build: move mkits.sh script to more common place
authorLuka Perkov <luka@openwrt.org>
Wed, 16 Oct 2013 10:29:50 +0000 (10:29 +0000)
committerLuka Perkov <luka@openwrt.org>
Wed, 16 Oct 2013 10:29:50 +0000 (10:29 +0000)
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38430

include/image.mk
scripts/mkits.sh [new file with mode: 0755]
target/linux/imx6/files-3.10/scripts/mkits.sh [deleted file]
target/linux/imx6/image/Makefile

index 8f895a3435cf4ff42460412ffd70700cdf5cfc50..729929f9da1ca91bc5a997af813d8c680ee7e9f6 100644 (file)
@@ -87,6 +87,13 @@ define Image/BuildKernel/MkuImageARM
                -n 'ARM OpenWrt Linux-$(LINUX_VERSION)' -d $(2) $(3)
 endef
 
+define Image/BuildKernel/MkFIT
+       $(TOPDIR)/scripts/mkits.sh \
+               -D $(1) -o $(KDIR)/fit-$(1).its -k $(2) -d $(3) -C $(4) -a $(5) -e $(6) \
+               -A $(ARCH) -v $(LINUX_VERSION)
+       PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $(KDIR)/fit-$(1).its $(KDIR)/fit-$(1)$(7).itb
+endef
+
 define Image/mkfs/jffs2/sub
                # FIXME: removing this line will cause strange behaviour in the foreach loop below
                $(STAGING_DIR_HOST)/bin/mkfs.jffs2 $(3) --pad -e $(patsubst %k,%KiB,$(1)) -o $(KDIR)/root.jffs2-$(2) -d $(TARGET_DIR) -v 2>&1 1>/dev/null | awk '/^.+$$$$/'
diff --git a/scripts/mkits.sh b/scripts/mkits.sh
new file mode 100755 (executable)
index 0000000..c360c73
--- /dev/null
@@ -0,0 +1,115 @@
+#!/bin/bash
+#
+# Licensed under the terms of the GNU GPL License version 2 or later.
+#
+# Author: Peter Tyser <ptyser@xes-inc.com>
+#
+# U-Boot firmware supports the booting of images in the Flattened Image
+# Tree (FIT) format.  The FIT format uses a device tree structure to
+# describe a kernel image, device tree blob, ramdisk, etc.  This script
+# creates an Image Tree Source (.its file) which can be passed to the
+# 'mkimage' utility to generate an Image Tree Blob (.itb file).  The .itb
+# file can then be booted by U-Boot (or other bootloaders which support
+# FIT images).  See doc/uImage.FIT/howto.txt in U-Boot source code for
+# additional information on FIT images.
+#
+
+usage() {
+       echo "Usage: `basename $0` -A arch -C comp -a addr -e entry" \
+               "-v version -k kernel [-D name -d dtb] -o its_file"
+       echo -e "\t-A ==> set architecture to 'arch'"
+       echo -e "\t-C ==> set compression type 'comp'"
+       echo -e "\t-a ==> set load address to 'addr' (hex)"
+       echo -e "\t-e ==> set entry point to 'entry' (hex)"
+       echo -e "\t-v ==> set kernel version to 'version'"
+       echo -e "\t-k ==> include kernel image 'kernel'"
+       echo -e "\t-D ==> human friendly Device Tree Blob 'name'"
+       echo -e "\t-d ==> include Device Tree Blob 'dtb'"
+       echo -e "\t-o ==> create output file 'its_file'"
+       exit 1
+}
+
+while getopts ":A:a:C:D:d:e:k:o:v:" OPTION
+do
+       case $OPTION in
+               A ) ARCH=$OPTARG;;
+               a ) LOAD_ADDR=$OPTARG;;
+               C ) COMPRESS=$OPTARG;;
+               D ) DEVICE=$OPTARG;;
+               d ) DTB=$OPTARG;;
+               e ) ENTRY_ADDR=$OPTARG;;
+               k ) KERNEL=$OPTARG;;
+               o ) OUTPUT=$OPTARG;;
+               v ) VERSION=$OPTARG;;
+               * ) echo "Invalid option passed to '$0' (options:$@)"
+               usage;;
+       esac
+done
+
+# Make sure user entered all required parameters
+if [ -z "${ARCH}" ] || [ -z "${COMPRESS}" ] || [ -z "${LOAD_ADDR}" ] || \
+       [ -z "${ENTRY_ADDR}" ] || [ -z "${VERSION}" ] || [ -z "${KERNEL}" ] || \
+       [ -z "${OUTPUT}" ]; then
+       usage
+fi
+
+ARCH_UPPER=`echo $ARCH | tr '[:lower:]' '[:upper:]'`
+
+# Create a default, fully populated DTS file
+DATA="/dts-v1/;
+
+/ {
+       description = \"${ARCH_UPPER} OpenWrt FIT (Flattened Image Tree)\";
+       #address-cells = <1>;
+
+       images {
+               kernel@1 {
+                       description = \"${ARCH_UPPER} OpenWrt Linux-${VERSION}\";
+                       data = /incbin/(\"${KERNEL}\");
+                       type = \"kernel\";
+                       arch = \"${ARCH}\";
+                       os = \"linux\";
+                       compression = \"${COMPRESS}\";
+                       load = <${LOAD_ADDR}>;
+                       entry = <${ENTRY_ADDR}>;
+                       hash@1 {
+                               algo = \"crc32\";
+                       };
+                       hash@2 {
+                               algo = \"sha1\";
+                       };
+               };
+
+               fdt@1 {
+                       description = \"${ARCH_UPPER} OpenWrt ${DEVICE} device tree blob\";
+                       data = /incbin/(\"${DTB}\");
+                       type = \"flat_dt\";
+                       arch = \"${ARCH}\";
+                       compression = \"none\";
+                       hash@1 {
+                               algo = \"crc32\";
+                       };
+                       hash@2 {
+                               algo = \"sha1\";
+                       };
+               };
+       };
+
+       configurations {
+               default = \"config@1\";
+               config@1 {
+                       description = \"OpenWrt\";
+                       kernel = \"kernel@1\";
+                       fdt = \"fdt@1\";
+               };
+       };
+};"
+
+# Conditionally strip fdt information out of tree
+if [ -z "${DTB}" ]; then
+       DATA=`echo "$DATA" | sed '/start fdt/,/end fdt/d'`
+       DATA=`echo "$DATA" | sed '/fdt/d'`
+fi
+
+# Write .its file to disk
+echo "$DATA" > ${OUTPUT}
diff --git a/target/linux/imx6/files-3.10/scripts/mkits.sh b/target/linux/imx6/files-3.10/scripts/mkits.sh
deleted file mode 100644 (file)
index 3b02b69..0000000
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/bin/bash
-#
-# Licensed under the terms of the GNU GPL License version 2 or later.
-#
-# Author: Peter Tyser <ptyser@xes-inc.com>
-#
-# U-Boot firmware supports the booting of images in the Flattened Image
-# Tree (FIT) format.  The FIT format uses a device tree structure to
-# describe a kernel image, device tree blob, ramdisk, etc.  This script
-# creates an Image Tree Source (.its file) which can be passed to the
-# 'mkimage' utility to generate an Image Tree Blob (.itb file).  The .itb
-# file can then be booted by U-Boot (or other bootloaders which support
-# FIT images).  See doc/uImage.FIT/howto.txt in U-Boot source code for
-# additional information on FIT images.
-#
-
-usage() {
-       echo "Usage: `basename $0` -A arch -C comp -a addr -e entry" \
-               "-v version -k kernel [-d dtb] -o its_file"
-       echo -e "\t-A ==> set architecture to 'arch'"
-       echo -e "\t-C ==> set compression type 'comp'"
-       echo -e "\t-a ==> set load address to 'addr' (hex)"
-       echo -e "\t-e ==> set entry point to 'entry' (hex)"
-       echo -e "\t-v ==> set kernel version to 'version'"
-       echo -e "\t-k ==> include kernel image 'kernel'"
-       echo -e "\t-d ==> include Device Tree Blob 'dtb'"
-       echo -e "\t-o ==> create output file 'its_file'"
-       exit 1
-}
-
-while getopts ":A:C:a:d:e:k:o:v:" OPTION
-do
-       case $OPTION in
-               A ) ARCH=$OPTARG;;
-               C ) COMPRESS=$OPTARG;;
-               a ) LOAD_ADDR=$OPTARG;;
-               d ) DTB=$OPTARG;;
-               e ) ENTRY_ADDR=$OPTARG;;
-               k ) KERNEL=$OPTARG;;
-               o ) OUTPUT=$OPTARG;;
-               v ) VERSION=$OPTARG;;
-               * ) echo "Invalid option passed to '$0' (options:$@)"
-               usage;;
-       esac
-done
-
-# Make sure user entered all required parameters
-if [ -z "${ARCH}" ] || [ -z "${COMPRESS}" ] || [ -z "${LOAD_ADDR}" ] || \
-       [ -z "${ENTRY_ADDR}" ] || [ -z "${VERSION}" ] || [ -z "${KERNEL}" ] || \
-       [ -z "${OUTPUT}" ]; then
-       usage
-fi
-
-# Create a default, fully populated DTS file
-DATA="/dts-v1/;
-
-/ {
-       description = \"Linux kernel ${VERSION}\";
-       #address-cells = <1>;
-
-       images {
-               kernel@1 {
-                       description = \"Linux Kernel ${VERSION}\";
-                       data = /incbin/(\"${KERNEL}\");
-                       type = \"kernel\";
-                       arch = \"${ARCH}\";
-                       os = \"linux\";
-                       compression = \"${COMPRESS}\";
-                       load = <${LOAD_ADDR}>;
-                       entry = <${ENTRY_ADDR}>;
-                       hash@1 {
-                               algo = \"crc32\";
-                       };
-                       hash@2 {
-                               algo = \"sha1\";
-                       };
-               };
-
-               fdt@1 { /* start fdt */
-                       description = \"Flattened Device Tree blob\";
-                       data = /incbin/(\"${DTB}\");
-                       type = \"flat_dt\";
-                       arch = \"${ARCH}\";
-                       compression = \"none\";
-                       hash@1 {
-                               algo = \"crc32\";
-                       };
-                       hash@2 {
-                               algo = \"sha1\";
-                       };
-               }; /* end fdt */
-       };
-
-       configurations {
-               default = \"config@1\";
-               config@1 {
-                       description = \"Default Linux kernel\";
-                       kernel = \"kernel@1\";
-                       fdt = \"fdt@1\";
-               };
-       };
-};"
-
-# Conditionally strip fdt information out of tree
-if [ -z "${DTB}" ]; then
-       DATA=`echo "$DATA" | sed '/start fdt/,/end fdt/d'`
-       DATA=`echo "$DATA" | sed '/fdt/d'`
-fi
-
-# Write .its file to disk
-echo "$DATA" > ${OUTPUT}
index 0bcb85bee56ca3caf8769bdc0d3dff00a30fa446..aad15271a03b7e95a9e3f63f237d201d3c729e68 100644 (file)
@@ -11,22 +11,25 @@ BOARDS := \
        imx6dl-wandboard \
        imx6q-gw5400-a
 
-# board-specific Flattened Image Tree
-define mkfit
-       /bin/sh $(LINUX_DIR)/scripts/mkits.sh -A arm -C none -a $(2) -e $(2) \
-               -v 'OpenWrt Linux-$(LINUX_VERSION)' \
-               -d $(LINUX_DIR)/arch/arm/boot/dts/$(1).dtb -k $(LINUX_DIR)/arch/arm/boot/zImage \
-               -o $(KDIR)/$(1)-uImage.its
-       PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $(KDIR)/$(1)-uImage.its $(BIN_DIR)/openwrt-$(1)-uImage.itb
-endef
-
 # emit FIT images, DTB's and generic zImage
 define Image/BuildKernel
        $(foreach board,$(BOARDS),
-               $(call mkfit,$(board),0x10008000)
-               cp $(LINUX_DIR)/arch/arm/boot/dts/$(board).dtb $(BIN_DIR)
+               cp $(LINUX_DIR)/arch/arm/boot/dts/$(board).dtb $(BIN_DIR)/$(IMG_PREFIX)-$(board).dtb
+
+               $(call Image/BuildKernel/MkFIT,$(board),$(KDIR)/zImage,$(BIN_DIR)/$(IMG_PREFIX)-$(board).dtb,none,0x10008000,0x10008000)
+               cp $(KDIR)/fit-$(board).itb $(BIN_DIR)/$(IMG_PREFIX)-$(board)-uImage.itb
+
+ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+               $(call Image/BuildKernel/MkFIT,$(board),$(KDIR)/zImage-initramfs,$(BIN_DIR)/$(IMG_PREFIX)-$(board).dtb,none,0x10008000,0x10008000,-initramfs)
+               cp $(KDIR)/fit-$(board)-initramfs.itb $(BIN_DIR)/$(IMG_PREFIX)-$(board)-uImage-initramfs.itb
+ endif
        )
-       cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-zImage
+
+       cp $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
+
+ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+       cp $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs
+ endif
 endef
 
 # board-specific sysupgrade image