+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_ARCH_KIRKWOOD=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
-CONFIG_ARM=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-# CONFIG_ARPD is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CMDLINE="rootdelay=1 root=/dev/mmcblk0p1 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FEROCEON=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DLCI is not set
-CONFIG_DNOTIFY=y
-CONFIG_EXT4_FS=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SCHED_CLOCK=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_HW_RANDOM=y
-CONFIG_INET_LRO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_JBD2=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_MACH_D2NET_V2 is not set
-# CONFIG_MACH_DB88F6281_BP is not set
-CONFIG_MACH_DOCKSTAR=y
-CONFIG_MACH_ESATA_SHEEVAPLUG=y
-CONFIG_MACH_GOFLEXHOME=y
-CONFIG_MACH_GOFLEXNET=y
-# CONFIG_MACH_GURUPLUG is not set
-CONFIG_MACH_ICONNECT=y
-# CONFIG_MACH_INETSPACE_V2 is not set
-# CONFIG_MACH_MV88F6281GTW_GE is not set
-CONFIG_MACH_NAS6210=y
-# CONFIG_MACH_NET2BIG_V2 is not set
-# CONFIG_MACH_NET5BIG_V2 is not set
-# CONFIG_MACH_NETSPACE_MAX_V2 is not set
-# CONFIG_MACH_NETSPACE_V2 is not set
-CONFIG_MACH_NSA310=y
-CONFIG_MACH_OPENRD=y
-CONFIG_MACH_OPENRD_BASE=y
-CONFIG_MACH_OPENRD_CLIENT=y
-# CONFIG_MACH_OPENRD_ULTIMATE is not set
-# CONFIG_MACH_RD88F6192_NAS is not set
-# CONFIG_MACH_RD88F6281 is not set
-CONFIG_MACH_SHEEVAPLUG=y
-# CONFIG_MACH_T5325 is not set
-# CONFIG_MACH_TS219 is not set
-# CONFIG_MACH_TS41X is not set
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
-# CONFIG_MTD_ROOTFS_SPLIT is not set
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
-CONFIG_NET_DSA_TAG_DSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NLS=y
-CONFIG_OUTER_CACHE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PLAT_ORION=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RTC_CLASS=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_UID16=y
-CONFIG_USB=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WAN=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/goflexhome-setup.c
- *
- * Seagate GoFlex Home Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition goflexhome_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_2M + SZ_4M
- }, {
- .name = "root",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data goflexhome_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data goflexhome_sata_data = {
- .n_ports = 1,
-};
-
-static struct gpio_led goflexhome_led_pins[] = {
- {
- .name = "status:green:health",
- .default_trigger = "default-on",
- .gpio = 46,
- .active_low = 1,
- },
- {
- .name = "status:orange:fault",
- .default_trigger = "none",
- .gpio = 47,
- .active_low = 1,
- },
- {
- .name = "status:white:misc",
- .default_trigger = "none",
- .gpio = 40,
- .active_low = 0,
- }
-};
-
-static struct gpio_led_platform_data goflexhome_led_data = {
- .leds = goflexhome_led_pins,
- .num_leds = ARRAY_SIZE(goflexhome_led_pins),
-};
-
-static struct platform_device goflexhome_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &goflexhome_led_data,
- }
-};
-
-static unsigned int goflexhome_mpp_config[] __initdata = {
- MPP29_GPIO, /* USB Power Enable */
- MPP47_GPIO, /* LED Orange */
- MPP46_GPIO, /* LED Green */
- MPP40_GPIO, /* LED White */
- 0
-};
-
-static void __init goflexhome_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
-
- /* setup gpio pin select */
- kirkwood_mpp_conf(goflexhome_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_nand_init(ARRAY_AND_SIZE(goflexhome_nand_parts), 40);
-
- if (gpio_request(29, "USB Power Enable") != 0 ||
- gpio_direction_output(29, 1) != 0)
- printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
- kirkwood_ehci_init();
- kirkwood_ge00_init(&goflexhome_ge00_data);
- kirkwood_sata_init(&goflexhome_sata_data);
-
- platform_device_register(&goflexhome_leds);
-}
-
-MACHINE_START(GOFLEXHOME, "Seagate GoFlex Home")
- /* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
- .atag_offset = 0x100,
- .init_machine = goflexhome_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
- .restart = kirkwood_restart,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/goflexnet-setup.c
- *
- * Seagate GoFlex Net Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition goflexnet_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_4M
- }, {
- .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_32M
- }, {
- .name = "data",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data goflexnet_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_led goflexnet_led_pins[] = {
- {
- .name = "status:green:health",
- .default_trigger = "default-on",
- .gpio = 46, // 0x4000
- .active_low = 1,
- },
- {
- .name = "status:orange:fault",
- .default_trigger = "none",
- .gpio = 47, // 0x8000
- .active_low = 1,
- },
- {
- .name = "status:white:left0",
- .default_trigger = "none",
- .gpio = 42, // 0x0400
- .active_low = 0,
- },
- {
- .name = "status:white:left1",
- .default_trigger = "none",
- .gpio = 43, // 0x0800
- .active_low = 0,
- },
- {
- .name = "status:white:left2",
- .default_trigger = "none",
- .gpio = 44, // 0x1000
- .active_low = 0,
- },
- {
- .name = "status:white:left3",
- .default_trigger = "none",
- .gpio = 45, // 0x2000
- .active_low = 0,
- },
- {
- .name = "status:white:right0",
- .default_trigger = "none",
- .gpio = 38, // 0x0040
- .active_low = 0,
- },
- {
- .name = "status:white:right1",
- .default_trigger = "none",
- .gpio = 39, // 0x0080
- .active_low = 0,
- },
- {
- .name = "status:white:right2",
- .default_trigger = "none",
- .gpio = 40, // 0x0100
- .active_low = 0,
- },
- {
- .name = "status:white:right3",
- .default_trigger = "none",
- .gpio = 41, // 0x0200
- .active_low = 0,
- }
-};
-
-static struct gpio_led_platform_data goflexnet_led_data = {
- .leds = goflexnet_led_pins,
- .num_leds = ARRAY_SIZE(goflexnet_led_pins),
-};
-
-static struct platform_device goflexnet_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &goflexnet_led_data,
- }
-};
-
-static unsigned int goflexnet_mpp_config[] __initdata = {
- MPP29_GPIO, /* USB Power Enable */
- MPP47_GPIO, /* LED Orange */
- MPP46_GPIO, /* LED Green */
- MPP45_GPIO, /* LED Left Capacity 3 */
- MPP44_GPIO, /* LED Left Capacity 2 */
- MPP43_GPIO, /* LED Left Capacity 1 */
- MPP42_GPIO, /* LED Left Capacity 0 */
- MPP41_GPIO, /* LED Right Capacity 3 */
- MPP40_GPIO, /* LED Right Capacity 2 */
- MPP39_GPIO, /* LED Right Capacity 1 */
- MPP38_GPIO, /* LED Right Capacity 0 */
- 0
-};
-
-static void __init goflexnet_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
-
- /* setup gpio pin select */
- kirkwood_mpp_conf(goflexnet_mpp_config);
-
- kirkwood_uart0_init();
- kirkwood_nand_init(ARRAY_AND_SIZE(goflexnet_nand_parts), 40);
-
- if (gpio_request(29, "USB Power Enable") != 0 ||
- gpio_direction_output(29, 1) != 0)
- printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
- kirkwood_ehci_init();
- kirkwood_ge00_init(&goflexnet_ge00_data);
- kirkwood_sata_init(&goflexnet_sata_data);
-
- platform_device_register(&goflexnet_leds);
-}
-
-MACHINE_START(GOFLEXNET, "Seagate GoFlex Net")
- /* Maintainer: Peter Carmichael <peterjncarm@ovi.com> */
- .atag_offset = 0x100,
- .init_machine = goflexnet_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
- .restart = kirkwood_restart,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/iconnect-setup.c
- *
- * Iomega iConnect Wireless
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition iconnect_nand_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = SZ_1M
- }, {
- .name = "uImage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_1M + SZ_2M
- }, {
- .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_32M,
- }, {
- .name = "data",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct gpio_led iconnect_led_pins[] = {
- {
- .name = "iconnect:blue:power",
- .default_trigger = "default-on",
- .gpio = 42,
- },
- {
- .name = "iconnect:red:power",
- .gpio = 43,
- },
- {
- .name = "iconnect:blue:usb1",
- .gpio = 44,
- },
- {
- .name = "iconnect:blue:usb2",
- .gpio = 45,
- },
- {
- .name = "iconnect:blue:usb3",
- .gpio = 46,
- },
- {
- .name = "iconnect:blue:usb4",
- .gpio = 47,
- },
- {
- .name = "iconnect:blue:otb",
- .gpio = 48,
- },
-};
-
-static struct gpio_led_platform_data iconnect_led_data = {
- .leds = iconnect_led_pins,
- .num_leds = ARRAY_SIZE(iconnect_led_pins),
-};
-
-static struct platform_device iconnect_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &iconnect_led_data,
- }
-};
-
-#define ICONNECT_GPIO_KEY_RESET 12
-#define ICONNECT_GPIO_KEY_OTB 35
-
-#define ICONNECT_SW_RESET 0x00
-#define ICONNECT_SW_OTB 0x01
-
-static struct gpio_keys_button iconnect_buttons[] = {
- {
- .type = EV_SW,
- .code = ICONNECT_SW_RESET,
- .gpio = ICONNECT_GPIO_KEY_RESET,
- .desc = "Reset Button",
- .active_low = 1,
- .debounce_interval = 100,
- },
- {
- .type = EV_SW,
- .code = ICONNECT_SW_OTB,
- .gpio = ICONNECT_GPIO_KEY_OTB,
- .desc = "OTB Button",
- .active_low = 1,
- .debounce_interval = 100,
- },
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
- .buttons = iconnect_buttons,
- .nbuttons = ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &iconnect_button_data,
- },
-};
-
-static unsigned int iconnect_mpp_config[] __initdata = {
- MPP12_GPIO, /*Input for reset button*/
- MPP35_GPIO, /*Input for OTB button*/
- MPP42_GPIO,
- MPP43_GPIO,
- MPP44_GPIO,
- MPP45_GPIO,
- MPP46_GPIO,
- MPP47_GPIO,
- MPP48_GPIO,
- 0
-};
-
-static void __init iconnect_init(void)
-{
- u32 dev, rev;
-
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(iconnect_mpp_config);
-
- kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
- kirkwood_ehci_init();
-
- kirkwood_ge00_init(&iconnect_ge00_data);
- kirkwood_pcie_id(&dev, &rev);
-
- kirkwood_uart0_init();
- kirkwood_i2c_init();
-
- platform_device_register(&iconnect_leds);
- platform_device_register(&iconnect_button_device);
-}
-
-static int __init iconnect_pci_init(void)
-{
- if (machine_is_iconnect())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(iconnect_pci_init);
-
-
-MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
- .atag_offset = 0x100,
- .init_machine = iconnect_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
- .restart = kirkwood_restart,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/nas6210-setup.c
- *
- * Raidsonic ICYBOX NAS6210 Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-#define NAS6210_GPIO_POWER_OFF 24
-
-static struct mtd_partition nas6210_nand_parts[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = SZ_512K
- }, {
- .name = "uboot_env",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_128K
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 3 * SZ_1M
- }, {
- .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
-};
-
-static struct mv643xx_eth_platform_data nas6210_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data nas6210_sata_data = {
- .n_ports = 2,
-};
-
-static struct gpio_led nas6210_led_pins[] = {
- {
- .name = "status:green:power",
- .default_trigger = "default-on",
- .gpio = 25,
- .active_low = 0,
- },
- {
- .name = "status:red:power",
- .default_trigger = "none",
- .gpio = 22,
- .active_low = 0,
- },
- {
- .name = "status:red:usb_copy",
- .default_trigger = "none",
- .gpio = 27,
- .active_low = 0,
- },
-};
-
-static struct gpio_led_platform_data nas6210_led_data = {
- .leds = nas6210_led_pins,
- .num_leds = ARRAY_SIZE(nas6210_led_pins),
-};
-
-static struct platform_device nas6210_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &nas6210_led_data,
- }
-};
-
-static struct gpio_keys_button nas6210_buttons[] = {
- {
- .code = KEY_COPY,
- .gpio = 29,
- .desc = "USB Copy",
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 28,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data nas6210_button_data = {
- .buttons = nas6210_buttons,
- .nbuttons = ARRAY_SIZE(nas6210_buttons),
-};
-
-static struct platform_device nas6210_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &nas6210_button_data,
- }
-};
-
-static unsigned int nas6210_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP22_GPIO, /* Power LED red */
- MPP24_GPIO, /* Power off device */
- MPP25_GPIO, /* Power LED green */
- MPP27_GPIO, /* USB transfer LED */
- MPP28_GPIO, /* Reset button */
- MPP29_GPIO, /* USB Copy button */
- 0
-};
-
-static void nas6210_power_off(void)
-{
- gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
-}
-
-static void __init nas6210_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(nas6210_mpp_config);
-
- kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
- kirkwood_ehci_init();
- kirkwood_ge00_init(&nas6210_ge00_data);
- kirkwood_sata_init(&nas6210_sata_data);
- kirkwood_uart0_init();
- platform_device_register(&nas6210_leds);
- platform_device_register(&nas6210_button_device);
- if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
- gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = nas6210_power_off;
- else
- pr_err("nas6210: failed to configure power-off GPIO\n");
-}
-
-static int __init nas6210_pci_init(void)
-{
- if (machine_is_nas6210()) {
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID)
- kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
- else
- kirkwood_pcie_init(KW_PCIE0);
- }
-
- return 0;
-}
-subsys_initcall(nas6210_pci_init);
-
-MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS6210")
- /* Maintainer: <gmbnomis at gmail dot com> */
- .atag_offset = 0x100,
- .init_machine = nas6210_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
- .restart = kirkwood_restart,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/nsa-310-setup.c
- *
- * ZyXEL NSA-310 Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-#define NSA310_GPIO_LED_ESATA_GREEN 12
-#define NSA310_GPIO_LED_ESATA_RED 13
-#define NSA310_GPIO_LED_USB_GREEN 15
-#define NSA310_GPIO_LED_USB_RED 16
-#define NSA310_GPIO_USB_POWER_OFF 21
-#define NSA310_GPIO_LED_SYS_GREEN 28
-#define NSA310_GPIO_LED_SYS_RED 29
-#define NSA310_GPIO_KEY_RESTART 36
-#define NSA310_GPIO_KEY_COPY 37
-#define NSA310_GPIO_LED_COPY_GREEN 39
-#define NSA310_GPIO_LED_COPY_RED 40
-#define NSA310_GPIO_LED_HDD_GREEN 41
-#define NSA310_GPIO_LED_HDD_RED 42
-#define NSA310_GPIO_BUZZER 44
-#define NSA310_GPIO_KEY_POWER 46
-#define NSA310_GPIO_POWER_OFF 48
-
-
-static unsigned int nsa310_mpp_config[] __initdata = {
- MPP12_GPIO,
- MPP13_GPIO,
- MPP15_GPIO,
- MPP16_GPIO,
- MPP21_GPIO,
- MPP28_GPIO,
- MPP29_GPIO,
- MPP36_GPIO,
- MPP37_GPIO,
- MPP39_GPIO,
- MPP40_GPIO,
- MPP41_GPIO,
- MPP42_GPIO,
- MPP44_GPIO,
- MPP46_GPIO,
- MPP48_GPIO,
- 0
-};
-
-static struct mtd_partition nsa310_mtd_parts[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = 0x100000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "uboot_env",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x80000,
- }, {
- .name = "key_store",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x80000,
- }, {
- .name = "info",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x80000,
- }, {
- .name = "etc",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0xa00000,
- }, {
- .name = "kernel_1",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0xa00000,
- }, {
- .name = "rootfs1",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x2fc0000,
- }, {
- .name = "kernel_2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0xa00000,
- }, {
- .name = "rootfs2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x2fc0000,
- },
-};
-
-static struct gpio_led nsa310_leds[] = {
- {
- .name = "nsa310:green:sys",
- .gpio = NSA310_GPIO_LED_SYS_GREEN,
- }, {
- .name = "nsa310:red:sys",
- .gpio = NSA310_GPIO_LED_SYS_RED,
- }, {
- .name = "nsa310:green:hdd",
- .gpio = NSA310_GPIO_LED_HDD_GREEN,
- }, {
- .name = "nsa310:red:hdd",
- .gpio = NSA310_GPIO_LED_HDD_RED,
- }, {
- .name = "nsa310:green:esata",
- .gpio = NSA310_GPIO_LED_ESATA_GREEN,
- }, {
- .name = "nsa310:red:esata",
- .gpio = NSA310_GPIO_LED_ESATA_RED,
- }, {
- .name = "nsa310:green:usb",
- .gpio = NSA310_GPIO_LED_USB_GREEN,
- }, {
- .name = "nsa310:red:usb",
- .gpio = NSA310_GPIO_LED_USB_RED,
- }, {
- .name = "nsa310:green:copy",
- .gpio = NSA310_GPIO_LED_COPY_GREEN,
- }, {
- .name = "nsa310:red:copy",
- .gpio = NSA310_GPIO_LED_COPY_RED,
- },
-};
-
-static struct gpio_led_platform_data nsa310_leds_data = {
- .leds = nsa310_leds,
- .num_leds = ARRAY_SIZE(nsa310_leds),
-};
-
-static struct platform_device nsa310_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &nsa310_leds_data,
- }
-};
-
-static struct gpio_keys_button nsa310_buttons[] = {
- {
- .desc = "Power Button",
- .code = KEY_POWER,
- .type = EV_KEY,
- .gpio = NSA310_GPIO_KEY_POWER,
- .debounce_interval = 1000,
- }, {
- .desc = "Copy Button",
- .code = KEY_COPY,
- .type = EV_KEY,
- .gpio = NSA310_GPIO_KEY_COPY,
- .active_low = 1,
- .debounce_interval = 1000,
- }, {
- .desc = "Reset Button",
- .code = KEY_RESTART,
- .type = EV_KEY,
- .gpio = NSA310_GPIO_KEY_RESTART,
- .active_low = 1,
- .debounce_interval = 1000,
- },
-};
-
-static struct gpio_keys_platform_data nsa310_keys_data = {
- .buttons = nsa310_buttons,
- .nbuttons = ARRAY_SIZE(nsa310_buttons),
-};
-
-static struct platform_device nsa310_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &nsa310_keys_data,
- }
-};
-
-static struct i2c_board_info __initdata nsa310_i2c_info[] = {
- { I2C_BOARD_INFO("adt7476", 0x2e) },
-};
-
-static struct mv_sata_platform_data nsa310_sata_data = {
- .n_ports = 2,
-};
-
-static void nsa310_power_off(void)
-{
- gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
-}
-
-static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
- const char *label)
-{
- int err;
-
- err = gpio_request_one(gpio, flags, label);
- if (err)
- pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
- gpio, label, err);
-
- return err;
-}
-
-static void __init nsa310_gpio_init(void)
-{
- int err;
-
- err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
- "Power Off");
- if (!err)
- pm_power_off = nsa310_power_off;
-
- nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW,
- "USB Power Off");
-}
-
-static void __init nsa310_init(void)
-{
- u32 dev, rev;
-
- kirkwood_init();
- kirkwood_mpp_conf(nsa310_mpp_config);
-
- nsa310_gpio_init();
-
- kirkwood_nand_init(ARRAY_AND_SIZE(nsa310_mtd_parts), 35);
- kirkwood_ehci_init();
-
- kirkwood_pcie_id(&dev, &rev);
-
- kirkwood_sata_init(&nsa310_sata_data);
- kirkwood_uart0_init();
-
- i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
- kirkwood_i2c_init();
-
- platform_device_register(&nsa310_leds_device);
- platform_device_register(&nsa310_keys_device);
-}
-
-static int __init nsa310_pci_init(void)
-{
- if (machine_is_nsa310())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(nsa310_pci_init);
-
-MACHINE_START(NSA310, "ZyXEL NSA-310")
- .atag_offset = 0x100,
- .init_machine = nsa310_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .timer = &kirkwood_timer,
- .restart = kirkwood_restart,
-MACHINE_END
+++ /dev/null
---- a/arch/arm/mach-kirkwood/Makefile
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -8,6 +8,8 @@ obj-$(CONFIG_MACH_SHEEVAPLUG) += sheeva
- obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
- obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
- obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
-+obj-$(CONFIG_MACH_GOFLEXNET) += goflexnet-setup.o
-+obj-$(CONFIG_MACH_GOFLEXHOME) += goflexhome-setup.o
- obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
- obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
- obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
-@@ -18,5 +20,8 @@ obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2
- obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
- obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
- obj-$(CONFIG_MACH_T5325) += t5325-setup.o
-+obj-$(CONFIG_MACH_ICONNECT) += iconnect-setup.o
-+obj-$(CONFIG_MACH_NAS6210) += nas6210-setup.o
-+obj-$(CONFIG_MACH_NSA310) += nsa-310-setup.o
-
- obj-$(CONFIG_CPU_IDLE) += cpuidle.o
---- a/arch/arm/mach-kirkwood/Kconfig
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -64,6 +64,18 @@ config MACH_DOCKSTAR
- Say 'Y' here if you want your kernel to support the
- Seagate FreeAgent DockStar.
-
-+config MACH_GOFLEXNET
-+ bool "Seagate GoFlex Net"
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Seagate GoFlex Net.
-+
-+config MACH_GOFLEXHOME
-+ bool "Seagate GoFlex Home"
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Seagate GoFlex Home.
-+
- config MACH_OPENRD
- bool
-
-@@ -130,6 +142,24 @@ config MACH_T5325
- Say 'Y' here if you want your kernel to support the
- HP t5325 Thin Client.
-
-+config MACH_ICONNECT
-+ bool "Iomega iConnect Wireless"
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ Iomega iConnect Wireless.
-+
-+config MACH_NAS6210
-+ bool "RaidSonic ICY BOX IB-NAS6210"
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ RaidSonic ICY BOX IB-NAS6210 device.
-+
-+config MACH_NSA310
-+ bool "ZyXEL NSA-310"
-+ help
-+ Say 'Y' here if you want your kernel to support the
-+ ZyXEL NSA-310 board.
-+
- endmenu
-
- endif
+++ /dev/null
---- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
-+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
-@@ -33,7 +33,7 @@ static struct mtd_partition sheevaplug_n
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_4M
- }, {
-- .name = "root",
-+ .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- },
+++ /dev/null
---- a/drivers/mmc/core/sd.c
-+++ b/drivers/mmc/core/sd.c
-@@ -389,6 +389,15 @@ int mmc_sd_switch_hs(struct mmc_card *ca
- return -ENOMEM;
- }
-
-+ /*
-+ * Some SDHC cards, notably those with a Sandisk SD controller
-+ * (also found in Kingston products) need a bit of slack
-+ * before successfully handling the SWITCH command. So far,
-+ * cards identifying themselves as "SD04G" and "SD08G" are
-+ * affected
-+ */
-+ udelay(1000);
-+
- err = mmc_sd_switch(card, 1, 0, 1, status);
- if (err)
- goto out;
---- a/drivers/mmc/core/core.c
-+++ b/drivers/mmc/core/core.c
-@@ -529,9 +529,9 @@ void mmc_set_data_timeout(struct mmc_dat
- * The limit is really 250 ms, but that is
- * insufficient for some crappy cards.
- */
-- limit_us = 300000;
-+ limit_us = 500000;
- else
-- limit_us = 100000;
-+ limit_us = 200000;
-
- /*
- * SDHC cards always use these fixed values.
projects / openwrt / openwrt.git / commitdiff