+From 9a01d7f21bd33725dc33325a437c3cc4185ee8bd Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel@makrotopia.org>
+Date: Wed, 18 Apr 2018 19:24:31 +0200
+Subject: [PATCH 16/16] mesh: make forwarding configurable
+
+Allow mesh_fwding to be specified in a mesh bss config, pass that
+to the driver (only nl80211 implemented for now) and announce
+forwarding capability accordingly.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ src/ap/ap_config.h | 2 ++
+ src/drivers/driver.h | 2 ++
+ src/drivers/driver_nl80211.c | 3 +++
+ wpa_supplicant/config.c | 4 ++++
+ wpa_supplicant/config.h | 9 +++++++++
+ wpa_supplicant/config_file.c | 4 ++++
+ wpa_supplicant/config_ssid.h | 5 +++++
+ wpa_supplicant/mesh.c | 6 ++++++
+ wpa_supplicant/mesh_mpm.c | 4 ++--
+ wpa_supplicant/wpa_supplicant.conf | 3 +++
+ 10 files changed, 40 insertions(+), 2 deletions(-)
+
+--- a/src/ap/ap_config.h
++++ b/src/ap/ap_config.h
+@@ -49,6 +49,7 @@ struct mesh_conf {
+ int dot11MeshRetryTimeout; /* msec */
+ int dot11MeshConfirmTimeout; /* msec */
+ int dot11MeshHoldingTimeout; /* msec */
++ int mesh_fwding;
+ };
+
+ #define MAX_STA_COUNT 2007
+@@ -624,6 +625,7 @@ struct hostapd_bss_config {
+
+ #define MESH_ENABLED BIT(0)
+ int mesh;
++ int mesh_fwding;
+
+ u8 radio_measurements[RRM_CAPABILITIES_IE_LEN];
+
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -1363,6 +1363,7 @@ struct wpa_driver_mesh_bss_params {
+ #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS 0x00000004
+ #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE 0x00000008
+ #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD 0x00000010
++#define WPA_DRIVER_MESH_CONF_FLAG_FORWARDING 0x00000020
+ /*
+ * TODO: Other mesh configuration parameters would go here.
+ * See NL80211_MESHCONF_* for all the mesh config parameters.
+@@ -1372,6 +1373,7 @@ struct wpa_driver_mesh_bss_params {
+ int peer_link_timeout;
+ int max_peer_links;
+ int rssi_threshold;
++ int forwarding;
+ u16 ht_opmode;
+ };
+
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -9230,6 +9230,9 @@ static int nl80211_put_mesh_config(struc
+ if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
+ nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+ params->auto_plinks)) ||
++ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_FORWARDING) &&
++ nla_put_u8(msg, NL80211_MESHCONF_FORWARDING,
++ params->forwarding)) ||
+ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) &&
+ nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
+ params->max_peer_links)) ||
+--- a/wpa_supplicant/config.c
++++ b/wpa_supplicant/config.c
+@@ -2212,6 +2212,7 @@ static const struct parse_data ssid_fiel
+ #ifdef CONFIG_MESH
+ { INT_RANGE(mode, 0, 5) },
+ { INT_RANGE(no_auto_peer, 0, 1) },
++ { INT_RANGE(mesh_fwding, 0, 1) },
+ { INT_RANGE(mesh_rssi_threshold, -255, 1) },
+ #else /* CONFIG_MESH */
+ { INT_RANGE(mode, 0, 4) },
+@@ -2763,6 +2764,7 @@ void wpa_config_set_network_defaults(str
+ ssid->dot11MeshRetryTimeout = DEFAULT_MESH_RETRY_TIMEOUT;
+ ssid->dot11MeshConfirmTimeout = DEFAULT_MESH_CONFIRM_TIMEOUT;
+ ssid->dot11MeshHoldingTimeout = DEFAULT_MESH_HOLDING_TIMEOUT;
++ ssid->mesh_fwding = DEFAULT_MESH_FWDING;
+ ssid->mesh_rssi_threshold = DEFAULT_MESH_RSSI_THRESHOLD;
+ #endif /* CONFIG_MESH */
+ #ifdef CONFIG_HT_OVERRIDES
+@@ -3978,6 +3980,7 @@ struct wpa_config * wpa_config_alloc_emp
+ config->user_mpm = DEFAULT_USER_MPM;
+ config->max_peer_links = DEFAULT_MAX_PEER_LINKS;
+ config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY;
++ config->mesh_fwding = DEFAULT_MESH_FWDING;
+ config->dot11RSNASAERetransPeriod =
+ DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD;
+ config->fast_reauth = DEFAULT_FAST_REAUTH;
+@@ -4600,6 +4603,7 @@ static const struct global_parse_data gl
+ { INT(user_mpm), 0 },
+ { INT_RANGE(max_peer_links, 0, 255), 0 },
+ { INT(mesh_max_inactivity), 0 },
++ { INT_RANGE(mesh_fwding, 0, 1), 0 },
+ { INT(dot11RSNASAERetransPeriod), 0 },
+ #endif /* CONFIG_MESH */
+ { INT(disable_scan_offload), 0 },
+--- a/wpa_supplicant/config.h
++++ b/wpa_supplicant/config.h
+@@ -18,6 +18,7 @@
+ #define DEFAULT_USER_MPM 1
+ #define DEFAULT_MAX_PEER_LINKS 99
+ #define DEFAULT_MESH_MAX_INACTIVITY 300
++#define DEFAULT_MESH_FWDING 1
+ /*
+ * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
+ * but use 1000 ms in practice to avoid issues on low power CPUs.
+@@ -1306,6 +1307,14 @@ struct wpa_config {
+ int mesh_max_inactivity;
+
+ /**
++ * mesh_fwding - Mesh network layer-2 forwarding
++ *
++ * This controls whether to enable layer-2 forwarding.
++ * By default: 1: enabled
++ */
++ int mesh_fwding;
++
++ /**
+ * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame
+ *
+ * This timeout value is used in mesh STA to retransmit
+--- a/wpa_supplicant/config_file.c
++++ b/wpa_supplicant/config_file.c
+@@ -818,6 +818,7 @@ static void wpa_config_write_network(FIL
+ #endif /* IEEE8021X_EAPOL */
+ INT(mode);
+ INT(no_auto_peer);
++ INT(mesh_fwding);
+ INT(frequency);
+ INT(fixed_freq);
+ #ifdef CONFIG_ACS
+@@ -1450,6 +1451,9 @@ static void wpa_config_write_global(FILE
+ fprintf(f, "mesh_max_inactivity=%d\n",
+ config->mesh_max_inactivity);
+
++ if (config->mesh_fwding != DEFAULT_MESH_FWDING)
++ fprintf(f, "mesh_fwding=%d\n", config->mesh_fwding);
++
+ if (config->dot11RSNASAERetransPeriod !=
+ DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD)
+ fprintf(f, "dot11RSNASAERetransPeriod=%d\n",
+--- a/wpa_supplicant/config_ssid.h
++++ b/wpa_supplicant/config_ssid.h
+@@ -500,6 +500,11 @@ struct wpa_ssid {
+ int dot11MeshConfirmTimeout; /* msec */
+ int dot11MeshHoldingTimeout; /* msec */
+
++ /**
++ * Mesh network layer-2 forwarding
++ */
++ int mesh_fwding;
++
+ int ht;
+ int ht40;
+
+--- a/wpa_supplicant/mesh.c
++++ b/wpa_supplicant/mesh.c
+@@ -120,6 +120,7 @@ static struct mesh_conf * mesh_config_cr
+ conf->mesh_cc_id = 0;
+ conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
+ conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
++ conf->mesh_fwding = ssid->mesh_fwding;
+ conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
+ conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
+ conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
+@@ -255,6 +256,7 @@ static int wpa_supplicant_mesh_init(stru
+ bss->conf->start_disabled = 1;
+ bss->conf->mesh = MESH_ENABLED;
+ bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
++ bss->conf->mesh_fwding = wpa_s->conf->mesh_fwding;
+
+ if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes,
+ wpa_s->hw.num_modes) && wpa_s->conf->country[0]) {
+@@ -508,6 +510,10 @@ int wpa_supplicant_join_mesh(struct wpa_
+ }
+ params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
+
++ /* always explicitely set forwarding to on or off for now */
++ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING;
++ params->conf.forwarding = ssid->mesh_fwding;
++
+ wpa_s->mesh_params = params;
+ if (wpa_supplicant_mesh_init(wpa_s, ssid, ¶ms->freq)) {
+ wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
+--- a/wpa_supplicant/mesh_mpm.c
++++ b/wpa_supplicant/mesh_mpm.c
+@@ -288,9 +288,9 @@ static void mesh_mpm_send_plink_action(s
+ info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1;
+ /* TODO: Add Connected to Mesh Gate/AS subfields */
+ wpabuf_put_u8(buf, info);
+- /* always forwarding & accepting plinks for now */
++ /* set forwarding & always accepting plinks for now */
+ wpabuf_put_u8(buf, MESH_CAP_ACCEPT_ADDITIONAL_PEER |
+- MESH_CAP_FORWARDING);
++ (conf->mesh_fwding ? MESH_CAP_FORWARDING : 0));
+ } else { /* Peer closing frame */
+ /* IE: Mesh ID */
+ wpabuf_put_u8(buf, WLAN_EID_MESH_ID);
+--- a/wpa_supplicant/wpa_supplicant.conf
++++ b/wpa_supplicant/wpa_supplicant.conf
+@@ -153,6 +153,9 @@ ap_scan=1
+ # This timeout value is used in mesh STA to clean up inactive stations.
+ #mesh_max_inactivity=300
+
++# Enable 802.11s layer-2 routing and forwarding
++#mesh_fwding=1
++
+ # cert_in_cb - Whether to include a peer certificate dump in events
+ # This controls whether peer certificates for authentication server and
+ # its certificate chain are included in EAP peer certificate events. This is
projects / openwrt / openwrt.git / commitdiff