ar71xx: Add eTactica EG-200 support
authorKarl Palsson <karlp@etactica.com>
Thu, 26 May 2016 11:20:53 +0000 (11:20 +0000)
committerJohn Crispin <john@phrozen.org>
Tue, 13 Feb 2018 09:01:53 +0000 (10:01 +0100)
EG-200 is a DIN rail mountable device with one ethernet port, wifi,
an RS-485 port, and an internal USB attached uSD card reader.

Two leds, "modbus" and "etactica" are managed by userspace applications
in factory firmware.

Flash instruction:
    Original firmware is based on OpenWrt.
    Use sysupgrade image directly in vendor GUI.

Signed-off-by: Karl Palsson <karlp@etactica.com>
13 files changed:
package/boot/uboot-envtools/files/ar71xx
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/config-4.9
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/generic/config-default
target/linux/ar71xx/image/generic.mk

index 66eaeb0..cc742e4 100644 (file)
@@ -48,6 +48,7 @@ om5p-ac|\
 om5p-acv2|\
 om5p-an|\
 r36a|\
+rme-eg200|\
 sr3200|\
 tube2h|\
 wndr3700|\
index c45376f..6711fb4 100755 (executable)
@@ -623,6 +623,12 @@ re450)
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
        ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
        ;;
+rme-eg200)
+        ucidef_set_led_netdev "wan" "WAN" "eg200:red:eth0" "eth0"
+        ucidef_set_led_wlan "wlan" "WLAN" "eg200:red:wlan" "phy0tpt"
+        ucidef_set_led_oneshot "modbus" "Modbus" "eg200:red:modbus" "100" "33"
+        ucidef_set_led_default "etactica" "etactica" "eg200:red:etactica" "ignore"
+        ;;
 rocket-m-ti)
        ucidef_set_led_rssi "rssiverylow" "RSSIVERYLOW" "ubnt:green:link1" "wlan0" "1" "100" "0" "13"
        ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:green:link2" "wlan0" "26" "100" "-25" "13"
index b208f38..f131b3b 100755 (executable)
@@ -262,7 +262,8 @@ ar71xx_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "3:wan" "4:lan"
                ;;
-       cap324)
+       cap324|\
+       rme-eg200)
                ucidef_set_interface_lan "eth0" "dhcp"
                ;;
        cpe210|\
index 7c7a0e2..a255b83 100755 (executable)
@@ -670,6 +670,9 @@ ar71xx_board_detect() {
        *"ESR900")
                name="esr900"
                ;;
+       *"eTactica EG-200")
+               name="rme-eg200"
+               ;;
        *"FRITZ!WLAN Repeater 300E")
                name="fritz300e"
                ;;
index 946a886..8f56d1a 100755 (executable)
@@ -262,6 +262,7 @@ platform_check_image() {
        pqi-air-pen|\
        r36a|\
        r602n|\
+       rme-eg200|\
        rocket-m|\
        rocket-m-ti|\
        rocket-m-xw|\
index 447ab01..068b83c 100644 (file)
@@ -170,6 +170,7 @@ CONFIG_ATH79=y
 # CONFIG_ATH79_MACH_RBSXTLITE is not set
 # CONFIG_ATH79_MACH_RE355 is not set
 # CONFIG_ATH79_MACH_RE450 is not set
+# CONFIG_ATH79_MACH_RME_EG200 is not set
 # CONFIG_ATH79_MACH_RUT9XX is not set
 # CONFIG_ATH79_MACH_RW2458N is not set
 # CONFIG_ATH79_MACH_SC1750 is not set
index e5fce99..e495f6b 100644 (file)
@@ -168,6 +168,7 @@ CONFIG_ATH79=y
 # CONFIG_ATH79_MACH_RBSXTLITE is not set
 # CONFIG_ATH79_MACH_RE355 is not set
 # CONFIG_ATH79_MACH_RE450 is not set
+# CONFIG_ATH79_MACH_RME_EG200 is not set
 # CONFIG_ATH79_MACH_RUT9XX is not set
 # CONFIG_ATH79_MACH_RW2458N is not set
 # CONFIG_ATH79_MACH_SC1750 is not set
index eda1e40..248bffb 100644 (file)
@@ -1325,6 +1325,16 @@ config ATH79_MACH_RE450
        select ATH79_DEV_M25P80
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_RME_EG200
+       bool "eTactica EG200 board supprt"
+       select SOC_AR933X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_RUT9XX
        bool "Teltonika RUT900 series support"
        select SOC_AR934X
index 27ef57d..98d4677 100644 (file)
@@ -179,6 +179,7 @@ obj-$(CONFIG_ATH79_MACH_RBSPI)                      += mach-rbspi.o
 obj-$(CONFIG_ATH79_MACH_RBSXTLITE)             += mach-rbsxtlite.o
 obj-$(CONFIG_ATH79_MACH_RE355)                 += mach-re450.o
 obj-$(CONFIG_ATH79_MACH_RE450)                 += mach-re450.o
+obj-$(CONFIG_ATH79_MACH_RME_EG200)             += mach-rme-eg200.o
 obj-$(CONFIG_ATH79_MACH_RUT9XX)                        += mach-rut9xx.o
 obj-$(CONFIG_ATH79_MACH_RW2458N)               += mach-rw2458n.o
 obj-$(CONFIG_ATH79_MACH_SC1750)                        += mach-sc1750.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c
new file mode 100644 (file)
index 0000000..332b078
--- /dev/null
@@ -0,0 +1,99 @@
+/*
+ * eTactica EG-200 board, based on 8devices Carambola2 module
+ *
+ * Copyright (C) 2015 Karl Palsson <karlp@etactica.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define RME_EG200_GPIO_LED_WLAN                        0
+#define RME_EG200_GPIO_LED_ETH0                        13
+#define RME_EG200_GPIO_LED_ETACTICA            15
+#define RME_EG200_GPIO_LED_MODBUS              16
+
+#define RME_EG200_GPIO_BTN_RESTORE             11
+
+#define RME_EG200_KEYS_POLL_INTERVAL           20      /* msecs */
+#define RME_EG200_KEYS_DEBOUNCE_INTERVAL       (3 * RME_EG200_KEYS_POLL_INTERVAL)
+
+#define RME_EG200_MAC0_OFFSET                  0x0000
+#define RME_EG200_CALDATA_OFFSET               0x1000
+#define RME_EG200_WMAC_MAC_OFFSET              0x1002
+
+static struct gpio_led rme_eg200_leds_gpio[] __initdata = {
+       {
+               .name           = "eg200:red:wlan",
+               .gpio           = RME_EG200_GPIO_LED_WLAN,
+               .active_low     = 1,
+       }, {
+               .name           = "eg200:red:eth0",
+               .gpio           = RME_EG200_GPIO_LED_ETH0,
+               .active_low     = 1,
+       }, {
+               .name           = "eg200:red:etactica",
+               .gpio           = RME_EG200_GPIO_LED_ETACTICA,
+               .active_low     = 0,
+       }, {
+               .name           = "eg200:red:modbus",
+               .gpio           = RME_EG200_GPIO_LED_MODBUS,
+               .active_low     = 0,
+       }
+};
+
+static struct gpio_keys_button rme_eg200_keys[] __initdata = {
+       {
+               .desc           = "restore button",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = RME_EG200_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = RME_EG200_GPIO_BTN_RESTORE,
+               .active_low     = 1,
+       },
+};
+
+static void __init rme_eg200_setup(void)
+{
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       ath79_register_m25p80(NULL);
+       ath79_register_wmac(art + RME_EG200_CALDATA_OFFSET,
+                           art + RME_EG200_WMAC_MAC_OFFSET);
+
+       ath79_setup_ar933x_phy4_switch(true, true);
+
+       ath79_init_mac(ath79_eth0_data.mac_addr, art + RME_EG200_MAC0_OFFSET, 0);
+
+       ath79_register_mdio(0, 0x0);
+
+       /* WAN port */
+       ath79_register_eth(0);
+
+       ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+                               AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+                               AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+                               AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+                               AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(rme_eg200_leds_gpio),
+                                rme_eg200_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, RME_EG200_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(rme_eg200_keys),
+                                       rme_eg200_keys);
+       ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RME_EG200, "RME-EG200", "eTactica EG-200",
+               rme_eg200_setup);
index 27269e5..497d794 100644 (file)
@@ -209,6 +209,7 @@ enum ath79_mach_type {
        ATH79_MACH_RB_SXTLITE5ND,               /* Mikrotik RouterBOARD SXT Lite 5nD */
        ATH79_MACH_RE355,                       /* TP-LINK RE355 */
        ATH79_MACH_RE450,                       /* TP-LINK RE450 */
+       ATH79_MACH_RME_EG200,                   /* eTactica EG200 */
        ATH79_MACH_RUT9XX,                      /* Teltonika RUT900 series */
        ATH79_MACH_RW2458N,                     /* Redwave RW2458N */
        ATH79_MACH_SC1750,                      /* Abicom SC1750 */
index 892d33d..9caf29a 100644 (file)
@@ -127,6 +127,7 @@ CONFIG_ATH79_MACH_R36A=y
 CONFIG_ATH79_MACH_R602N=y
 CONFIG_ATH79_MACH_RE355=y
 CONFIG_ATH79_MACH_RE450=y
+CONFIG_ATH79_MACH_RME_EG200=y
 CONFIG_ATH79_MACH_RUT9XX=y
 CONFIG_ATH79_MACH_RW2458N=y
 CONFIG_ATH79_MACH_SC1750=y
index 1e35f1a..eeefde0 100644 (file)
@@ -310,6 +310,19 @@ define Device/ew-dorin-router
 endef
 TARGET_DEVICES += ew-dorin-router
 
+define Device/rme-eg200
+  DEVICE_TITLE := eTactica EG-200
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-oneshot \
+       kmod-usb-serial kmod-usb-serial-ftdi \
+       kmod-usb-storage \
+       kmod-fs-ext4
+  BOARDNAME = RME-EG200
+  IMAGE_SIZE = 16000k
+  CONSOLE = ttyATH0,115200
+  MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += rme-eg200
+
 define Device/weio
   DEVICE_TITLE := WeIO
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2