ -19,6 +19,7 @@ get_status_led() {
        asl26555|\
        br-6425|\
        br-6475nd|\
+       c50|\
        dch-m225|\
        dir-860l-b1|\
        e1700|\
@@ -91,9 +92,6 @@ get_status_led() {
        wrh-300cr)
                status_led="$board:green:wps"
                ;;
-       c50)
-               status_led="tp-link:blue:power"
-               ;;
        cf-wr800n|\
        psg1208)
                status_led="$board:white:wps"
index 44753ef..3924cc4 100644 (file)
@@ -1,4 +1,6 @@
 /dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 #include "mt7620a.dtsi"
 
                compatible = "gpio-leds";
 
                lan {
-                       label = "c50:blue:lan";
-                       gpios = <&gpio0 1 1>;
+                       label = "c50:green:lan";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                };
 
                power {
-                       label = "c50:blue:power";
-                       gpios = <&gpio0 7 0>;
+                       label = "c50:green:power";
+                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
                };
 
                usb {
-                       label = "c50:blue:usb";
-                       gpios = <&gpio0 9 1>;
+                       label = "c50:green:usb";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "c50:green:wan";
+                       gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+               };
+
+               wan_orange {
+                       label = "c50:orange:wan";
+                       gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
 
                wlan5g {
-                       label = "c50:blue:wlan5g";
-                       gpios = <&gpio0 11 1>;
+                       label = "c50:green:wlan5g";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                wlan2g {
-                       label = "c50:blue:wlan2g";
-                       gpios = <&gpio3 0 1>;
+                       label = "c50:green:wlan2g";
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+               };
+
+               wps {
+                       label = "c50:green:wps";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
        };
 
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 13 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                rfkill {
                        label = "rfkill";
-                       gpios = <&gpio0 2 1>;
-                       linux,code = <0xf7>;
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
                };      };
 };
 
+&gpio1 {
+       status = "okay";
+};
+
 &gpio2 {
        status = "okay";
 };
                partition@7c0000 {
                        label = "config";
                        reg = <0x7c0000 0x10000>;
+                       read-only;
                };
 
                rom: partition@7d0000 {
                        label = "rom";
                        reg = <0x7d0000 0x10000>;
+                       read-only;
                };
 
                partition@7e0000 {
                        label = "romfile";
                        reg = <0x7e0000 0x10000>;
+                       read-only;
                };
 
                radio: partition@7f0000 {
                        label = "radio";
                        reg = <0x7f0000 0x10000>;
+                       read-only;
                };
        };
 };
 &pinctrl {
        state_default: pinctrl0 {
                gpio {
-                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
                        ralink,function = "gpio";
                };
+
+               pa {
+                       ralink,group = "pa";
+                       ralink,function = "pa";
+               };
        };
 };
 
 &ethernet {
                pinctrl-names = "default";
-               pinctrl-0 = <&ephy_pins>;
                mtd-mac-address = <&rom 0xf100>;
                mediatek,portmap = "wllll";
        };
                        device_type = "pci";
                        mediatek,mtd-eeprom = <&radio 32768>;
                        mediatek,2ghz = <0>;
+                       mtd-mac-address = <&rom 0xf100>;
+                       mtd-mac-address-increment = <(-1)>;
                };
        };
 };